NVME Initiator: Tie in to NVME Fabrics nvme_fc LLDD initiator api
Adds the routines to:
- register and deregister the FC port as a nvme-fc initiator localport
- register and deregister remote FC ports as a nvme-fc remoteport.
- binding of nvme queues to adapter WQs
- send/perform NVME LS's
- send/perform NVME FCP initiator io operations
Signed-off-by: Dick Kennedy <dick.kenn...@broadcom.com>
Signed-off-by: James Smart <james.sm...@broadcom.com>
---
drivers/scsi/lpfc/Makefile | 7 +-
drivers/scsi/lpfc/lpfc.h | 5 +
drivers/scsi/lpfc/lpfc_crtn.h | 9 +
drivers/scsi/lpfc/lpfc_ct.c | 2 +-
drivers/scsi/lpfc/lpfc_els.c | 4 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 15 +-
drivers/scsi/lpfc/lpfc_init.c | 20 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +-
drivers/scsi/lpfc/lpfc_nvme.c | 2249 ++++++++++++++++++++++++++++++++++++
drivers/scsi/lpfc/lpfc_nvme.h | 6 +
drivers/scsi/lpfc/lpfc_sli.c | 21 +-
drivers/scsi/lpfc/lpfc_sli4.h | 1 +
drivers/scsi/lpfc/lpfc_vport.c | 16 +-
13 files changed, 2339 insertions(+), 20 deletions(-)
create mode 100644 drivers/scsi/lpfc/lpfc_nvme.c
diff --git a/drivers/scsi/lpfc/Makefile b/drivers/scsi/lpfc/Makefile
index e2516ba..cd7e1fc 100644
--- a/drivers/scsi/lpfc/Makefile
+++ b/drivers/scsi/lpfc/Makefile
@@ -28,6 +28,7 @@ endif
obj-$(CONFIG_SCSI_LPFC) := lpfc.o
-lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o lpfc_hbadisc.o \
- lpfc_init.o lpfc_mbox.o lpfc_nportdisc.o lpfc_scsi.o lpfc_attr.o \
- lpfc_vport.o lpfc_debugfs.o lpfc_bsg.o
+lpfc-objs := lpfc_mem.o lpfc_sli.o lpfc_ct.o lpfc_els.o \
+ lpfc_hbadisc.o lpfc_init.o lpfc_mbox.o lpfc_nportdisc.o \
+ lpfc_scsi.o lpfc_attr.o lpfc_vport.o lpfc_debugfs.o lpfc_bsg.o \
+ lpfc_nvme.o
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 72b4614..1dae886 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -123,6 +123,11 @@ struct perf_prof {
uint16_t wqidx[40];
};
+/*
+ * Provide for FC4 TYPE x28 - NVME. The
+ * bit mask for FCP and NVME is 0x8 identically
+ * because they are 32 bit positions distance.
+ */
#define LPFC_FC4_TYPE_BITMASK 0x00000100
/* Provide DMA memory definitions the driver uses per port instance. */
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 4b7decb..8592d6d 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -531,4 +531,13 @@ struct lpfc_scsi_buf *lpfc_get_scsi_buf(struct lpfc_hba
*phba,
struct lpfc_nodelist *ndlp);
/* NVME interfaces. */
+void lpfc_nvme_unregister_port(struct lpfc_nodelist *ndlp);
+int lpfc_nvme_register_port(struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp);
+int lpfc_nvme_create_localport(struct lpfc_vport *vport);
+void lpfc_nvme_destroy_localport(struct lpfc_vport *vport);
+void lpfc_nvme_update_localport(struct lpfc_vport *vport);
void lpfc_nvme_mod_param_dep(struct lpfc_hba *phba);
+void lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmdiocb,
+ struct lpfc_wcqe_complete *abts_cmpl);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 23d6a3c..ed285fc 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1412,7 +1412,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
if (((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
(phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) &&
(context == FC_TYPE_NVME)) {
- /* todo: init: revise localport nvme attributes */
+ lpfc_nvme_update_localport(vport);
CtReq->un.rff.type_code = context;
} else if (((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 3d915ee..6d2b163 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2625,7 +2625,9 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct
lpfc_iocbq *cmdiocb,
!(vport->fc_flag & FC_PT2PT_PLOGI)) {
phba->pport->fc_myDID = 0;
- /* todo: init: revise localport nvme attributes */
+ if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+ (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
+ lpfc_nvme_update_localport(phba->pport);
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 55a16f2..291a4cb 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -912,7 +912,9 @@ lpfc_linkdown(struct lpfc_hba *phba)
vports[i]->fc_myDID = 0;
- /* todo: init: revise localport nvme attributes */
+ if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+ (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
+ lpfc_nvme_update_localport(vports[i]);
}
}
lpfc_destroy_vport_work_array(phba, vports);
@@ -3585,7 +3587,9 @@ lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t
