[    0.000000] Linux version 3.3.0_xo1-20120401.2212.olpc.8a67da9_Aufs (root@puppypc20186) (gcc version 4.3.4 (GCC) ) #1 PREEMPT Sun Apr 1 22:29:16 EEST 2012
[    0.000000] OFW detected in memory, cif @ 0xff83a0d8 (reserving top 8MB)
[    0.000000] Reserving virtual address space above 0xff800000
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e801: 0000000000100000 - 000000000e1ff000 (usable)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.1 present.
[    0.000000] DMI: OLPC XO/XO, BIOS OLPC Ver 1.00.01 02/21/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xe1ff max_arch_pfn = 0x100000
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] Base memory trampoline at [c009e000] 9e000 size 4096
[    0.000000] init_memory_mapping: 0000000000000000-000000000e1ff000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 000e000000 page 2M
[    0.000000]  000e000000 - 000e1ff000 page 4k
[    0.000000] kernel direct mapping tables up to e1ff000 @ bfb000-c00000
[    0.000000] RAMDISK: 0e1ff200 - 0ec00000
[    0.000000] Allocated new RAMDISK: 0d7fe000 - 0e1fee00
[    0.000000] Move RAMDISK from 000000000e1ff200 - 000000000ebfffff to 0d7fe000 - 0e1fedff
[    0.000000] 225MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0e1ff000
[    0.000000]   low ram: 0 - 0e1ff000
[    0.000000] PROM DT: Built device tree with 45056 bytes of memory.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0000e1ff
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0000e1ff
[    0.000000] On node 0 totalpages: 57742
[    0.000000] free_area_init_node: node 0, pgdat c07b3750, node_mem_map cd62b200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 420 pages used for memmap
[    0.000000]   Normal zone: 53339 pages, LIFO batch:15
[    0.000000] Allocating PCI resources starting at e1ff000 (gap: e1ff000:f1e01000)
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 57290
[    0.000000] Kernel command line: console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22 no_console_suspend selinux=0 console=ttyS0,115200 console=tty0 fbcon=font:SUN12x22 no_console_suspend PDEV1=sda1
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 214312k/231420k available (2745k kernel code, 16656k reserved, 1068k data, 244k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff7e5000 - 0xff7ff000   ( 104 kB)
[    0.000000]     vmalloc : 0xce9ff000 - 0xff7e3000   ( 781 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xce1ff000   ( 225 MB)
[    0.000000]       .init : 0xc07ba000 - 0xc07f7000   ( 244 kB)
[    0.000000]       .data : 0xc06ae45c - 0xc07b9500   (1068 kB)
[    0.000000]       .text : 0xc0400000 - 0xc06ae45c   (2745 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] CPU 0 irqstacks, hard=cd006000 soft=cd008000
[    0.000000] Console: colour EGA 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 497.513 MHz processor.
[    0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 995.02 BogoMIPS (lpj=4975130)
[    0.010038] pid_max: default: 4096 minimum: 301
[    0.010339] Security Framework initialized
[    0.010457] Mount-cache hash table entries: 512
[    0.014718] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02
[    0.014929] Performance Events: no PMU driver, software events only.
