On Mon, Apr 10, 2017 at 05:19:55PM +0200, olivier moysan wrote:
> This patch adds documentation of device tree bindings for the
> STM32 SAI ASoC driver.
> 
> Signed-off-by: olivier moysan <olivier.moy...@st.com>
> ---
>  .../devicetree/bindings/sound/st,stm32-sai.txt     | 89 
> ++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt 
> b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> new file mode 100644
> index 0000000..c59a3d7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> @@ -0,0 +1,89 @@
> +STMicroelectronics STM32 Serial Audio Interface (SAI).

[...]

> +     sai1b: audio-controller@40015824 {
> +             #sound-dai-cells = <0>;
> +             compatible = "st,stm32-sai-sub-b";
> +             reg = <0x40015824 0x1C>;
> +             clocks = <&rcc 1 CLK_SAI2>;
> +             clock-names = "sai_ck";
> +             dmas = <&dma2 5 0 0x400 0x0>;
> +             dma-names = "tx";
> +             pinctrl-names = "default";
> +             pinctrl-0 = <&pinctrl_sai1b>;
> +
> +             ports {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     sai1b_port: port@0 {
> +                             reg = <0>;
> +                             cpu_endpoint: endpoint {
> +                                     remote-endpoint = <&codec_endpoint>;
> +                                     audio-graph-card,format = "i2s";
> +                                     audio-graph-card,bitclock-master = 
> <&codec_endpoint>;
> +                                     audio-graph-card,frame-master = 
> <&codec_endpoint>;

These property names are wrong.

> +                             };
> +                     };
> +             };
> +     };
> +};
> +
> +audio-codec {
> +     codec_port: port {
> +             codec_endpoint: endpoint {
> +                     remote-endpoint = <&cpu_endpoint>;
> +             };
> +     };
> +};
> -- 
> 1.9.1
> 

Reply via email to