Hi list and niall 

Special thanks for you Niall again.

Here is one of my last question about flex and then it will be ok. 
I would like to backup only certains files but not all the directory
Is it possible ??
I think not but maybe.
Thanks for reply 

-----Message d'origine-----
De : Niall Brosnan [mailto:[EMAIL PROTECTED] 
Envoyé : mercredi 8 juin 2005 10:51
À : CHEVALIER, Erwan -Syntegra FR
Cc : flexbackup-help@lists.sourceforge.net
Objet : RE: [flexbackup-help] blksize parameters

CHEVALIER, Erwan wrote:
> It's ok.
> Success.
> Yes, Thanks for all Niall
> So now parameters working.
> In order to all understand, what is the difference between nst0 and st0.
> Someone had explain to me:
> St0: When you backup the device rewind then after each record.
> Not on st0.
> If it's true how it can block a test??
> This is the last question for you Master .
> Bye and thanks again. 

Hi Erwan,
great!

The non-rewinding device (nst0) allows multiple archives on one tape.
During the test, flexbackup writes several files to tape.
Then it compares them back against where they should be on tape:
e.g. It counts 2 records forward and then compares the third file.

The difference comes when you write multiple files:

NST0 += FILE 1 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
NST0 += FILE 1 -= | = FILE 2 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
NST0 += FILE 1 -= | = FILE 2 -= | = FILE 3 -=-=-=-=-=-=-=-=-=-=-=+ NST0 +=
FILE 1 -= | = FILE 2 -= | = FILE 3 -= | = FILE 4 -=-=-=-=+

ST0  += FILE 1  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
ST0  += FILE 2  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
ST0  += FILE 3  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+
ST0  += FILE 4  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+

Now when you compare FILE 1 on disk to FILE 1 on tape, it is succesful for
/dev/nst0, but fails for /dev/st0 as FILE 1 != FILE 4

flexbackup should really trap that particular error, and suggest that you use
the non-rewinding device.
It is however, clearly marked in the config.

Good luck with your restore,
Niall

 
> -----Message d'origine-----
> De : Niall Brosnan [mailto:[EMAIL PROTECTED] Envoyé : mardi 7 
> juin 2005 19:28 À : CHEVALIER, Erwan -Syntegra FR Cc : 
> flexbackup-help@lists.sourceforge.net
> Objet : RE: [flexbackup-help] blksize parameters
> 
> Hi Erwan,
> thanks for your perseverance.
> 
> Your config file is still set to
> $device = '/dev/st0'  ; though,
> 
> It really HAS to be the non rewinding device, /dev/nst0
> 
> On my system, this error gives the same error that you are seeing.
> 
> Niall
> 




********************************************************************

This email may contain information which is privileged or confidential. If you 
are not the intended recipient of this email, please notify the sender 
immediately and delete it without reading, copying, storing, forwarding or 
disclosing its contents to any other person
Thank you

Check us out at http://www.bt.com/consulting

********************************************************************



-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games.  How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r 
_______________________________________________
flexbackup-help mailing list
flexbackup-help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flexbackup-help

Reply via email to