[    0.020089] devtmpfs: initialized
[    0.020889] NET: Registered protocol family 16
[    0.021957] OLPC board revision C2 (EC=58)
[    0.022743] olpc-xo1-rtc: Initializing OLPC XO-1 RTC
[    0.023135] PCI: Using configuration type OLPC XO-1
[    0.026965] bio: create slab <bio-0> at 0
[    0.027915] SCSI subsystem initialized
[    0.028072] usbcore: registered new interface driver usbfs
[    0.028159] usbcore: registered new interface driver hub
[    0.028279] usbcore: registered new device driver usb
[    0.028622] PCI: Probing PCI hardware
[    0.028638] PCI: Probing PCI hardware (bus 00)
[    0.028653] PCI: root bus 00: using default resources
[    0.028813] PCI host bridge to bus 0000:00
[    0.028836] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.028859] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.028922] pci 0000:00:01.0: [1022:0028] type 0 class 0x000600
[    0.029008] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300
[    0.029040] pci 0000:00:01.1: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.029069] pci 0000:00:01.1: reg 14: [mem 0xfe000000-0xfe003fff]
[    0.029097] pci 0000:00:01.1: reg 18: [mem 0xfe004000-0xfe007fff]
[    0.029125] pci 0000:00:01.1: reg 1c: [mem 0xfe008000-0xfe00bfff]
[    0.029153] pci 0000:00:01.1: reg 20: [mem 0xfe00c000-0xfe00ffff]
[    0.029218] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[    0.029248] pci 0000:00:01.2: reg 10: [mem 0xfe010000-0xfe013fff]
[    0.029357] pci 0000:00:0c.0: [11ab:4100] type 0 class 0x000501
[    0.029403] pci 0000:00:0c.0: reg 10: [mem 0xfe020000-0xfe023fff]
[    0.029558] pci 0000:00:0c.1: [11ab:4101] type 0 class 0x000805
[    0.029604] pci 0000:00:0c.1: reg 10: [mem 0xfe024000-0xfe027fff]
[    0.029708] pci 0000:00:0c.1: supports D1
[    0.029727] pci 0000:00:0c.1: PME# supported from D0 D3hot
[    0.029804] pci 0000:00:0c.2: [11ab:4102] type 0 class 0x000400
[    0.029850] pci 0000:00:0c.2: reg 10: [mem 0xfe028000-0xfe02bfff]
[    0.030029] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[    0.030059] pci 0000:00:0f.0: reg 10: [io  0x18b0-0x18b7]
[    0.030085] pci 0000:00:0f.0: reg 14: [io  0x1000-0x10ff]
[    0.030112] pci 0000:00:0f.0: reg 18: [io  0x1800-0x183f]
[    0.030138] pci 0000:00:0f.0: reg 1c: [io  0x1880-0x189f]
[    0.030165] pci 0000:00:0f.0: reg 20: [io  0x1400-0x147f]
[    0.030191] pci 0000:00:0f.0: reg 24: [io  0x1840-0x187f]
[    0.030257] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
[    0.030287] pci 0000:00:0f.3: reg 10: [io  0x1480-0x14ff]
[    0.030371] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[    0.030403] pci 0000:00:0f.4: reg 10: [mem 0xfe01a000-0xfe01afff]
[    0.030461] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[    0.030525] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[    0.030558] pci 0000:00:0f.5: reg 10: [mem 0xfe01b000-0xfe01bfff]
[    0.030615] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[    0.032598] PCI: pci_cache_line_size set to 32 bytes
[    0.032714] reserve RAM buffer: 000000000009f000 - 000000000009ffff 
[    0.032735] reserve RAM buffer: 000000000e1ff000 - 000000000fffffff 
[    0.033502] Switching to clocksource pit
[    0.040365] PCI: max bus depth: 0 pci_try_num: 1
[    0.040408] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.040432] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.040675] NET: Registered protocol family 2
[    0.040885] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.041387] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.041627] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.041764] TCP: Hash tables configured (established 8192 bind 8192)
[    0.041781] TCP reno registered
[    0.041982] NET: Registered protocol family 1
[    0.042037] pci 0000:00:01.1: Boot video device
[    0.096551] PCI: CLS 32 bytes, default 32
[    0.096781] Trying to unpack rootfs image as initramfs...