*pmb)
spin_unlock_irq(shost->host_lock);
vport->fc_myDID = 0;
- /* todo: init: revise localport nvme attributes */
+ if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+ (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
+ lpfc_nvme_update_localport(vport);
goto out;
}
@@ -3955,7 +3959,8 @@ lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba,
LPFC_MBOXQ_t *pmb)
if ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
(phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))
- lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, FC_TYPE_NVME);
+ lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0,
+ FC_TYPE_NVME);
/* Issue SCR just before NameServer GID_FT Query */
lpfc_issue_els_scr(vport, SCR_DID, 0);
@@ -4149,7 +4154,7 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct
lpfc_nodelist *ndlp,
((ndlp->nlp_fc4_type & NLP_FC4_NVME) ||
(ndlp->nlp_DID == Fabric_DID))) {
vport->phba->nport_event_cnt++;
- /* todo: init: unregister rport from nvme */
+ lpfc_nvme_unregister_port(ndlp);
}
}
@@ -4174,7 +4179,7 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct
lpfc_nodelist *ndlp,
* the register.
*/
vport->phba->nport_event_cnt++;
- /* todo: init: register rport with nvme */
+ lpfc_nvme_register_port(vport, ndlp);
}
}
}
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ea12eca..7ff04b0 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11157,7 +11157,23 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const
struct pci_device_id *pid)
/* Perform post initialization setup */
lpfc_post_init_setup(phba);
- /* todo: init: register port with nvme */
+ /* NVME support in FW earlier in the driver load corrects the
+ * FC4 type making a check for nvme_support unnecessary.
+ */
+ if ((phba->nvmet_support == 0) &&
+ (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {
+ /* Create NVME binding with nvme_fc_transport. This
+ * ensures the vport is initialized.
+ */
+ error = lpfc_nvme_create_localport(vport);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6004 NVME registration failed, "
+ "error x%x\n",
+ error);
+ goto out_disable_intr;
+ }
+ }
/* check for firmware upgrade or downgrade */
if (phba->cfg_request_firmware_upgrade)
@@ -11234,7 +11250,7 @@ lpfc_pci_remove_one_s4(struct pci_dev *pdev)
* is destroyed after to ensure all rports are io-disabled.
*/
lpfc_cleanup(vport);
- /* todo: init: unregister port with nvme */
+ lpfc_nvme_destroy_localport(vport);
/*
* Bring down the SLI Layer. This step disables all interrupts,
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c
b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 09bd7e2..8aa12ba 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1680,9 +1680,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport
*vport,
(phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) {
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
/* We need to update the localport also */
- /* todo: init: revise localport nvme
- * attributes
- */
+ lpfc_nvme_update_localport(vport);
}
} else if (ndlp->nlp_fc4_type == 0) {
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
new file mode 100644
index 0000000..defc7f2
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -0,0 +1,2249 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2016 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ ********************************************************************/
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/unaligned.h>
+#include <linux/crc-t10dif.h>
+#include <net/checksum.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
+
+#include <linux/nvme.h>
+#include <linux/nvme-fc-driver.h>
+#include <linux/nvme-fc.h>
+#include "lpfc_version.h"
+#include "lpfc_hw4.h"
+#include "lpfc_hw.h"
+#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
+#include "lpfc_nl.h"
+#include "lpfc_disc.h"
+#include "lpfc.h"
+#include "lpfc_nvme.h"
+#include "lpfc_scsi.h"
+#include "lpfc_logmsg.h"
+#include "lpfc_crtn.h"
+#include "lpfc_vport.h"
+
+/* NVME initiator-based functions */
+
+static struct lpfc_nvme_buf *
+lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp);
+
+static void
+lpfc_release_nvme_buf(struct lpfc_hba *, struct lpfc_nvme_buf *);
+
+
+/**
+ * lpfc_nvme_create_queue -
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
+ * @handle: An opaque driver handle used in follow-up calls.
