Package: linux-image-2.6.28-1-686
Version: 2.6.28-1
Severity: normal

Whenever booting the kernel on my VIA mainboard, it hangs, and I need to CTRL-C 
the VIA RNG module initialization.

The same problem seems to have been reported here : 
http://bugs.archlinux.org/task/12823 but couldn't google anything else on the 
subject.

Best regards,


-- Package-specific info:
** Version:
Linux version 2.6.28-1-686 (Debian 2.6.28-1) (m...@debian.org) (gcc version 
4.3.3 (Debian 4.3.3-4) ) #1 SMP Mon Feb 23 03:13:24 UTC 2009

** Command line:
root=/dev/hdd3 ro single

** Tainted: P W (513)

** Kernel log:
[    6.643547] EXT3-fs: write access will be enabled during recovery.
[    7.525412] kjournald starting.  Commit interval 5 seconds
[    7.525505] EXT3-fs: recovery complete.
[    7.604455] EXT3-fs: mounted filesystem with ordered data mode.
[    8.417375] udevd version 125 started
[   10.970601] Linux agpgart interface v0.103
[   11.006927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.137633] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.205763] agpgart: Detected VIA CX700 chipset
[   11.216614] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[   12.617329] input: PC Speaker as /devices/platform/pcspkr/input/input1
[   13.146745] input: Power Button (FF) as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   13.156025] ACPI: Power Button (FF) [PWRF]
[   13.156305] input: Sleep Button (CM) as 
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[   13.170305] ACPI: Sleep Button (CM) [SLPB]
[   13.170607] input: Power Button (CM) as 
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   13.188049] ACPI: Power Button (CM) [PWRB]
[   13.928203] input: ImPS/2 Generic Wheel Mouse as 
/devices/platform/i8042/serio1/input/input5
[   14.299027] parport_pc 00:07: reported by Plug and Play ACPI
[   14.299134] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   14.431417] ndiswrapper version 1.54 loaded (smp=yes, preempt=no)
[   15.670558] ndiswrapper: driver vnwl (VIA,07/21/2008,2.17.00.3000) loaded
[   15.671089] ndiswrapper 0000:03:06.0: PCI INT A -> GSI 19 (level, low) -> 
IRQ 19
[   15.677492] ndiswrapper: using IRQ 19
[   16.456809] wlan0: ethernet device 00:18:02:06:4c:f2 using NDIS driver: 
vnwl, version: 0x20011, NDIS version: 0x500, vendor: 'VIA Networking 
Technologies PCI-Cardbus Wireless LAN Adapter  ', 1106:3253.5.conf
[   16.456962] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, 
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   16.457168] usbcore: registered new interface driver ndiswrapper
[   17.189181] HDA Intel 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 
17
[   17.189433] HDA Intel 0000:02:01.0: setting latency timer to 64
[   17.189443] HDA Intel 0000:02:01.0: PCI: Disallowing DAC for device
[   20.488059] Adding 393584k swap on /dev/hdd2.  Priority:-1 extents:1 
across:393584k
[   20.698084] EXT3 FS on hdd3, internal journal
[   21.692031] loop: module loaded
[   21.766046] VIA RNG detected
[   21.795556] padlock: Using VIA PadLock ACE for AES algorithm.
[  144.536596] ------------[ cut here ]------------
[  144.536660] WARNING: at crypto/algapi.c:293 crypto_wait_for_test+0x4b/0x53()
[  144.536722] Modules linked in: sha1_generic padlock_sha(+) padlock_aes 
aes_generic via_rng rng_core loop snd_hda_intel snd_pcm snd_seq snd_timer 
snd_seq_device snd evdev soundcore snd_page_alloc ndiswrapper parport_pc 
parport psmouse button serio_raw pcspkr i2c_viapro i2c_core via_agp shpchp 
pci_hotplug agpgart ext3 jbd mbcache ide_gd_mod ata_generic libata scsi_mod 
8139too 8139cp mii uhci_hcd ehci_hcd via82cxxx ide_pci_generic usbcore ide_core 
thermal processor fan thermal_sys
[  144.538877] Pid: 1649, comm: modprobe Tainted: P           2.6.28-1-686 #1
[  144.538938] Call Trace:
[  144.539004]  [<c0126dd9>] warn_on_slowpath+0x40/0x61