[    0.227605] Freeing initrd memory: 10244k freed
[    0.239429] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.240592] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.241322] msgmni has been set to 438
[    0.242079] io scheduler noop registered
[    0.242181] io scheduler cfq registered (default)
[    0.248394] lxfb 0000:00:01.1: 16384 KB of video memory at 0xfd000000
[    0.369922] Console: switching to colour frame buffer device 100x40
[    0.408269] fb0: Geode LX frame buffer device
[    0.408806] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.686605] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[    0.687399] Non-volatile memory driver v1.3
[    0.687437] AMD Geode RNG detected
[    0.694841] brd: module loaded
[    0.698649] loop: module loaded
[    0.698938] cs5535-gpio cs5535-gpio: reserved resource region [io  0x1000-0x10ff]
[    0.698965] gpiochip_add: registered GPIOs 0 to 31 on device: cs5535-gpio
[    0.699423] OLPC XO-1 support registered
[    0.699979] input: Power Button as /devices/pci0000:00/0000:00:0f.0/olpc-xo1-sci-acpi/input/input0
[    0.700378] input: EBook Switch as /devices/pci0000:00/0000:00:0f.0/olpc-xo1-sci-acpi/input/input1
[    0.700780] input: Lid Switch as /devices/pci0000:00/0000:00:0f.0/olpc-xo1-sci-acpi/input/input2
[    0.711290] olpc-xo1-sci-acpi olpc-xo1-sci-acpi: SCI is mapped to IRQ 3
[    0.715431] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[    0.716177] CAFÉ NAND 0000:00:0c.0: enabling device (0000 -> 0002)
[    0.721338] NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
[    0.721369] 2 NAND chips detected
[    0.721570] Bad block table found at page 524224, version 0x01
[    0.721797] Bad block table found at page 524160, version 0x01
[    0.722146] nand_read_bbt: bad block at 0x000023ae0000
[    0.722180] nand_read_bbt: bad block at 0x000026500000
[    0.722196] nand_read_bbt: bad block at 0x000026520000
[    0.722212] nand_read_bbt: bad block at 0x000026540000
[    0.722229] nand_read_bbt: bad block at 0x000026560000
[    0.722329] nand_read_bbt: bad block at 0x000033ae0000
[    0.722413] nand_read_bbt: bad block at 0x00003e500000
[    0.722429] nand_read_bbt: bad block at 0x00003e520000
[    0.722445] nand_read_bbt: bad block at 0x00003e540000
[    0.722462] nand_read_bbt: bad block at 0x00003e560000
[    0.722907] Searching for RedBoot partition table in cafe_nand at offset 0x0
[    0.729388] 3 RedBoot partitions found on MTD device cafe_nand
[    0.729407] Creating 3 MTD partitions on "cafe_nand":
[    0.729432] 0x000000000000-0x000000020000 : "FIS directory"
[    0.729847] 0x000000020000-0x000001820000 : "boot"
[    0.730224] 0x000001820000-0x00003ffc0000 : "system"
[    0.732312] Initializing USB Mass Storage driver...
[    0.732429] usbcore: registered new interface driver usb-storage
[    0.732446] USB Mass Storage support registered.
[    0.732541] usbcore: registered new interface driver libusual
[    0.744017] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.744233] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.745605] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.745655] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.745895] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[    0.745952] Linux video capture interface: v2.00
[    0.781720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.837351] cpuidle: using governor ladder
[    0.837368] cpuidle: using governor menu
[    0.837426] sdhci: Secure Digital Host Controller Interface driver
[    0.837442] sdhci: Copyright(c) Pierre Ossman
[    0.837506] sdhci-pci 0000:00:0c.1: SDHCI controller found [11ab:4101] (rev 10)
[    0.837542] sdhci-pci 0000:00:0c.1: enabling device (0000 -> 0002)
[    0.837572] sdhci-pci 0000:00:0c.1: Invalid iomem size. You may experience problems.
[    0.837785] Registered led device: mmc0::
[    0.838957] mmc0: SDHCI controller on PCI [0000:00:0c.1] using DMA
[    0.848552] geode-aes: GEODE AES engine enabled.
[    0.848744] i2c-core: driver [olpc_dcon] using legacy suspend method
[    0.848762] i2c-core: driver [olpc_dcon] using legacy resume method
[    0.849485] olpc-dcon:  Discovered DCON version 2
[    0.853376] TCP bic registered
[    0.853389] Initializing XFRM netlink socket
[    0.853678] NET: Registered protocol family 10
[    0.854368] Mobile IPv6
[    0.854386] NET: Registered protocol family 17
[    0.854411] Registering the dns_resolver key type
[    0.856454] Freeing unused kernel memory: 244k freed
[    0.857191] Write protecting the kernel text: 2748k
[    0.857326] Write protecting the kernel read-only data: 872k
[    1.017372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.017399] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[    1.017534] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[    1.017557] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[    1.017630] drivers/usb/core/inode.c: creating file 'devices'
[    1.017661] drivers/usb/core/inode.c: creating file '001'
[    1.017692] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[    1.017742] ehci_hcd 0000:00:0f.5: reset hcs_params 0x1414 dbg=0 cc=1 pcc=4 ordered ports=4
[    1.017774] ehci_hcd 0000:00:0f.5: reset hcc_params 0012 thresh 1 uframes 256/512/1024
[    1.017883] ehci_hcd 0000:00:0f.5: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    1.017910] ehci_hcd 0000:00:0f.5: ...powerup ports...
