[Flexradio] PSDR/Flex 3K/EasyPAL

[Gary]

Have been working thru some quirks with integration with EasyPAL for 
SSTV.  Thought I'd share these observations as others may have had 
similar quirks.

It seem EasyPAL's latest version (Ver 5/beta) doesn't do well with CAT 
to the PSDR/F3K but using a virtual COM port for PTT is okay.

If I have had my PSDR up and integrated with HRD, and then shut down HRD 
and bring up EasyPAL, there are a lot of drops on the VAC.  Solution 
seems to be to stop all apps (PSDR and EasyPAL) and then restart in the 
sequence of PSDR first (start the radio) and then bring up EasyPAL.  If 
that doesn't work (about 1% of the time) then a complete reboot and the 
above startup sequence will.

Occasionally, when going to transmit, the F3K goes into xmitt mode, but 
no RF is output.  Solution is to abort, from EasyPAL, and then go back 
into xmitt.  Not sure if this is a PSDR or EasyPAL fault.

73,

Gary W5GW

_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/