[  144.539067]  [<c0120f20>] check_preempt_wakeup+0x138/0x171
[  144.539129]  [<c0121f16>] try_to_wake_up+0x168/0x172
[  144.539193]  [<c02e5c92>] schedule_timeout+0x14/0xbb
[  144.539267]  [<c013a302>] notifier_call_chain+0x2a/0x47
[  144.539332]  [<c02e700f>] _spin_lock_irq+0x13/0x15
[  144.539392]  [<c02e5384>] wait_for_common+0x111/0x12d
[  144.539453]  [<c0121f20>] default_wake_function+0x0/0x8
[  144.539514]  [<c01e5087>] crypto_wait_for_test+0x4b/0x53
[  144.539576]  [<c01e5158>] crypto_register_alg+0x3f/0x44
[  144.539644]  [<dc995000>] padlock_init+0x0/0x68 [padlock_sha]
[  144.539707]  [<dc995032>] padlock_init+0x32/0x68 [padlock_sha]
[  144.539770]  [<dc995000>] padlock_init+0x0/0x68 [padlock_sha]
[  144.539832]  [<c0101138>] _stext+0x50/0x17a
[  144.539897]  [<c01461d0>] load_module+0x15ef/0x177b
[  144.539979]  [<c0176238>] vma_link+0x51/0x75
[  144.540050]  [<c0176253>] vma_link+0x6c/0x75
[  144.540127]  [<c013a56a>] blocking_notifier_call_chain+0x9/0xc
[  144.540193]  [<c0146499>] sys_init_module+0x87/0x174
[  144.540256]  [<c01038e3>] sysenter_do_call+0x12/0x2f
[  144.540315] ---[ end trace 2d77b5519b6ee597 ]---
[  144.540536] ------------[ cut here ]------------
[  144.540595] WARNING: at crypto/algapi.c:293 crypto_wait_for_test+0x4b/0x53()
[  144.540655] Modules linked in: sha1_generic padlock_sha(+) padlock_aes 
aes_generic via_rng rng_core loop snd_hda_intel snd_pcm snd_seq snd_timer 
snd_seq_device snd evdev soundcore snd_page_alloc ndiswrapper parport_pc 
parport psmouse button serio_raw pcspkr i2c_viapro i2c_core via_agp shpchp 
pci_hotplug agpgart ext3 jbd mbcache ide_gd_mod ata_generic libata scsi_mod 
8139too 8139cp mii uhci_hcd ehci_hcd via82cxxx ide_pci_generic usbcore ide_core 
thermal processor fan thermal_sys
[  144.542775] Pid: 1649, comm: modprobe Tainted: P        W  2.6.28-1-686 #1
[  144.542836] Call Trace:
[  144.542893]  [<c0126dd9>] warn_on_slowpath+0x40/0x61
[  144.542954]  [<c0120f20>] check_preempt_wakeup+0x138/0x171
[  144.543015]  [<c0121f16>] try_to_wake_up+0x168/0x172
[  144.543083]  [<c01e7ed6>] cryptomgr_notify+0x27e/0x2a0
[  144.543146]  [<c013a302>] notifier_call_chain+0x2a/0x47
[  144.543210]  [<c02e700f>] _spin_lock_irq+0x13/0x15
[  144.543270]  [<c02e5384>] wait_for_common+0x111/0x12d
[  144.543338]  [<c0121f20>] default_wake_function+0x0/0x8
[  144.543399]  [<c01e5087>] crypto_wait_for_test+0x4b/0x53
[  144.543460]  [<c01e5158>] crypto_register_alg+0x3f/0x44
[  144.543523]  [<dc995042>] padlock_init+0x42/0x68 [padlock_sha]
[  144.543586]  [<dc995000>] padlock_init+0x0/0x68 [padlock_sha]
[  144.543647]  [<c0101138>] _stext+0x50/0x17a
[  144.543707]  [<c01461d0>] load_module+0x15ef/0x177b
[  144.543784]  [<c0176238>] vma_link+0x51/0x75
[  144.543844]  [<c0176253>] vma_link+0x6c/0x75
[  144.543920]  [<c013a56a>] blocking_notifier_call_chain+0x9/0xc
[  144.543985]  [<c0146499>] sys_init_module+0x87/0x174
[  144.544057]  [<c01038e3>] sysenter_do_call+0x12/0x2f
[  144.544115] ---[ end trace 2d77b5519b6ee597 ]---
[  144.544173] padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[  144.560088] alg: Unexpected test result for sha1-padlock: 0
[  144.911981] alg: Unexpected test result for sha256-padlock: 0
[  184.427859] longhaul: APIC detected. Longhaul is currently broken in this 
configuration.
[  185.363514] NET: Registered protocol family 10
[  185.364936] lo: Disabled Privacy Extensions
[  189.197860] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[  193.543518] [drm] Initialized drm 1.1.0 20060810
[  193.559368] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  193.560075] [drm] Initialized via 2.11.1 20070202 on minor 0
[  193.588958] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[  193.589003] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[  193.589063] pci 0000:01:00.0: putting AGP V3 device into 8x mode
[  196.064037] wlan0: no IPv6 routers present

