Dear Linux DVB developers, Last week I've purchased a KNC One TV-Station DVB-C Plus, including a CineView and Alphacrypt CAM module. Unfortunately, I haven't been able to get the decryption working. I've searched this list (and Google) for solutions, have found similar reports, however none of the proposed fixes helped.
I have tried combinations of the following: * (debian-) kernels 2.6.22-2, and 2.6.23-1 (latest) * different PCI slots (to change the assigned IRQ) * refitting the cable The following was successful: * Tuning to channels using czap The following doesn't work: * Enabling the CAM The system keeps looping over inserted/ejected messages if the CAM is inserted: Nov 3 16:06:04 fraggle kernel: ACPI: PCI interrupt for device 0000:00:08.0 disabled Nov 3 16:13:56 fraggle kernel: Linux video capture interface: v2.00 Nov 3 16:13:56 fraggle kernel: saa7146: register extension 'budget_av'. Nov 3 16:13:56 fraggle kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 Nov 3 16:13:56 fraggle kernel: saa7146: found saa7146 @ mem ffffc200001fce00 (revision 1, irq 19) (0x1894,0x0023). Nov 3 16:13:56 fraggle kernel: saa7146 (0): dma buffer size 192512 Nov 3 16:13:56 fraggle kernel: DVB: registering new adapter (KNC1 DVB-C Plus MK3) Nov 3 16:13:56 fraggle kernel: adapter failed MAC signature check Nov 3 16:13:56 fraggle kernel: encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff Nov 3 16:13:56 fraggle kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] Nov 3 16:13:56 fraggle kernel: KNC1-0: MAC addr = 00:09:d6:6d:88:7b Nov 3 16:13:56 fraggle kernel: DVB: registering frontend 0 (Philips TDA10023 DVB-C)... Nov 3 16:13:56 fraggle kernel: budget-av: ci interface initialised. Nov 3 16:13:56 fraggle kernel: budget-av: cam inserted A Nov 3 16:13:56 fraggle kernel: budget-av: cam ejected 5 Nov 3 16:14:00 fraggle kernel: budget-av: cam inserted A Nov 3 16:14:00 fraggle kernel: budget-av: cam ejected 5 ... Nov 3 16:14:04 fraggle kernel: budget-av: cam inserted A Nov 3 16:14:05 fraggle kernel: budget-av: cam ejected 5 , and this inserted/ejected loop keeps repeating. The messages stop when the CAM is removed from the CI module. The system runs in 64 bit mode on an AMD64. Given this, * Is it more likely to be a driver problem, or a hardware problem? If it is a driver problem, in which source file should I start looking? * What cross-checks could I do next to determine the exact problem? Thanks in advance, kind regards, Rutger ter Borg _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
