RE: [Flightgear-users] F-80C model

[Larry Sherertz]

Dave, 

I tried to fly the F-80C, but it errors out.

I am using Flightgear 9.9 on a Dell Laptop.  I am using a version from the
website, and do no compiling on my own.

I get the error:
OpenAL error (AL-INVALID-VALUE): constructor (alBufferData)
Fatal error: Failed to buffer data.

Is there anything I can do, I have loved this plan since I was a boy (now
57).

I have really enjoyed the Flightgear Program, I have a Private Pilot Lic,
but have not flown in a long time. 

Thanks for all your work, and the work done by many other people.


Thanks,
 
 
Larry
 
 -----Original Message-----
From: Dave Culp [EMAIL PROTECTED] 
Sent: Monday, December 19, 2005 11:20 PM
To: FlightGear user discussions
Subject: [Flightgear-users] F-80C model

I've just completed a Lockheed F-80C Shooting Star.  I'd like someone to 
please download it and take it up for a spin before I submit it to the 
hangar.

      http://home.comcast.net/~davidculp2/F80C.tar.gz

      screenshot:
      http://home.comcast.net/~davidculp2/P80C-001.jpg

The exterior model was originally done by Massimo Taccoli, who has done 
several very nice models for MSFS, and has given me permission to convert it

for use in FlightGear and release the resulting model under GPL.  The FDM is

JSBSim, based on Aero-Matic output with a couple tweaks.  It runs here in
CVS 
FlightGear, and should run in 0.9.8 and later?

It's a no-brainer to fly.  Engine is running at startup, and flaps are set
at 
half (takeoff position).  Check out the gunsight (you have to turn it on by 
clicking on the on/off switch).  It has auto-depression for g-load.

Thanks,

Dave




_______________________________________________
Flightgear-users mailing list
Flightgear-users@flightgear.org
http://mail.flightgear.org/mailman/listinfo/flightgear-users
2f585eeea02e2c79d7b1d8c4963bae2d