** Loaded modules:
Module                  Size  Used by
via                    35200  2 
drm                    76456  3 via
ipv6                  231536  22 
battery                10116  0 
cpufreq_stats           3844  0 
cpufreq_conservative     5672  0 
cpufreq_powersave       1536  0 
cpufreq_userspace       2916  0 
ext2                   54024  1 
sha256_generic         11392  0 
sha1_generic            2208  0 
padlock_sha             3648  0 
padlock_aes             4704  0 
aes_generic            27784  1 padlock_aes
via_rng                 2080  0 
rng_core                3908  1 via_rng
loop                   13036  0 
snd_hda_intel         362712  0 
snd_pcm                63332  1 snd_hda_intel
snd_seq                41576  0 
snd_timer              17992  2 snd_pcm,snd_seq
snd_seq_device          6412  1 snd_seq
snd                    45912  5 
snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
evdev                   8356  4 
soundcore               6440  1 snd
snd_page_alloc          8200  2 snd_hda_intel,snd_pcm
ndiswrapper           153364  0 
parport_pc             22388  0 
parport                30964  1 parport_pc
psmouse                36752  0 
button                  6032  0 
serio_raw               4836  0 
pcspkr                  2368  0 
i2c_viapro              7028  0 
i2c_core               20948  1 i2c_viapro
via_agp                 7840  1 
shpchp                 27316  0 
pci_hotplug            23648  1 shpchp
agpgart                30740  2 drm,via_agp
ext3                  105704  1 
jbd                    41492  1 ext3
mbcache                 7396  2 ext2,ext3
ide_gd_mod             19396  4 
ata_generic             4644  0 
libata                148108  1 ata_generic
scsi_mod              135628  1 libata
8139too                21472  0 
8139cp                 17568  0 
mii                     4928  2 8139too,8139cp
uhci_hcd               19632  0 
ehci_hcd               30188  0 
via82cxxx               6244  3 
ide_pci_generic         3652  0 
usbcore               122204  4 ndiswrapper,uhci_hcd,ehci_hcd
ide_core               95256  3 ide_gd_mod,via82cxxx,ide_pci_generic
thermal                15292  0 
processor              40044  1 thermal
fan                     4388  0 
thermal_sys            10536  3 thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge 
[1106:0324] (rev 03)
        Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:0324]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 8
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [80] AGP version 3.5
                Status: RQ=8 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 
64bit- FW+ AGP3+ Rate=x4,x8
                Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: agpgart-via
        Kernel modules: via-agp

00:00.1 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge 
[1106:1324]
        Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:1324]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.2 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge 
[1106:2324]
        Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:2324]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.3 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge 
[1106:3324]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.4 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge 
[1106:4324]
        Subsystem: VIA Technologies, Inc. CX700/VX700 Host Bridge [1106:4324]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Host Bridge 
[1106:7324]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge 
[1106:b198] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: fc800000-fe8fffff
        Prefetchable memory behind bridge: aff00000-efefffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR+
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: shpchp

00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VX800 Serial ATA and EIDE 
Controller [1106:5324] (prog-if 8a [Master SecP PriP])
        Subsystem: VIA Technologies, Inc. Device [1106:0581]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
[size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
[size=1]
        Region 4: I/O ports at fc00 [size=16]
        Capabilities: [b0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: VIA_IDE
        Kernel modules: via82cxxx

