Hello, I was tasked to install Asterisk 13.16.0. from source on a CentOS7 platform.
For that purpose, I used an unmaintened script of mine, written 10 monthes ago, and I was surprised to get segmentation violations whenever I ran "asterisk -cvvvvvvv -U asterisk". Usually, my /etc/asterisk/modules.conf file includes "autoload=yes" setting. Basically, I see two alternative methods: 1. leave "autoload=yes and remove modules one by one in modules.conf. When segmentation violations stops, then focus on latest disabled module. 2.set "autoload=no and add modules one by one in modules.conf. When segmentation violations starts, then focus on latest enabled module. I've not decided yet which method I should use but I must add here that I'm very suprised to observe things like bellow: *CLI> module show Module Description Use Count Status Support Level res_pjsip.so Basic SIP resource 0 Not Running core 1 modules loaded *CLI> module unload res_pjsip.so Unable to unload resource res_pjsip.so Command 'module unload res_pjsip.so' failed. *CLI> module load reload show unload *CLI> module show Module Description Use Count Status Support Level res_pjsip.so Basic SIP resource 0 Not Running core 1 modules loaded *CLI> module unload res_pjsip.so Unable to unload resource res_pjsip.so Command 'module unload res_pjsip.so ' failed. *CLI> module reload res_pjsip.so The module 'res_pjsip.so' was not properly initialized. Before reloading the module, you must run "module load res_pjsip.so" and fix whatever is preventing the module from being initialized. *CLI> module load res_pjsip.so Unable to load module res_pjsip.so Command 'module load res_pjsip.so' failed. *CLI> module show Module Description Use Count Status Support Level res_pjsip.so Basic SIP resource 0 Not Running core 1 modules loaded Form full file: ... 2017-06-12 10:15:05] WARNING[1649] loader.c: Unload failed, 'res_pjsip.so' is not loaded. My questions are: 1. When autoload=yes, if module foo.so depens on bar.so, does loading of foo.so also loads bar.so ? 2. How shall I understand the above load/unload/reload sequence ? 3. I'm inclined to load modules one by one and set autoload=no, but I would like to be 100% sure to avoid runtime errors due to missing module/config file/dependency/whatever. What would you suggest ? Regards
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users