+ *
+ * Driver registers this routine to preallocate and initialize any
+ * internal data structures to bind the @qidx to its internal IO queues.
+ * A hardware queue maps (qidx) to a specific driver MSI-X vector/EQ/CQ/WQ.
+ *
+ * Return value :
+ * 0 - Success
+ * -EINVAL - Unsupported input value.
+ * -ENOMEM - Could not alloc necessary memory
+ **/
+static int
+lpfc_nvme_create_queue(struct nvme_fc_local_port *pnvme_lport,
+ unsigned int qidx, u16 qsize,
+ void **handle)
+{
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_vport *vport;
+ struct lpfc_nvme_qhandle *qhandle;
+ char *str;
+
+ lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+ vport = lport->vport;
+ qhandle = kzalloc(sizeof(struct lpfc_nvme_qhandle), GFP_KERNEL);
+ if (qhandle == NULL)
+ return -ENOMEM;
+
+ qhandle->cpu_id = smp_processor_id();
+ qhandle->qidx = qidx;
+ /*
+ * NVME qidx == 0 is the admin queue, so both admin queue
+ * and first IO queue will use MSI-X vector and associated
+ * EQ/CQ/WQ at index 0. After that they are sequentially assigned.
+ */
+ if (qidx) {
+ str = "IO "; /* IO queue */
+ qhandle->index = ((qidx - 1) %
+ vport->phba->cfg_nvme_io_channel);
+ } else {
+ str = "ADM"; /* Admin queue */
+ qhandle->index = qidx;
+ }
+
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6073 Binding %s HdwQueue %d (cpu %d) to "
+ "io_channel %d qhandle %p\n", str,
+ qidx, qhandle->cpu_id, qhandle->index, qhandle);
+ *handle = (void *)qhandle;
+ return 0;
+}
+
+/**
+ * lpfc_nvme_delete_queue -
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @qidx: An cpu index used to affinitize IO queues and MSIX vectors.
+ * @handle: An opaque driver handle from lpfc_nvme_create_queue
+ *
+ * Driver registers this routine to free
+ * any internal data structures to bind the @qidx to its internal
+ * IO queues.
+ *
+ * Return value :
+ * 0 - Success
+ * TODO: What are the failure codes.
+ **/
+static void
+lpfc_nvme_delete_queue(struct nvme_fc_local_port *pnvme_lport,
+ unsigned int qidx,
+ void *handle)
+{
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_vport *vport;
+
+ lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+ vport = lport->vport;
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
+ "6001 ENTER. lpfc_pnvme %p, qidx x%xi qhandle %p\n",
+ lport, qidx, handle);
+ kfree(handle);
+}
+
+static void
+lpfc_nvme_localport_delete(struct nvme_fc_local_port *localport)
+{
+ struct lpfc_nvme_lport *lport = localport->private;
+
+ /* release any threads waiting for the unreg to complete */
+ complete(&lport->lport_unreg_done);
+}
+
+static void
+lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
+{
+ struct lpfc_nvme_rport *rport = remoteport->private;
+
+ /* release any threads waiting for the unreg to complete */
+ complete(&rport->rport_unreg_done);
+}
+
+static void
+lpfc_nvme_cmpl_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdwqe,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_vport *vport = cmdwqe->vport;
+ uint32_t status;
+ struct nvmefc_ls_req *pnvme_lsreq;
+ struct lpfc_dmabuf *buf_ptr;
+ struct lpfc_nodelist *ndlp;
+
+ vport->phba->fc4NvmeLsCmpls++;
+
+ pnvme_lsreq = (struct nvmefc_ls_req *)cmdwqe->context2;
+ status = bf_get(lpfc_wcqe_c_status, wcqe) & LPFC_IOCB_STATUS_MASK;
+ ndlp = (struct lpfc_nodelist *)cmdwqe->context1;
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
+ "6047 nvme cmpl Enter "
+ "Data %p DID %x Xri: %x status %x cmd:%p lsreg:%p "
+ "bmp:%p ndlp:%p\n",
+ pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
+ cmdwqe->sli4_xritag, status,
+ cmdwqe, pnvme_lsreq, cmdwqe->context3, ndlp);
+
+ if (cmdwqe->context3) {
+ buf_ptr = (struct lpfc_dmabuf *)cmdwqe->context3;
+ lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
+ kfree(buf_ptr);
+ cmdwqe->context3 = NULL;
+ }
+ if (pnvme_lsreq->done)
+ pnvme_lsreq->done(pnvme_lsreq, status);
+ else
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
+ "6046 nvme cmpl without done call back? "
+ "Data %p DID %x Xri: %x status %x\n",
+ pnvme_lsreq, ndlp ? ndlp->nlp_DID : 0,
+ cmdwqe->sli4_xritag, status);
+ if (ndlp) {
+ lpfc_nlp_put(ndlp);
+ cmdwqe->context1 = NULL;
+ }
+ lpfc_sli_release_iocbq(phba, cmdwqe);
+}
+
+static int
+lpfc_nvme_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
+ struct lpfc_dmabuf *inp,
+ struct nvmefc_ls_req *pnvme_lsreq,
+ void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
+ struct lpfc_wcqe_complete *),
+ struct lpfc_nodelist *ndlp, uint32_t num_entry,
+ uint32_t tmo, uint8_t retry)
+{
+ struct lpfc_hba *phba = vport->phba;
+ union lpfc_wqe *wqe;
+ struct lpfc_iocbq *genwqe;
+ struct ulp_bde64 *bpl;
+ struct ulp_bde64 bde;
+ int i, rc, xmit_len, first_len;
+
+ /* Allocate buffer for command WQE */
+ genwqe = lpfc_sli_get_iocbq(phba);
+ if (genwqe == NULL)
+ return 1;
+
+ wqe = &genwqe->wqe;
+ memset(wqe, 0, sizeof(union lpfc_wqe));
+
+ genwqe->context3 = (uint8_t *)bmp;
+ genwqe->iocb_flag |= LPFC_IO_NVME_LS;
+
+ /* Save for completion so we can release these resources */
+ genwqe->context1 = lpfc_nlp_get(ndlp);
+ genwqe->context2 = (uint8_t *)pnvme_lsreq;
+ /* Fill in payload, bp points to frame payload */
+
+ if (!tmo)
+ /* FC spec states we need 3 * ratov for CT requests */
+ tmo = (3 * phba->fc_ratov);
+
+ /* For this command calculate the xmit length of the request bde. */
+ xmit_len = 0;
+ first_len = 0;
+ bpl = (struct ulp_bde64 *)bmp->virt;
+ for (i = 0; i < num_entry; i++) {
+ bde.tus.w = bpl[i].tus.w;
+ if (bde.tus.f.bdeFlags != BUFF_TYPE_BDE_64)
+ break;
+ xmit_len += bde.tus.f.bdeSize;
+ if (i == 0)
+ first_len = xmit_len;
+ }
+
+ genwqe->rsvd2 = num_entry;
+ genwqe->hba_wqidx = 0;
+
+ /* Words 0 - 2 */
+ wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ wqe->generic.bde.tus.f.bdeSize = first_len;
+ wqe->generic.bde.addrLow = bpl[0].addrLow;
+ wqe->generic.bde.addrHigh = bpl[0].addrHigh;
+
+ /* Word 3 */
+ wqe->gen_req.request_payload_len = first_len;
+
+ /* Word 4 */
+
+ /* Word 5 */
+ bf_set(wqe_dfctl, &wqe->gen_req.wge_ctl, 0);
+ bf_set(wqe_si, &wqe->gen_req.wge_ctl, 1);
+ bf_set(wqe_la, &wqe->gen_req.wge_ctl, 1);
+ bf_set(wqe_rctl, &wqe->gen_req.wge_ctl, FC_RCTL_DD_UNSOL_CTL);
+ bf_set(wqe_type, &wqe->gen_req.wge_ctl, FC_TYPE_NVME);
+
