RE: [ECOS] How to enable USB on IXP425 GRG

[Navya S Kamath]

Hi,

I created a driver package for USB on IXP425. I have modified the ecos.db to
include the USB package. Similarly I have edited the .ecm files for the
board. But while compiling the image the driver source is not compiled.Is
there any other change to be made?

Please help 

Regards,
Navya

-----Original Message-----
From: [EMAIL PROTECTED]
[EMAIL PROTECTED] On Behalf Of Andrew Lunn
Sent: Saturday, November 17, 2007 11:16 PM
To: Navya S Kamath
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] How to enable USB on IXP425 GRG

On Sat, Nov 17, 2007 at 02:19:02PM +0530, Navya S Kamath wrote:
> Hi Andrew,
> 
> The USB 1.1 interface on ADI board is built around the on-chip USB
> controller and can work only as the USB peripheral at 12 Mbps data rate.
> 
> Is the driver already available for the in build USB of IXP425?

Not that i know of which is why i said you need to write a driver.

    Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss