On Sun, Mar 16, 2008 at 1:04 PM, Michael Krufky <[EMAIL PROTECTED]> wrote: > > Jarryd Beck wrote: > > On Sun, Mar 16, 2008 at 11:47 AM, Michael Krufky <[EMAIL PROTECTED]> wrote: > >> Antti Palosaari wrote: > >> > I have no idea how to debug more. Without device it is rather hard to > >> > test many things. It will help a little if we know is tuner locked. > >> > Mike, is it easy to add debug writing for tuner to indicate if tuner > >> > is locked or not locked? I have used that method earlier with mt2060 > >> > tuner... > >> > >> There is a lock bit in register 0x01[6] but I have not found it to be > >> reliable, especially not on the c1 part. > >> > >> -Mike > >> > >> > >> > > > > You won't believe this, but it worked. I think every time I tried both > > patches together I left .no_reconnect in. I tried it again with both > > patches applied, no other modifications, and it worked. > > > > Thanks for all your help, > > Jarryd. > > This is great news! For an experiment, can you try once more without my > patch applied? > > This will just confirm whether or not we can write all 39 registers at once. > > If the patch that I gave you is truly needed, then I will integrate it into > the official driver. > > Regards, > > Mike >
Takes half a minute to load when plugging in, keyboard is slow to respond when tuning, and I get lots of this: af9013_i2c_gate_ctrl: enable:0 af9013_i2c_gate_ctrl: enable:1 Applied the patch again and it was all fine. Jarryd. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
