Hello, Jeff Kirsher: 在 Thursday 25 December 2008 17:59:40,Jeff Kirsher wrote: > On Wed, Dec 24, 2008 at 11:07 PM, 刘磊 <orphen.lei...@gmail.com> wrote: > > Hi, all: > > > > I have an intel 82571EB NIC, and it support 2Tx, 2Rx queues. > > I want to use the multi queue feature, but there is no > > CONFIG_NETDEVICES_MULTIQUEUE in the e1000e driver. > > > > Is the e1000e driver NOT need to set CONFIG_NETDEVICES_MULTIQUEUE ? > > Or the e1000e driver does NOT support multi queue feature yet? > > > > ------------------------------------------------------------------------- > >----- > > While the hardware supports 2 Tx and 2 Rx queues we do not have the > full implementation in our Linux e1000e driver to support this. > The performance to be gained from multiple queues is very small, and > was not a requirement for our Linux software. > So its not supported right now, and I doubt it will be implemented for > e1000e as there is likely to be very little benefit. > Although we may reconsider based on customer feedback.
Thank you for your reply. Do you know which Intel NIC chip can handle 1Gbps with 64 bytes? ------------------------------------------------------------------------------ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel