Re: [Em28xx] Support for KWORLD PVRTV 300U

[Markus Rechberger]

did you try to remove the media directory within the /lib/modules tree?
maybe you have support for gzipped modules and the installation didn't
update these drivers.
gzipped modules would look like em28xx.ko.gz, make install only
creates unpacked modules eg. em28xx.ko and it wouldn't overwrite the
old module, and having both modules in the media directory is bad.
try to remove any media directory within the /lib/modules tree.

cheers,
Markus

On 6/2/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> Yes, of course I did:
>
> hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental
> cd v4l-dvb-experimental/
> make
> make install
>
> I placed the firmware of firmware2.tgz in /lib/firmware and also in
> /lib/firmware/2.6.21-gentoo (just in case). Then I rebooted and the
> modules get loaded:
>
> lsmod | grep em28
> videodev               28544  1 em28xx
> v4l2_common            18560  2 em28xx,videodev
> tveeprom               17424  1 em28xx
> compat_ioctl32          5120  1 em28xx
> ir_common              37380  1 em28xx
> v4l1_compat            15748  2 em28xx,videodev
> i2c_core               19840  3 em28xx,tveeprom,i2c_i801
>
> My lsusb is showing the following:
>
> Bus 003 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 005 Device 001: ID 0000:0000
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 005: ID eb1a:e300 eMPIA Technology, Inc.
> Bus 001 Device 001: ID 0000:0000
>
> Any idea?
>
> Regards,
>
> Pedro
>
> > On 6/2/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> >> Hi Markus,
> >>
> >> I had a closer look to your driver and I saw that in em28xx-cards you
> >> specified my card:
> >>
> >> { USB_DEVICE(0xeb1a, 0xe300), .driver_info =
> >> EM2861_BOARD_KWORLD_PVRTV_300U
> >> }
> >>
> >> But once I installed it and rebooted my system, when I load the kernel
> >> module (modprobe em28xx device_mode=1) I just get this in the dmesg:
> >>
> >> Linux video capture interface: v2.00
> >> em28xx v4l2 driver version 0.0.1 loaded
> >> usbcore: registered new interface driver em28xx
> >>
> >> I'm pretty sure it has something to do with the firmware because it
> >> seems
> >> it not loading. I could I verify this?
> >>
> >
> > did you follow the installation instruction?
> > To me it seems like you haven't installed the drivers...
> > what does lsusb show up?
> >
> >
> > Markus
> >
> >> do you have any suggestion?
> >>
> >> Regards,
> >>
> >> Pedro
> >>
> >>
> >
> >
> > --
> > Markus Rechberger
> >
> >
>
>
>


-- 
Markus Rechberger

_______________________________________________
Em28xx mailing list
Em28xx@mcentral.de
http://mcentral.de/mailman/listinfo/em28xx