Re: [Chevelle-list] front coil springs

[Rick Schaefer]

  What year?   On later  years (68-72) the end of the spring coil is suppose
to be located between those 2 holes.  IE One hole will be blocked by the
spring & one hole will be open when viewed from below..   Don't know about
earlier years.

On 6/13/08, Jim H. Thompson <[EMAIL PROTECTED]> wrote:
>
>  Depends on the year. Some control arms are indented for the end of the
> spring. I did not use spacers on the front the rear had them on top.
>
>
>
> *From:* [EMAIL PROTECTED] [mailto:
> [EMAIL PROTECTED] *On Behalf Of *Jim & Chris
> *Sent:* Friday, June 13, 2008 7:07 PM
> *To:* chevelle-list@chevelles.net
> *Cc:* [EMAIL PROTECTED]
> *Subject:* [Chevelle-list] front coil springs
>
>
>
> *I have two questions 1.) where does the bottom end of the front coil
> spring sit in the lower control arm ? the deepest part is after the 2 weep
> holes clockwise looking down. 2.) should there be rubber spaceres between
> the spring and fram/ control arm ? I've done this before but I don't think I
> did it right. driver side sat 3/4 "in. lower than pass side. thanks for any
> help, Jimmy .C*
>



-- 
Rick Schaefer
72 TPI El Camino