[    1.046539] ehci_hcd 0000:00:0f.5: cache line size of 32 is not supported
[    1.046561] ehci_hcd 0000:00:0f.5: supports USB remote wakeup
[    1.046607] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xfe01b000
[    1.046643] ehci_hcd 0000:00:0f.5: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[    1.066547] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[    1.066674] usb usb1: default language 0x0409
[    1.066726] usb usb1: udev 1, busnum 1, minor = 0
[    1.066747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.066772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.066794] usb usb1: Product: EHCI Host Controller
[    1.066815] usb usb1: Manufacturer: Linux 3.3.0_xo1-20120401.2212.olpc.8a67da9_Aufs ehci_hcd
[    1.066838] usb usb1: SerialNumber: 0000:00:0f.5
[    1.067382] usb usb1: usb_probe_device
[    1.067405] usb usb1: configuration #1 chosen from 1 choice
[    1.067456] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    1.067627] hub 1-0:1.0: usb_probe_interface
[    1.067646] hub 1-0:1.0: usb_probe_interface - got id
[    1.067667] hub 1-0:1.0: USB hub found
[    1.067698] hub 1-0:1.0: 4 ports detected
[    1.067716] hub 1-0:1.0: standalone hub
[    1.067732] hub 1-0:1.0: individual port power switching
[    1.067751] hub 1-0:1.0: individual port over-current protection
[    1.067772] hub 1-0:1.0: power on to power good time: 20ms
[    1.067803] hub 1-0:1.0: local power source is good
[    1.067823] hub 1-0:1.0: enabling power on all ports
[    1.068007] drivers/usb/core/inode.c: creating file '001'
[    1.166607] ehci_hcd 0000:00:0f.5: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
[    1.166647] hub 1-0:1.0: port 1: status 0501 change 0001
[    1.166706] ehci_hcd 0000:00:0f.5: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
[    1.166736] hub 1-0:1.0: port 4: status 0501 change 0001
[    1.181416] psmouse serio1: hgpk: ID: 67 00 50
[    1.181437] psmouse serio1: hgpk: OLPC touchpad revision 0x50
[    1.236536] Switching to clocksource tsc
[    1.270102] hub 1-0:1.0: state 7 ports 4 chg 0012 evt 0000
[    1.270152] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[    1.330311] ehci_hcd 0000:00:0f.5: port 1 high speed
[    1.330353] ehci_hcd 0000:00:0f.5: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.390075] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.450214] ehci_hcd 0000:00:0f.5: port 1 high speed
[    1.450256] ehci_hcd 0000:00:0f.5: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.542628] usb 1-1: default language 0x0409
[    1.543873] usb 1-1: udev 2, busnum 1, minor = 1
[    1.543896] usb 1-1: New USB device found, idVendor=1286, idProduct=2001
[    1.543920] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.543942] usb 1-1: Product: MARVELL Wireless Device
[    1.543962] usb 1-1: Manufacturer: Marvell
[    1.544425] usb 1-1: usb_probe_device
[    1.544448] usb 1-1: configuration #1 chosen from 1 choice
[    1.545498] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[    1.545931] drivers/usb/core/inode.c: creating file '002'
[    1.546084] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[    1.586811] Marvell M88ALP01 'CAFE' Camera Controller version 2
[    1.586902] cafe1000-ccic 0000:00:0c.2: enabling device (0000 -> 0002)
[    1.600237] ehci_hcd 0000:00:0f.5: port 4 high speed
[    1.600277] ehci_hcd 0000:00:0f.5: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.611478] input: OLPC HGPK ALPS HGPK as /devices/platform/i8042/serio1/input/input4
[    1.660066] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[    1.720261] ehci_hcd 0000:00:0f.5: port 4 high speed
[    1.720299] ehci_hcd 0000:00:0f.5: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
