From: Vladislav Bolkhovitin <[EMAIL PROTECTED]> Subject: Re: [Stgt-devel] Question for pass-through target design Date: Mon, 07 May 2007 19:27:23 +0400
> FUJITA Tomonori wrote: > > From: Vladislav Bolkhovitin <[EMAIL PROTECTED]> > > Subject: Re: [Stgt-devel] Question for pass-through target design > > Date: Mon, 07 May 2007 18:24:44 +0400 > > > > > >>FUJITA Tomonori wrote: > >> > >>>>>>It looks like the pass-through target support is currently broken, at > >>>>>>least as I've checked for ibmvstgt, but I think it's a general problem. > >>>>>>I wanted to check my assumptions and get ideas. > >>>>> > >>>>>Yeah, unfortunately, it works only with the iSCSI target driver (which > >>>>>runs in user space). > >>>>> > >>>>> > >>>>> > >>>>> > >>>>>>The code isn't allocating any memory to pass along to the sg code to > >>>>>>store > >>>>>>the result of a read or data for a write. Currently, dxferp for > >>>>>>sg_io_hdr > >>>>>>or dout_xferp/din_xferp for sg_io_v4 are assigned to the value of uaddr, > >>>>>>which is set to 0 in kern_queue_cmd. With the pointer set to NULL, > >>>>>>the pass-through target isn't going to function. Even if we had memory > >>>>>>allocated, there isn't a means of getting data to be written via sg down > >>>>>>this code path. > >>>>>> > >>>>>>What ideas are there as to how the data will get to user-space so that > >>>>>>we can use sg? > >>>>> > >>>>>For kernel-space drivers, we don't need to go to user-space. We can do > >>>>>the pass-through in kernel space. I talked with James about this last > >>>>>year and he said that if the code is implemented cleanly, he would > >>>>>merges it into mainline. > >>>> > >>>>We already have a pass-through in the kernel space for > >>>>kernel space drivers. It is the scsi_tgt* code. > >>> > >>> > >>>Could you elaborate more? > >>> > >>>What I meant that is that the kernel tgt code (scsi_tgt*) receives > >>>SCSI commands from one lld and send them to another lld instead of > >>>sending them to user space. > >> > >>Although the approach of passing SCSI commands from a target LLD to an > >>initiator one without any significant interventions from the target > >>software looks to be nice and simple, you should realize how limited, > >>unsafe and illegal it is, since it badly violates SCSI specs. > > > > > > I think that 'implemented cleanly' means that one scsi_host is assigned > > to only one initiator. > > Sorry, I don't fully understand you. If you mean you are going to limit > only one remote initiator per-target device, then, well, is it even more > limited (and limiting) or not? The target software assigns one scsi_host to only one remote initiator. For FC, NPIV works nicely. - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