+ /* Word 6 */
+ bf_set(wqe_ctxt_tag, &wqe->gen_req.wqe_com,
+ phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
+ bf_set(wqe_xri_tag, &wqe->gen_req.wqe_com, genwqe->sli4_xritag);
+
+ /* Word 7 */
+ bf_set(wqe_tmo, &wqe->gen_req.wqe_com, (vport->phba->fc_ratov-1));
+ bf_set(wqe_class, &wqe->gen_req.wqe_com, CLASS3);
+ bf_set(wqe_cmnd, &wqe->gen_req.wqe_com, CMD_GEN_REQUEST64_WQE);
+ bf_set(wqe_ct, &wqe->gen_req.wqe_com, SLI4_CT_RPI);
+
+ /* Word 8 */
+ wqe->gen_req.wqe_com.abort_tag = genwqe->iotag;
+
+ /* Word 9 */
+ bf_set(wqe_reqtag, &wqe->gen_req.wqe_com, genwqe->iotag);
+
+ /* Word 10 */
+ bf_set(wqe_dbde, &wqe->gen_req.wqe_com, 1);
+ bf_set(wqe_iod, &wqe->gen_req.wqe_com, LPFC_WQE_IOD_READ);
+ bf_set(wqe_qosd, &wqe->gen_req.wqe_com, 1);
+ bf_set(wqe_lenloc, &wqe->gen_req.wqe_com, LPFC_WQE_LENLOC_NONE);
+ bf_set(wqe_ebde_cnt, &wqe->gen_req.wqe_com, 0);
+
+ /* Word 11 */
+ bf_set(wqe_cqid, &wqe->gen_req.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+ bf_set(wqe_cmd_type, &wqe->gen_req.wqe_com, OTHER_COMMAND);
+
+
+ /* Issue GEN REQ WQE for NPORT <did> */
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+ "6050 Issue GEN REQ WQE to NPORT x%x "
+ "Data: x%x x%x wq:%p lsreq:%p bmp:%p xmit:%d 1st:%d\n",
+ ndlp->nlp_DID, genwqe->iotag,
+ vport->port_state,
+ genwqe, pnvme_lsreq, bmp, xmit_len, first_len);
+ genwqe->wqe_cmpl = cmpl;
+ genwqe->iocb_cmpl = NULL;
+ genwqe->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
+ genwqe->vport = vport;
+ genwqe->retry = retry;
+
+ rc = lpfc_sli4_issue_wqe(phba, LPFC_ELS_RING, genwqe);
+ if (rc == WQE_ERROR) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "6045 Issue GEN REQ WQE to NPORT x%x "
+ "Data: x%x x%x\n",
+ ndlp->nlp_DID, genwqe->iotag,
+ vport->port_state);
+ lpfc_sli_release_iocbq(phba, genwqe);
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_nvme_ls_req - Issue an Link Service request
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @lpfc_nvme_lport: Pointer to the driver's local port data
+ * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
+ *
+ * Driver registers this routine to handle any link service request
+ * from the nvme_fc transport to a remote nvme-aware port.
+ *
+ * Return value :
+ * 0 - Success
+ * TODO: What are the failure codes.
+ **/
+static int
+lpfc_nvme_ls_req(struct nvme_fc_local_port *pnvme_lport,
+ struct nvme_fc_remote_port *pnvme_rport,
+ struct nvmefc_ls_req *pnvme_lsreq)
+{
+ int ret = 0;
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ struct ulp_bde64 *bpl;
+ struct lpfc_dmabuf *bmp;
+
+ /* there are two dma buf in the request, actually there is one and
+ * the second one is just the start address + cmd size.
+ * Before calling lpfc_nvme_gen_req these buffers need to be wrapped
+ * in a lpfc_dmabuf struct. When freeing we just free the wrapper
+ * because the nvem layer owns the data bufs.
+ * We do not have to break these packets open, we don't care what is in
+ * them. And we do not have to look at the resonse data, we only care
+ * that we got a response. All of the caring is going to happen in the
+ * nvme-fc layer.
+ */
+
+ lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+ vport = lport->vport;
+
+ ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
+ if (!ndlp) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
+ "6043 Could not find node for DID %x\n",
+ pnvme_rport->port_id);
+ return 1;
+ }
+ bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!bmp) {
+
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
+ "6044 Could not find node for DID %x\n",
+ pnvme_rport->port_id);
+ return 2;
+ }
+ INIT_LIST_HEAD(&bmp->list);
+ bmp->virt = lpfc_mbuf_alloc(vport->phba, MEM_PRI, &(bmp->phys));
+ if (!bmp->virt) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
+ "6042 Could not find node for DID %x\n",
+ pnvme_rport->port_id);
+ kfree(bmp);
+ return 3;
+ }
+ bpl = (struct ulp_bde64 *)bmp->virt;
+ bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rqstdma));
+ bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rqstdma));
+ bpl->tus.f.bdeFlags = 0;
+ bpl->tus.f.bdeSize = pnvme_lsreq->rqstlen;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+ bpl++;
+
+ bpl->addrHigh = le32_to_cpu(putPaddrHigh(pnvme_lsreq->rspdma));
+ bpl->addrLow = le32_to_cpu(putPaddrLow(pnvme_lsreq->rspdma));
+ bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
+ bpl->tus.f.bdeSize = pnvme_lsreq->rsplen;
+ bpl->tus.w = le32_to_cpu(bpl->tus.w);
+
+ /* Expand print to include key fields. */
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
+ "6051 ENTER. lport %p, rport %p lsreq%p rqstlen:%d "
+ "rsplen:%d %llux %llux\n",
+ pnvme_lport, pnvme_rport,
+ pnvme_lsreq, pnvme_lsreq->rqstlen,
+ pnvme_lsreq->rsplen, pnvme_lsreq->rqstdma,
+ pnvme_lsreq->rspdma);
+
+ vport->phba->fc4NvmeLsRequests++;
+
+ /* Hardcode the wait to 30 seconds. Connections are failing otherwise.
+ * This code allows it all to work.
+ */
+ ret = lpfc_nvme_gen_req(vport, bmp, pnvme_lsreq->rqstaddr,
+ pnvme_lsreq, lpfc_nvme_cmpl_gen_req,
+ ndlp, 2, 30, 0);
+ if (ret != WQE_SUCCESS) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
+ "6052 EXIT. issue ls wqe failed lport %p, "
+ "rport %p lsreq%p Status %x DID %x\n",
+ pnvme_lport, pnvme_rport, pnvme_lsreq,
+ ret, ndlp->nlp_DID);
+ lpfc_mbuf_free(vport->phba, bmp->virt, bmp->phys);
+ kfree(bmp);
+ return ret;
+ }
+
+ /* Stub in routine and return 0 for now. */
+ return ret;
+}
+
+/**
+ * lpfc_nvme_ls_abort - Issue an Link Service request
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @lpfc_nvme_lport: Pointer to the driver's local port data
+ * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
+ *
+ * Driver registers this routine to handle any link service request
+ * from the nvme_fc transport to a remote nvme-aware port.
+ *
+ * Return value :
+ * 0 - Success
+ * TODO: What are the failure codes.
+ **/
+static void
+lpfc_nvme_ls_abort(struct nvme_fc_local_port *pnvme_lport,
+ struct nvme_fc_remote_port *pnvme_rport,
+ struct nvmefc_ls_req *pnvme_lsreq)
+{
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_vport *vport;
+ struct lpfc_hba *phba;
+ struct lpfc_nodelist *ndlp;
+ LIST_HEAD(abort_list);
+ struct lpfc_sli_ring *pring;
+ struct lpfc_iocbq *wqe, *next_wqe;
+
+ lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+ vport = lport->vport;
+ phba = vport->phba;
+
+ ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
+ if (!ndlp) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
+ "6049 Could not find node for DID %x\n",
+ pnvme_rport->port_id);
+ return;
+ }
+
+ /* Expand print to include key fields. */
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_ABTS,
+ "6040 ENTER. lport %p, rport %p lsreq %p rqstlen:%d "
+ "rsplen:%d %llux %llux\n",
+ pnvme_lport, pnvme_rport,
+ pnvme_lsreq, pnvme_lsreq->rqstlen,
+ pnvme_lsreq->rsplen, pnvme_lsreq->rqstdma,
+ pnvme_lsreq->rspdma);
+
+ /*
+ * Lock the ELS ring txcmplq and build a local list of all ELS IOs
+ * that need an ABTS. The IOs need to stay on the txcmplq so that
+ * the abort operation completes them successfully.
