Terje,
Setting the RTC from KX3 Utility already is present. It sets the clock
from the computer clock time.
Reading the clock is a different matter. If you have a computer
connected, why not just allow the logger to use the clock in the computer?
73,
Don W3FPR
On 5/23/2017 7:21 AM, Terje Elde wrote:
Hi,
I’m wondering if it’s possible to get programmable access to reading and/or
setting the KXBC3 internal RTC (real time clock), through the serial interface?
If not, that would probably make for a nice feature request?
I checked the programmers manual and the KXBC3 manual, but I must have missed
it if any such feature is mentioned there.
Examples of where this would be useful include being able to set the clock
whenever the KX3 is connected to a computer with a good GPS or NTP synchronised
clock, to avoid any drift or similar issues.
For reading, it would be a nice capability to logging dongles or similar
projects, allowing to grab almost all of information of a QSO, for easier
logging later. It’s already easy to grab the frequency etc, but putting that
information on a timeline would be even better.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