[    1.740119] mmc0: new high speed SDHC card at address b368
[    1.750077] mmcblk0: mmc0:b368 SDC   3.72 GiB 
[    1.753013]  mmcblk0: p1 p2
[    1.810558] usb 1-4: default language 0x0409
[    1.810932] usb 1-4: udev 3, busnum 1, minor = 2
[    1.810954] usb 1-4: New USB device found, idVendor=0781, idProduct=5151
[    1.810978] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.811000] usb 1-4: Product: Cruzer Micro
[    1.811018] usb 1-4: Manufacturer: SanDisk
[    1.811036] usb 1-4: SerialNumber: 35134309CAD35E27
[    1.811470] usb 1-4: usb_probe_device
[    1.811494] usb 1-4: configuration #1 chosen from 1 choice
[    1.811699] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
[    1.811930] usb-storage 1-4:1.0: usb_probe_interface
[    1.811983] usb-storage 1-4:1.0: usb_probe_interface - got id
[    1.820085] usb-storage: device found at 3
[    1.820161] scsi0 : usb-storage 1-4:1.0
[    1.820609] usb-storage: waiting for device to settle before scanning
[    1.820823] drivers/usb/core/inode.c: creating file '003'
[    1.941549] ov7670 1-0021: chip found @ 0x42 (cafe_ccic)
[    2.176108] snd_cs5535audio 0000:00:0f.3: setting latency timer to 64
[    2.179856] Failure reading codec reg 0x7e,Last value=0x7e805368
[    2.180102] Failure reading codec reg 0x7e,Last value=0x7e805368
[    2.276216] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.276240] ohci_hcd: block sizes: ed 64 td 64
[    2.276380] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[    2.276404] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[    2.276457] drivers/usb/core/inode.c: creating file '002'
[    2.276496] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[    2.276578] ohci_hcd 0000:00:0f.4: created debug files
[    2.276597] ohci_hcd 0000:00:0f.4: supports USB remote wakeup
[    2.276642] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xfe01a000
[    2.362114] ohci_hcd 0000:00:0f.4: OHCI controller state
[    2.362141] ohci_hcd 0000:00:0f.4: OHCI 1.0, NO legacy support registers, rh state running
[    2.362172] ohci_hcd 0000:00:0f.4: control 0x283 RWC HCFS=operational CBSR=3
[    2.362198] ohci_hcd 0000:00:0f.4: cmdstatus 0x00000 SOC=0
[    2.362224] ohci_hcd 0000:00:0f.4: intrstatus 0x00000004 SF
[    2.362250] ohci_hcd 0000:00:0f.4: intrenable 0x8000005a MIE RHSC UE RD WDH
[    2.362277] ohci_hcd 0000:00:0f.4: hcca frame #0021
[    2.362304] ohci_hcd 0000:00:0f.4: roothub.a 10000204 POTPGT=16 NPS NDP=4(4)
[    2.362330] ohci_hcd 0000:00:0f.4: roothub.b 00000000 PPCM=0000 DR=0000
[    2.362355] ohci_hcd 0000:00:0f.4: roothub.status 00008000 DRWE
[    2.362384] ohci_hcd 0000:00:0f.4: roothub.portstatus [0] 0x00000100 PPS
[    2.362413] ohci_hcd 0000:00:0f.4: roothub.portstatus [1] 0x00000100 PPS
[    2.362443] ohci_hcd 0000:00:0f.4: roothub.portstatus [2] 0x00000100 PPS
[    2.362472] ohci_hcd 0000:00:0f.4: roothub.portstatus [3] 0x00000100 PPS
[    2.362544] usb usb2: default language 0x0409
[    2.362596] usb usb2: udev 1, busnum 2, minor = 128
[    2.362617] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.362642] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.362664] usb usb2: Product: OHCI Host Controller
[    2.362685] usb usb2: Manufacturer: Linux 3.3.0_xo1-20120401.2212.olpc.8a67da9_Aufs ohci_hcd
[    2.362708] usb usb2: SerialNumber: 0000:00:0f.4
[    2.363237] usb usb2: usb_probe_device
[    2.363260] usb usb2: configuration #1 chosen from 1 choice
[    2.363311] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    2.363479] hub 2-0:1.0: usb_probe_interface
[    2.363498] hub 2-0:1.0: usb_probe_interface - got id
[    2.363520] hub 2-0:1.0: USB hub found
[    2.363565] hub 2-0:1.0: 4 ports detected
[    2.363583] hub 2-0:1.0: standalone hub