+ */
+ pring = phba->sli4_hba.nvmels_wq->pring;
+ spin_lock_irq(&phba->hbalock);
+ spin_lock(&pring->ring_lock);
+ list_for_each_entry_safe(wqe, next_wqe, &pring->txcmplq, list) {
+ /* Add to abort_list on on NDLP match. */
+ if (lpfc_check_sli_ndlp(phba, pring, wqe, ndlp)) {
+ wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
+ list_add_tail(&wqe->dlist, &abort_list);
+ }
+ }
+ spin_unlock(&pring->ring_lock);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Abort the targeted IOs and remove them from the abort list. */
+ list_for_each_entry_safe(wqe, next_wqe, &abort_list, dlist) {
+ spin_lock_irq(&phba->hbalock);
+ list_del_init(&wqe->dlist);
+ lpfc_sli_issue_abort_iotag(phba, pring, wqe);
+ spin_unlock_irq(&phba->hbalock);
+ }
+}
+
+/* Fix up the existing sgls for NVME IO. */
+static void
+lpfc_nvme_adj_fcp_sgls(struct lpfc_vport *vport,
+ struct lpfc_nvme_buf *lpfc_ncmd,
+ struct nvmefc_fcp_req *nCmd)
+{
+ struct sli4_sge *sgl;
+ union lpfc_wqe128 *wqe;
+ uint32_t *wptr, *dptr;
+
+ /*
+ * Adjust the FCP_CMD and FCP_RSP DMA data and sge_len to
+ * match NVME. NVME sends 96 bytes. Also, use the
+ * nvme commands command and response dma addresses
+ * rather than the virtual memory to ease the restore
+ * operation.
+ */
+ sgl = lpfc_ncmd->nvme_sgl;
+ sgl->sge_len = cpu_to_le32(nCmd->cmdlen);
+
+ sgl++;
+
+ /* Setup the physical region for the FCP RSP */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(nCmd->rspdma));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(nCmd->rspdma));
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ if (nCmd->sg_cnt)
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->sge_len = cpu_to_le32(nCmd->rsplen);
+
+ /*
+ * Get a local pointer to the built-in wqe and correct
+ * the cmd size to match NVME's 96 bytes and fix
+ * the dma address.
+ */
+
+ /* 128 byte wqe support here */
+ wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
+
+ /* Word 0-2 - NVME CMND IU (embedded payload) */
+ wqe->generic.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ wqe->generic.bde.tus.f.bdeSize = 60;
+ wqe->generic.bde.addrHigh = 0;
+ wqe->generic.bde.addrLow = 64; /* Word 16 */
+
+ /* Word 3 */
+ bf_set(payload_offset_len, &wqe->fcp_icmd,
+ (nCmd->rsplen + nCmd->cmdlen));
+
+ /* Word 10 */
+ bf_set(wqe_nvme, &wqe->fcp_icmd.wqe_com, 1);
+ bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
+
+ /*
+ * Embed the payload in the last half of the WQE
+ * WQE words 16-30 get the NVME CMD IU payload
+ *
+ * WQE Word 16 is already setup with flags
+ * WQE words 17-19 get payload Words 2-4
+ * WQE words 20-21 get payload Words 6-7
+ * WQE words 22-29 get payload Words 16-23
+ */
+ wptr = &wqe->words[17]; /* WQE ptr */
+ dptr = (uint32_t *)nCmd->cmdaddr; /* payload ptr */
+ dptr += 2; /* Skip Words 0-1 in payload */
+
+ *wptr++ = *dptr++; /* Word 2 */
+ *wptr++ = *dptr++; /* Word 3 */
+ *wptr++ = *dptr++; /* Word 4 */
+ dptr++; /* Skip Word 5 in payload */
+ *wptr++ = *dptr++; /* Word 6 */
+ *wptr++ = *dptr++; /* Word 7 */
+ dptr += 8; /* Skip Words 8-15 in payload */
+ *wptr++ = *dptr++; /* Word 16 */
+ *wptr++ = *dptr++; /* Word 17 */
+ *wptr++ = *dptr++; /* Word 18 */
+ *wptr++ = *dptr++; /* Word 19 */
+ *wptr++ = *dptr++; /* