Hi Marek, On 08/21/2017 03:21 PM, Marek Szyprowski wrote: > Hi Stanimir, > > On 2017-08-21 13:34, Stanimir Varbanov wrote: >> This change is intended to give to the v4l2 drivers a choice to >> change the default behavior of the v4l2-core DMA mapping direction >> from DMA_TO/FROM_DEVICE (depending on the buffer type CAPTURE or >> OUTPUT) to DMA_BIDIRECTIONAL during queue_init time. >> >> Initially the issue with DMA mapping direction has been found in >> Venus encoder driver where the hardware (firmware side) adds few >> lines padding on bottom of the image buffer, and the consequence >> is triggering of IOMMU protection faults. >> >> This will help supporting venus encoder (and probably other drivers >> in the future) which wants to map output type of buffers as >> read/write. >> >> Signed-off-by: Stanimir Varbanov <stanimir.varba...@linaro.org> > > Thanks for the patch. > > Acked-by: Marek Szyprowski <m.szyprow...@samsung.com>
Thanks! > > While touching this, I would love to unify set_page_dirty_lock() > related code in videobuf2-dc, videobuf2-sg and videobuf2-vmalloc. > > IMHO the pattern used in videobuf2-vmalloc should be copied to > videobuf2-sg (currently checks for dma_dir for every single page) > and videobuf2-dc (currently it lacks any checks and calls > set_page_dirty_lock() unconditionally). If you have a little bit > of spare time, please prepare a separate patch for the above > mentioned fix. Sure, I'll unify set_page_dirty_lock invocations in separate patch. -- regards, Stan
