Jim & Chris
Fri, 13 Jun 2008 20:35:56 -0700
Rick,its a"72" BBC, Jimmy.C
----- Original Message -----
From: Rick Schaefer
To: [EMAIL PROTECTED] ; The Chevelle Mailing List
Sent: Friday, June 13, 2008 9:32 PM
Subject: Re: [Chevelle-list] front coil springs
What year? On later years (68-72) the end of the spring coil is suppose
to be located between those 2 holes. IE One hole will be blocked by the spring
& one hole will be open when viewed from below.. Don't know about earlier
years.
On 6/13/08, Jim H. Thompson <[EMAIL PROTECTED]> wrote:
Depends on the year. Some control arms are indented for the end of the
spring. I did not use spacers on the front the rear had them on top.
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Jim & Chris
Sent: Friday, June 13, 2008 7:07 PM
To: chevelle-list@chevelles.net
Cc: [EMAIL PROTECTED]
Subject: [Chevelle-list] front coil springs
I have two questions 1.) where does the bottom end of the front coil spring
sit in the lower control arm ? the deepest part is after the 2 weep holes
clockwise looking down. 2.) should there be rubber spaceres between the spring
and fram/ control arm ? I've done this before but I don't think I did it right.
driver side sat 3/4 "in. lower than pass side. thanks for any help, Jimmy .C
--
Rick Schaefer
72 TPI El Camino
------------------------------------------------------------------------------
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.13.36/1041 - Release Date: 10/1/2007
10:20 AM