The power function uses a consumer regulator access to update the WiFi
enable GPIO value.
Signed-off-by: Uri Mashiach <uri.mashi...@compulab.co.il>
---
v1 -> v2: oops fix was removed to a separate fix.
v2 -> v3: no changes
drivers/net/wireless/ti/wlcore/spi.c | 37 ++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/net/wireless/ti/wlcore/spi.c
b/drivers/net/wireless/ti/wlcore/spi.c
index 44f059f..d3a4bcb 100644
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -30,6 +30,7 @@
#include <linux/spi/spi.h>
#include <linux/wl12xx.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include "wlcore.h"
#include "wl12xx_80211.h"
@@ -81,6 +82,7 @@
struct wl12xx_spi_glue {
struct device *dev;
struct platform_device *core;
+ struct regulator *reg; /* Power regulator */
};
static void wl12xx_spi_reset(struct device *child)
@@ -318,11 +320,40 @@ static int __must_check wl12xx_spi_raw_write(struct
device *child, int addr,
return 0;
}
+/**
+ * wl12xx_spi_set_power - power on/off the wl12xx unit
+ * @child: wl12xx device handle.
+ * @enable: true/false to power on/off the unit.
+ *
+ * use the WiFi enable regulator to enable/disable the WiFi unit.
+ */
+static int wl12xx_spi_set_power(struct device *child, bool enable)
+{
+ int ret = 0;
+ struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
+
+ WARN_ON(!glue->reg);
+
+ /* Update regulator state */
+ if (enable) {
+ ret = regulator_enable(glue->reg);
+ if (ret)
+ dev_err(child, "Power enable failure\n");
+ } else {
+ ret = regulator_disable(glue->reg);
+ if (ret)
+ dev_err(child, "Power disable failure\n");
+ }
+
+ return ret;
+}
+
static struct wl1271_if_operations spi_ops = {
.read = wl12xx_spi_raw_read,
.write = wl12xx_spi_raw_write,
.reset = wl12xx_spi_reset,
.init = wl12xx_spi_init,
+ .power = wl12xx_spi_set_power,
.set_block_size = NULL,
};
@@ -353,6 +384,12 @@ static int wl1271_probe(struct spi_device *spi)
* comes from the board-peripherals file */
spi->bits_per_word = 32;
+ glue->reg = devm_regulator_get(&spi->dev, "vwlan");
+ if (IS_ERR(glue->reg)) {
+ dev_err(glue->dev, "can't get regulator\n");
+ return PTR_ERR(glue->reg);
+ }
+
ret = spi_setup(spi);
if (ret < 0) {
dev_err(glue->dev, "spi_setup failed\n");
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