[    2.363599] hub 2-0:1.0: no power switching (usb 1.0)
[    2.363618] hub 2-0:1.0: global over-current protection
[    2.363638] hub 2-0:1.0: power on to power good time: 32ms
[    2.363670] hub 2-0:1.0: local power source is good
[    2.363689] hub 2-0:1.0: no over-current condition exists
[    2.363710] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    2.363852] drivers/usb/core/inode.c: creating file '001'
[    2.364034] ehci_hcd 0000:00:0f.5: HS companion for 0000:00:0f.4
[    2.460214] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[    2.464198] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.493372] aufs 3.3-20120326
[    2.502336] fuse init (API version 7.18)
[    2.703639] usbcore: registered new interface driver usbhid
[    2.703659] usbhid: USB HID core driver
[    2.721553] EXT4-fs (mmcblk0p1): mounting ext2 file system using the ext4 subsystem
[    2.731182] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[    2.742241] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[    4.830855] scsi 0:0:0:0: Direct-Access     SanDisk  Cruzer           6.01 PQ: 0 ANSI: 0 CCS
[    4.832896] sd 0:0:0:0: [sda] 7858175 512-byte logical blocks: (4.02 GB/3.74 GiB)
[    4.833507] sd 0:0:0:0: [sda] Write Protect is off
[    4.833534] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
[    4.834134] sd 0:0:0:0: [sda] No Caching mode page present
[    4.834156] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.835162] usb-storage: device scan complete
[    4.837372] sd 0:0:0:0: [sda] No Caching mode page present
[    4.837394] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.839261]  sda: sda1
[    4.842642] sd 0:0:0:0: [sda] No Caching mode page present
[    4.842666] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.842689] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    5.050093] hub 2-0:1.0: hub_suspend
[    5.050128] usb usb2: bus auto-suspend, wakeup 1
[    5.050149] ohci_hcd 0000:00:0f.4: suspend root hub
[    7.959826] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[    7.972758] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[    7.973852] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.971718] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   14.984783] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[   14.985866] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.369996] aufs test_add:261:mount[597]: uid/gid/perm /pup_ro2 0/0/0755, 0/0/01777
>[   26.740515] udev[1665]: starting version 167
[   29.645273] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   31.302280] lib80211: common routines for IEEE802.11 drivers
[   31.302304] lib80211_crypt: registered algorithm 'NULL'
[   31.354022] cfg80211: Calling CRDA to update world regulatory domain
[   31.414504] usb8xxx 1-1:1.0: usb_probe_interface
[   31.414531] usb8xxx 1-1:1.0: usb_probe_interface - got id
[   31.434387] mousedev: PS/2 mouse device common for all mice
[   31.841961] usb8xxx: failed to find firmware (-2)
[   32.010194] ehci_hcd 0000:00:0f.5: port 1 high speed
[   32.010236] ehci_hcd 0000:00:0f.5: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   32.070082] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[   32.130212] ehci_hcd 0000:00:0f.5: port 1 high speed
[   32.130250] ehci_hcd 0000:00:0f.5: GetStatus port:1 status 001005 0  ACK POWER sig=se0 PE CONNECT
[   32.330090] usb8xxx: probe of 1-1:1.0 failed with error -12
[   32.332096] usbcore: registered new interface driver usb8xxx
[   33.259097] Adding 253948k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:253948k SS
[   46.249850] input: olpc-kbdshim virtual input as /devices/virtual/input/input5
[   51.344826] dcon_freeze_store: 0
