Re: [ECOS] TWI/I?C driver for AT91

[Andrew Lunn]

> Thanks for the heads up. I had noticed there are no DMA channels to
> the TWI controller, but didn't think it would be much of an issue.
> I'll give it a try and see where it takes me. I need I2C anyway, so
> using the eCos framework makes some sense.

If hardware I2c causes you problems you could always do bit banging
using the same pins, but as GPIO lines. There is a bit banging
framework in eCos.

      Andrew


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss