Joshua Barnes
Tue, 28 Jan 2003 16:41:50 -0800
If you have the DSL router just add this line ip nat inside source static that will allow your VPN clients through your NAT router to the VPN termination point.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Michael Vasilenko Sent: Tuesday, January 28, 2003 3:07 PM To: [EMAIL PROTECTED] Subject: VPN with cilents behind NAT [7:62058] Hello I need to implement VPN, which will be able to used by data transfers and VoIP with server on public IP and clients, connected to internet by xDSL router/modem/switch with real dynamic IP (allocated by DHCP). As far as I understood, I need to setup IPSec tunnel from CO to each client. And VPDN is not the way to go. Am I correct? Any help would be fine. Thanks. -- Michael Vasilenko Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62073&t=62058 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]