Re: error when using an edge

[Edzer J. Pebesma]

Marco,

this was indeed due to a bug in the gstat code, I think I found it.
I will upload new sources the end of next week; if you want to
proceed now, below you'll find the diff -c output. The example
you sent me looks nice!
Thanks for notifying me.

Best regards,
--
Edzer
Marco Hugentobler wrote:

I try to interpolate scattered points with a breakline. When i run gstat,
i always get errors. When i take out the 'edges:...' command, everything
works fine, otherwise, i get the errors.
My command file  looks like this:
 

...

~/gstat/src$ diff -c gls.c /tmp/gstat-2.4.3/src/gls.c
*** gls.c       Fri Sep 26 21:14:53 2003
--- /tmp/gstat-2.4.3/src/gls.c  Mon Jun 23 20:30:23 2003
***************
*** 223,231 ****
       }
       for (i = 0, global = 1; i < n_vars && global; i++)
!               global = (d[i]->sel == d[i]->list
!                               && d[i]->n_list == d[i]->n_original
!                               && d[i]->n_list == d[i]->n_sel);
 /*
  * global things: enter whenever (a) first time, (b) local selections or
--- 223,229 ----
       }
       for (i = 0, global = 1; i < n_vars && global; i++)
!               global = (d[i]->sel == d[i]->list && d[i]->n_list == 
d[i]->n_original);

 /*
  * global things: enter whenever (a) first time, (b) local selections or