From: Jens Künzer <jens.kuen...@fpga.homeip.net>
As the PCI irq pin of the ti1130 pcmcia bridge is not connected (at
least on some old IBM Thinkpad 760ED notebooks), the Cardbus IRQ has
to be routed to an ISA irq.
[li...@dominikbrodowski.net: split up the original patch, commit message,
cleanup]
Signed-off-by: Jens Kuenzer <jens.kuen...@fpga.homeip.net>
Signed-off-by: Dominik Brodowski <li...@dominikbrodowski.net>
---
drivers/pcmcia/ti113x.h | 37 +++++++++++++++++++++++++++++++++++--
drivers/pcmcia/yenta_socket.c | 24 +++++++++++++-----------
2 files changed, 48 insertions(+), 13 deletions(-)
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index aaa7022..9ffa97d 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -296,7 +296,7 @@ static int ti_init(struct yenta_socket *socket)
u8 new, reg = exca_readb(socket, I365_INTCTL);
new = reg & ~I365_INTR_ENA;
- if (socket->cb_irq)
+ if (socket->dev->irq)
new |= I365_INTR_ENA;
if (new != reg)
exca_writeb(socket, I365_INTCTL, new);
@@ -316,14 +316,47 @@ static int ti_override(struct yenta_socket *socket)
return 0;
}
+static void ti113x_use_isa_irq(struct yenta_socket *socket)
+{
+ int isa_irq = -1;
+ u8 intctl;
+ u32 isa_irq_mask = 0;
+
+ if (!isa_probe)
+ return;
+
+ /* get a free isa int */
+ isa_irq_mask = yenta_probe_irq(socket, isa_interrupts);
+ if (!isa_irq_mask)
+ return; /* no useable isa irq found */
+
+ /* choose highest available */
+ for (; isa_irq_mask; isa_irq++)
+ isa_irq_mask >>= 1;
+ socket->cb_irq = isa_irq;
+
+ exca_writeb(socket, I365_CSCINT, (isa_irq << 4));
+
+ intctl = exca_readb(socket, I365_INTCTL);
+ intctl &= ~(I365_INTR_ENA | I365_IRQ_MASK); /* CSC Enable */
+ exca_writeb(socket, I365_INTCTL, intctl);
+
+ dev_info(&socket->dev->dev,
+ "Yenta TI113x: using isa irq %d for CardBus\n", isa_irq);
+}
+
+
static int ti113x_override(struct yenta_socket *socket)
{
u8 cardctl;
cardctl = config_readb(socket, TI113X_CARD_CONTROL);
cardctl &= ~(TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_IREQ |
TI113X_CCR_PCI_CSC);
- if (socket->cb_irq)
+ if (socket->dev->irq)
cardctl |= TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_CSC |
TI113X_CCR_PCI_IREQ;
+ else
+ ti113x_use_isa_irq(socket);
+
config_writeb(socket, TI113X_CARD_CONTROL, cardctl);
return ti_override(socket);
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 51ee68d..d3afeaa 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -42,6 +42,18 @@ module_param_string(o2_speedup, o2_speedup,
sizeof(o2_speedup), 0444);
MODULE_PARM_DESC(o2_speedup, "Use prefetch/burst for O2-bridges: 'on', 'off' "
"or 'default' (uses recommended behaviour for the detected bridge)");
+/*
+ * Only probe "regular" interrupts, don't
+ * touch dangerous spots like the mouse irq,
+ * because there are mice that apparently
+ * get really confused if they get fondled
+ * too intimately.
+ *
+ * Default to 11, 10, 9, 7, 6, 5, 4, 3.
+ */
+static u32 isa_interrupts = 0x0ef8;
+
+
#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args)
/* Don't ask.. */
@@ -54,6 +66,7 @@ MODULE_PARM_DESC(o2_speedup, "Use prefetch/burst for
O2-bridges: 'on', 'off' "
*/
#ifdef CONFIG_YENTA_TI
static int yenta_probe_cb_irq(struct yenta_socket *socket);
+static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32
isa_irq_mask);
#endif
@@ -898,17 +911,6 @@ static struct cardbus_type cardbus_type[] = {
};
-/*
- * Only probe "regular" interrupts, don't
- * touch dangerous spots like the mouse irq,
- * because there are mice that apparently
- * get really confused if they get fondled
- * too intimately.
- *
- * Default to 11, 10, 9, 7, 6, 5, 4, 3.
- */
-static u32 isa_interrupts = 0x0ef8;
-
static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32
isa_irq_mask)
{
int i;
--
1.6.3.3
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
