The 7800's address is 6Ah (the A is a cap). Also set the 7800 to 9600 and DX4WIN to 9600. Also try different speeds including auto. Good luck...
Art W6KY w6ky.com..................................................................................................... From: Jim Junkert <k0j...@gmail.com> To: dx4win@mailman.qth.net Sent: Saturday, June 17, 2017 11:32 AM Subject: [Dx4win] IC 7800 RIG CONTROL I'm unable to configure DX4WIN 8.05 radio control with an IC7800. At one point several computers ago and with an older version of DX4WIN it worked just fine. I got bored, so decided to re-configure it again with the new computer and 8.05. Hours and headaches later, rig control is still MIA. If you have it working with a 7800, I'd sure appreciate your settings and/or any help you can provide. Tnx! 73, Jim, KØJUH The Old Duck Hunter ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html