00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller [1106:3038] (rev 90) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller 
[1106:3038]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at ec00 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 
90) (prog-if 20 [EHCI])
        Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin D routed to IRQ 23
        Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [88] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:11.0 ISA bridge [0601]: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge 
[1106:8324]
        Subsystem: VIA Technologies, Inc. CX700/VX700 PCI to ISA Bridge 
[1106:8324]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: i2c-viapro

00:11.7 Host bridge [0600]: VIA Technologies, Inc. CX700/VX700 Internal Module 
Bus [1106:324e]
        Subsystem: VIA Technologies, Inc. CX700/VX700 Internal Module Bus 
[1106:324e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 128
        Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration

00:13.0 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 Host Bridge 
[1106:324b] (prog-if 00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: fe900000-fe9fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Kernel modules: shpchp

00:13.1 PCI bridge [0604]: VIA Technologies, Inc. CX700/VX700 PCI to PCI Bridge 
[1106:324a] (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fea00000-feafffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. CX700/VX700 
[S3 UniChrome Pro] [1106:3157] (rev 03) (prog-if 00 [VGA controller])
        Subsystem: Device [0908:1975]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c0000000 (32-bit, prefetchable) [size=512M]
        Region 1: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Expansion ROM at fe8f0000 [disabled] [size=64K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] AGP version 3.0
                Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans- 
64bit- FW- AGP3+ Rate=x4,x8
                Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8

02:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA 
High Definition Audio Controller) [1106:3288] (rev 10)
        Subsystem: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High 
Definition Audio Controller) [1106:3288]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend+
                LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency 
L0 <64ns, L1 <1us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- 
DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

03:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at d800 [size=256]
        Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: 8139too
        Kernel modules: 8139cp, 8139too

03:04.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller 
[1106:3038]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 17
        Region 4: I/O ports at dc00 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

03:04.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
        Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller 
[1106:3038]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 18
        Region 4: I/O ports at d480 [size=32]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

03:04.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 
65) (prog-if 20 [EHCI])
        Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 32 bytes
        Interrupt: pin C routed to IRQ 19
        Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

03:06.0 Network controller [0280]: VIA Technologies, Inc. VIA VT6655 WiFi 
Adapter, 802.11a/b/g [1106:3253]
        Subsystem: VIA Technologies, Inc. Device [1106:6655]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
        Region 1: I/O ports at d000 [size=256]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ndiswrapper



-- System Information:
Debian Release: 5.0
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.28-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.28-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.28-1-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.28-1-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.28           <none>        (no description available)

-- debconf information:
  linux-image-2.6.28-1-686/postinst/old-system-map-link-2.6.28-1-686: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.28-1-686/postinst/bootloader-test-error-2.6.28-1-686:
  linux-image-2.6.28-1-686/prerm/would-invalidate-boot-loader-2.6.28-1-686: true
  linux-image-2.6.28-1-686/preinst/initrd-2.6.28-1-686:
  linux-image-2.6.28-1-686/preinst/abort-overwrite-2.6.28-1-686:
  linux-image-2.6.28-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.28-1-686/preinst/failed-to-move-modules-2.6.28-1-686:
  linux-image-2.6.28-1-686/preinst/lilo-initrd-2.6.28-1-686: true
  linux-image-2.6.28-1-686/postinst/create-kimage-link-2.6.28-1-686: true
  linux-image-2.6.28-1-686/preinst/elilo-initrd-2.6.28-1-686: true
  linux-image-2.6.28-1-686/preinst/abort-install-2.6.28-1-686:
  linux-image-2.6.28-1-686/postinst/depmod-error-initrd-2.6.28-1-686: false
  linux-image-2.6.28-1-686/postinst/old-dir-initrd-link-2.6.28-1-686: true
  linux-image-2.6.28-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.28-1-686/postinst/depmod-error-2.6.28-1-686: false
  linux-image-2.6.28-1-686/preinst/overwriting-modules-2.6.28-1-686: true
  linux-image-2.6.28-1-686/postinst/old-initrd-link-2.6.28-1-686: true
  linux-image-2.6.28-1-686/prerm/removing-running-kernel-2.6.28-1-686: true
  linux-image-2.6.28-1-686/preinst/bootloader-initrd-2.6.28-1-686: true
  linux-image-2.6.28-1-686/postinst/bootloader-error-2.6.28-1-686:



-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to