Re: [Em28xx] Support for KWORLD PVRTV 300U

[amatt3]

I am using firmware_v4 for the KWORLD PVRTV 300U device.
John Adams

On Saturday 02 June 2007, Markus Rechberger wrote:
> did you try to remove the media directory within the /lib/modules tree?
> maybe you have support for gzipped modules and the installation didn't
> update these drivers.
> gzipped modules would look like em28xx.ko.gz, make install only
> creates unpacked modules eg. em28xx.ko and it wouldn't overwrite the
> old module, and having both modules in the media directory is bad.
> try to remove any media directory within the /lib/modules tree.
>
> cheers,
> Markus
>
> On 6/2/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > Yes, of course I did:
> >
> > hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental
> > cd v4l-dvb-experimental/
> > make
> > make install
> >
> > I placed the firmware of firmware2.tgz in /lib/firmware and also in
> > /lib/firmware/2.6.21-gentoo (just in case). Then I rebooted and the
> > modules get loaded:
> >
> > lsmod | grep em28
> > videodev               28544  1 em28xx
> > v4l2_common            18560  2 em28xx,videodev
> > tveeprom               17424  1 em28xx
> > compat_ioctl32          5120  1 em28xx
> > ir_common              37380  1 em28xx
> > v4l1_compat            15748  2 em28xx,videodev
> > i2c_core               19840  3 em28xx,tveeprom,i2c_i801
> >
> > My lsusb is showing the following:
> >
> > Bus 003 Device 001: ID 0000:0000
> > Bus 004 Device 001: ID 0000:0000
> > Bus 005 Device 001: ID 0000:0000
> > Bus 002 Device 001: ID 0000:0000
> > Bus 001 Device 005: ID eb1a:e300 eMPIA Technology, Inc.
> > Bus 001 Device 001: ID 0000:0000
> >
> > Any idea?
> >
> > Regards,
> >
> > Pedro
> >
> > > On 6/2/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > >> Hi Markus,
> > >>
> > >> I had a closer look to your driver and I saw that in em28xx-cards you
> > >> specified my card:
> > >>
> > >> { USB_DEVICE(0xeb1a, 0xe300), .driver_info =
> > >> EM2861_BOARD_KWORLD_PVRTV_300U
> > >> }
> > >>
> > >> But once I installed it and rebooted my system, when I load the kernel
> > >> module (modprobe em28xx device_mode=1) I just get this in the dmesg:
> > >>
> > >> Linux video capture interface: v2.00
> > >> em28xx v4l2 driver version 0.0.1 loaded
> > >> usbcore: registered new interface driver em28xx
> > >>
> > >> I'm pretty sure it has something to do with the firmware because it
> > >> seems
> > >> it not loading. I could I verify this?
> > >
> > > did you follow the installation instruction?
> > > To me it seems like you haven't installed the drivers...
> > > what does lsusb show up?
> > >
> > >
> > > Markus
> > >
> > >> do you have any suggestion?
> > >>
> > >> Regards,
> > >>
> > >> Pedro
> > >
> > > --
> > > Markus Rechberger



_______________________________________________
Em28xx mailing list
Em28xx@mcentral.de
http://mcentral.de/mailman/listinfo/em28xx