On Wed, 10 Oct 2007 10:28:45 +0200 (CEST) [EMAIL PROTECTED] wrote: > I get this on brand new hardware, 2xHitachi Deathstar 320gb SATA2 > (sata_via driver) > > I get this a lot, the disk makes some sound after heavy IO and then the > system hangs for a few seconds, then this comes up: > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > ata1.00: cmd 25/00:00:3f:76:30/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > ata1: port is slow to respond, please be patient (Status 0xd0) > ata1: soft resetting port > ata1.00: configured for UDMA/133 > ata1: EH complete > sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > raid1: Disk failure on sdb1, disabling device. > > This is on kernel 2.6.23 >
(added linux-ide) - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
