v5:
        Incorporate feedback from Mark Brown and Geert Uytterhoeven

        spi: qup: Enable chip select support
                Update commit log. Include the commit's description

        Removed "spi: qup: Add completion structures for DMA". This
        introduced separate completion structures for DMA based rx/tx
        and FIFO based i/os. This was not needed.

        Added "spi: qup: Fix QUP version identify method" to identify
        qup version using of_device_get_match_data instead of
        of_device_is_compatible.

v4:
        Discard patch #15, 'spi: qup: support for qup v1 dma'.
        This depends on ADM driver, which is not upstreamed yet.

v3:
        Fix git bisect-ability issues in
                spi: qup: Add completion structures for DMA
                spi: qup: Add completion timeout
                spi: qup: Place the QUP in run mode before DMA
                spi: qup: Fix transaction done signaling

v2:
        Incorporate feedback from Andy Gross, Sricharan, Stanimir Varbanov

        Modified the QUP-v1 dma completion sequence to QUP-v2 as per feedback.

        Removed code that used controller->xfer to identify extra interrupts,
        since with the fixes done to handle i/o completion we don't see
        extra interrupts.

v1:
        This series fixes some existing issues in the code for both
        interrupt and dma mode. Patches 1 - 11 are the fixes.
        Random failures/timeout are observed without these fixes.
        Also, the current driver does not support block transfers > 64K
        and the driver quietly fails. Patches 12 - 18 add support for this
        in both interrupt and dma mode.

        The entire series has been tested on ipq4019 with
        SPI-NOR flash for block sizes > 64k.

Varadarajan Narayanan (14):
  spi: qup: Enable chip select support
  spi: qup: Setup DMA mode correctly
  spi: qup: Add completion timeout
  spi: qup: Place the QUP in run mode before DMA
  spi: qup: Fix error handling in spi_qup_prep_sg
  spi: qup: Fix transaction done signaling
  spi: qup: Do block sized read/write in block mode
  spi: qup: refactor spi_qup_io_config into two functions
  spi: qup: call io_config in mode specific function
  spi: qup: allow block mode to generate multiple transactions
  spi: qup: refactor spi_qup_prep_sg
  spi: qup: allow multiple DMA transactions per spi xfer
  spi: qup: Ensure done detection
  spi: qup: Fix QUP version identify method

 drivers/spi/spi-qup.c | 566 ++++++++++++++++++++++++++++++++++----------------
 1 file changed, 392 insertions(+), 174 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of 
Code Aurora Forum, hosted by The Linux Foundation

Reply via email to