On Tue, Jan 17, 2017 at 1:31 AM, James Bottomley
<james.bottom...@hansenpartnership.com> wrote:
> From 91d249409546569444897a1ffde65c421e064899 Mon Sep 17 00:00:00 2001
> From: James Bottomley <james.bottom...@hansenpartnership.com>
> Date: Sun, 1 Jan 2017 09:39:24 -0800
> Subject: [PATCH] scsi: mpt3sas: fix hang on ata passthrough commands
>
> mpt3sas has a firmware failure where it can only handle one pass
> through ATA command at a time. If another comes in, contrary to the
> SAT standard, it will hang until the first one completes (causing long
> commands like secure erase to timeout). The original fix was to block
> the device when an ATA command came in, but this caused a regression
> with
>
> commit 669f044170d8933c3d66d231b69ea97cb8447338
> Author: Bart Van Assche <bart.vanass...@sandisk.com>
> Date: Tue Nov 22 16:17:13 2016 -0800
>
> scsi: srp_transport: Move queuecommand() wait code to SCSI core
>
> So fix the original fix of the secure erase timeout by properly
> returning SAM_STAT_BUSY like the SAT recommends. The original patch
> also had a concurrency problem since scsih_qcmd is lockless at that
> point (this is fixed by using atomic bitops to set and test the flag).
>
> Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination)
> Signed-off-by: James Bottomley <james.bottom...@hansenpartnership.com>
>
> ---
>
> v2 - use bitops for lockless atomicity
> v3 - update description, change function name
> ---
> drivers/scsi/mpt3sas/mpt3sas_base.h | 12 +++++++++++
> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 40
> +++++++++++++++++++++++-------------
> 2 files changed, 38 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
> b/drivers/scsi/mpt3sas/mpt3sas_base.h
> index 394fe13..dcb33f4 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_base.h
> +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
> @@ -393,6 +393,7 @@ struct MPT3SAS_TARGET {
> * @eedp_enable: eedp support enable bit
> * @eedp_type: 0(type_1), 1(type_2), 2(type_3)
> * @eedp_block_length: block size
> + * @ata_command_pending: SATL passthrough outstanding for device
> */
> struct MPT3SAS_DEVICE {
> struct MPT3SAS_TARGET *sas_target;
> @@ -404,6 +405,17 @@ struct MPT3SAS_DEVICE {
> u8 ignore_delay_remove;
> /* Iopriority Command Handling */
> u8 ncq_prio_enable;
> + /*
> + * Bug workaround for SATL handling: the mpt2/3sas firmware
> + * doesn't return BUSY or TASK_SET_FULL for subsequent
> + * commands while a SATL pass through is in operation as the
> + * spec requires, it simply does nothing with them until the
> + * pass through completes, causing them possibly to timeout if
> + * the passthrough is a long executing command (like format or
> + * secure erase). This variable allows us to do the right
> + * thing while a SATL command is pending.
> + */
> + unsigned long ata_command_pending;
>
> };
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index b5c966e..830e2c1 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -3899,9 +3899,18 @@ _scsih_temp_threshold_events(struct MPT3SAS_ADAPTER
> *ioc,
> }
> }
>
> -static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd)
> +static int _scsih_set_satl_pending(struct scsi_cmnd *scmd, bool pending)
> {
> - return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16);
> + struct MPT3SAS_DEVICE *priv = scmd->device->hostdata;
> +
> + if (scmd->cmnd[0] != ATA_12 && scmd->cmnd[0] != ATA_16)
> + return 0;
> +
> + if (pending)
> + return test_and_set_bit(0, &priv->ata_command_pending);
> +
> + clear_bit(0, &priv->ata_command_pending);
> + return 0;
> }
>
> /**
> @@ -3925,9 +3934,7 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
> if (!scmd)
> continue;
> count++;
> - if (ata_12_16_cmd(scmd))
> - scsi_internal_device_unblock(scmd->device,
> - SDEV_RUNNING);
> + _scsih_set_satl_pending(scmd, false);
> mpt3sas_base_free_smid(ioc, smid);
> scsi_dma_unmap(scmd);
> if (ioc->pci_error_recovery)
> @@ -4063,13 +4070,6 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd
> *scmd)
> if (ioc->logging_level & MPT_DEBUG_SCSI)
> scsi_print_command(scmd);
>
> - /*
> - * Lock the device for any subsequent command until command is
> - * done.
> - */
> - if (ata_12_16_cmd(scmd))
> - scsi_internal_device_block(scmd->device);
> -
> sas_device_priv_data = scmd->device->hostdata;
> if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
> scmd->result = DID_NO_CONNECT << 16;
> @@ -4083,6 +4083,19 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd
> *scmd)
> return 0;
> }
>
> + /*
> + * Bug work around for firmware SATL handling. The loop
> + * is based on atomic operations and ensures consistency
> + * since we're lockless at this point
> + */
> + do {
> + if (sas_device_priv_data->ata_command_pending) {
> + scmd->result = SAM_STAT_BUSY;
> + scmd->scsi_done(scmd);
> + return 0;
> + }
> + } while (_scsih_set_satl_pending(scmd, true));
> +
[Sreekanth] Just for readability purpose, can use use "if (test_bit(0,
&sas_device_priv_data->ata_command_pending)"
instead of "if (sas_device_priv_data->ata_command_pending)".
Since while setting & clearing the bit we are using atomic bit
operations. I don't see any issue functionality wise.
> sas_target_priv_data = sas_device_priv_data->sas_target;
>
> /* invalid device handle */
> @@ -4650,8 +4663,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid,
> u8 msix_index, u32 reply)
> if (scmd == NULL)
> return 1;
>
> - if (ata_12_16_cmd(scmd))
> - scsi_internal_device_unblock(scmd->device, SDEV_RUNNING);
> + _scsih_set_satl_pending(scmd, false);
>
> mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
>
> --
> 2.6.6
>
Tested this patch. It is working fine. Please consider this patch as
Acked-by: Sreekanth Reddy <sreekanth.re...@broadcom.com>
Thanks,
Sreekanth
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
