Rainer Schroeter
Tue, 13 Feb 2001 02:27:15 -0800
"Paul Raymond" <[EMAIL PROTECTED]> wrote: > You should treat the keel stripping as sacrificial. Do not use pvc cement. > This will permanently bond the pvc, and you will never get it off without > serious damage to the original hull material. I suspect the same for two I have no experience with two part cement. The pvc-glue I use is a one part cement, that holds on very well (ripping of a glued piece of pvc will damage the surfaces badly). But: It is not heat resistant. While heating the glued pvc to about 100 to 150 dgr. Celsius with an hot-air-gun the patches (or keelstripes) will come off easily. > I haven't tried gluing pvc with rubber cement, so try > it first. Sorry, but this will not work for pvc well (although it sticks together to some extend). -- Rainer Schroeter, Marburg (Lahn), Germany ######################################################### Foldingboats Mailing List - All postings copyright the author and not to be reproduced outside Foldingboats or Foldingboats archives without author's permission Submissions: [EMAIL PROTECTED] Subscriptions: [EMAIL PROTECTED] #########################################################