On Wed, Mar 22, 2017 at 02:29:39PM +0200, Horia Geantă wrote:
> LS1012A has a SEC v5.4 security engine.
>
> Signed-off-by: Horia Geantă <horia.gea...@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 9 +++
> arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 9 +++
> arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 9 +++
> arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 91
> +++++++++++++++++++++-
> 4 files changed, 117 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
> index a619f6496a4c..bab9e68947e4 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
> @@ -49,6 +49,15 @@
> model = "LS1012A Freedom Board";
> compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
>
> + aliases {
> + crypto = &crypto;
> + rtic_a = &rtic_a;
> + rtic_b = &rtic_b;
> + rtic_c = &rtic_c;
> + rtic_d = &rtic_d;
> + sec_mon = &sec_mon;
> + };
> +
> sys_mclk: clock-mclk {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
> index 14a67f1709e7..5c4e84c7f20d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
> @@ -49,6 +49,15 @@
> model = "LS1012A QDS Board";
> compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
>
> + aliases {
> + crypto = &crypto;
> + rtic_a = &rtic_a;
> + rtic_b = &rtic_b;
> + rtic_c = &rtic_c;
> + rtic_d = &rtic_d;
> + sec_mon = &sec_mon;
> + };
> +
> sys_mclk: clock-mclk {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
> index 62c5c7123a15..ff9dd16aa65a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
> @@ -48,6 +48,15 @@
> / {
> model = "LS1012A RDB Board";
> compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
> +
> + aliases {
> + crypto = &crypto;
> + rtic_a = &rtic_a;
> + rtic_b = &rtic_b;
> + rtic_c = &rtic_c;
> + rtic_d = &rtic_d;
> + sec_mon = &sec_mon;
> + };
What are these aliases used for? Are they board specific? If not, we
should probably have them in fsl-ls1012a.dtsi, since you are adding
them for all three fsl-ls1012a based boards.
> };
>
> &duart0 {
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> index cffebb4b3df1..68f3012ae07e 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> @@ -42,7 +42,7 @@
> * OTHER DEALINGS IN THE SOFTWARE.
> */
>
> -#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> / {
> compatible = "fsl,ls1012a";
> @@ -113,6 +113,95 @@
> big-endian;
> };
>
> + crypto: crypto@1700000 {
> + compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
> + "fsl,sec-v4.0";
> + fsl,sec-era = <8>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x00 0x1700000 0x100000>;
> + reg = <0x00 0x1700000 0x0 0x100000>;
> + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> +
> + sec_jr0: jr@10000 {
> + compatible = "fsl,sec-v5.4-job-ring",
> + "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x10000 0x10000>;
> + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr1: jr@20000 {
> + compatible = "fsl,sec-v5.4-job-ring",
> + "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x20000 0x10000>;
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr2: jr@30000 {
> + compatible = "fsl,sec-v5.4-job-ring",
> + "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x30000 0x10000>;
> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr3: jr@40000 {
> + compatible = "fsl,sec-v5.4-job-ring",
> + "fsl,sec-v5.0-job-ring",
> + "fsl,sec-v4.0-job-ring";
> + reg = <0x40000 0x10000>;
> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + rtic@60000 {
> + compatible = "fsl,sec-v5.4-rtic",
> + "fsl,sec-v5.0-rtic",
> + "fsl,sec-v4.0-rtic";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x60000 0x100 0x60e00 0x18>;
> + ranges = <0x0 0x60100 0x500>;
> +
> + rtic_a: rtic-a@0 {
> + compatible = "fsl,sec-v5.4-rtic-memory",
> + "fsl,sec-v5.0-rtic-memory",
> + "fsl,sec-v4.0-rtic-memory";
> + reg = <0x00 0x20 0x100 0x100>;
> + };
> +
> + rtic_b: rtic-b@20 {
> + compatible = "fsl,sec-v5.4-rtic-memory",
> + "fsl,sec-v5.0-rtic-memory",
> + "fsl,sec-v4.0-rtic-memory";
> + reg = <0x20 0x20 0x200 0x100>;
> + };
> +
> + rtic_c: rtic-c@40 {
> + compatible = "fsl,sec-v5.4-rtic-memory",
> + "fsl,sec-v5.0-rtic-memory",
> + "fsl,sec-v4.0-rtic-memory";
> + reg = <0x40 0x20 0x300 0x100>;
> + };
> +
> + rtic_d: rtic-d@60 {
> + compatible = "fsl,sec-v5.4-rtic-memory",
> + "fsl,sec-v5.0-rtic-memory",
> + "fsl,sec-v4.0-rtic-memory";
> + reg = <0x60 0x20 0x400 0x100>;
> + };
> + };
> + };
> +
> + sec_mon: sec_mon@1e90000 {
Hyphen is more preferred to be used in node name than underscore.
Shawn
> + compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
> + "fsl,sec-v4.0-mon";
> + reg = <0x0 0x1e90000 0x0 0x10000>;
> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> dcfg: dcfg@1ee0000 {
> compatible = "fsl,ls1012a-dcfg",
> "syscon";
> --
> 2.12.0.264.gd6db3f216544
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
