On 12/02/2015 01:38 AM, Tony Lindgren wrote:
> Hi all,
>
> Here are some fixes for v4.5 merge window to get dm814x-evm booting.
> While hp t410 boots based on the bootloader clocks, dm814x-evm needs
> more things configured. Especially the clock dts entries were all
> wrong and just happened to be harmless on hp t410.
>
> To boot, you probably want to use v4.4-rc3 because of commit 29f5b34ca1a1
> ("arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data") and also
> manually apply commit 0db19b850468 ("net: cpsw: Fix ethernet regression
> for dm814x") from Linux next.
>
> I have more changes coming up after this series after I clean them
> up a bit. Here's a brief status update for people:
>
> What's working after this series on dm814x-evm and hp t410:
>
> - Timers
>
> - Serial
>
> - Ethernet
>
> - DMA
>
> - I2C (only tested so far with i2cdetect -r 0)
>
> - GPIO (only tested with additional MMC patches for card detect)
>
> I have the following additional patches coming soonish:
>
> - Basic ADPLL clock driver
>
> - MMC support
>
> - USB support
>
> - Minimal j5eco-evm support
>
> Should work with just configuration:
>
> - [PATCH 0/3] pwm: omap: Add PWM support using dual-mode timers
>
> I'm not working on any of the accelerators or graphics FYI. If somebody
> has patches coming for those please notify on the linux-omap and
> linux-arm-kernel mailings lists so we can avoid duplicate work.
>
> Tony Lindgren (10):
> ARM: OMAP2+: Fix timer entries for dm814x
> clk: ti: Add few dm814x clock aliases
> ARM: OMAP2+: Add DPPLS clock manager for dm814x
> ARM: OMAP2+: Enable GPIO for dm814x
> ARM: OMAP2+: Disable GPIO softreset for dm81xx
> ARM: OMAP2+: Remove useless check for legacy booting for dm814x
> ARM: dts: Fix dm814x entries for pllss and prcm
> ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
> ARM: dts: Fix dm8148 control modules ranges
> ARM: dts: Fix dm814x pinctrl address and mask
I'm worry a bit, if you will apply this series in its current order
- it will break git bisect.
Patch one "ARM: OMAP2+: Fix timer entries for dm814x" will use timerX_fck, but
those
clocks will be added by patches 2 "clk: ti: Add few dm814x clock aliases"
and 8 "ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting"
--
regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
