Re: [Flexradio] Setup 4 Ham Radio Deluxe

[José Dumoulin]

Leo, you did not say whether you have installed VAC.

José F5JD

David Beumer W0DHB a écrit :

Leo

Because HRD has some latency when keying with CAT you may want to set up an extra COM port and use the use the "via serial port" option of the "PTT" setup in DM780 and enable PTT control on the "CAT control" tab of PoweSDR.

Also, make sure you're CAT setup is correct in HRD as Tim had suggested"

Dave W0DHB


Leo Hoffmann wrote:

Using Flex 5000a (vista 64)and com0com( 4-14).

Trying to get it to transmit on PSK. Receive. logging. and all extras

working fine but not transmitting. If I put it into tune mode it shows it is

transmitting take it out and go into macro ..nothing happens.......could
someone tell me what settings they are using for the flex and Ham Radio
Deluxe.........Thanks. Leo wb0yol

_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/

Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/

Message delivered to d...@w0dhb.net

_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/

Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/

Message delivered to f...@sfr.fr

_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/
Message delivered to arch...@mail-archive.com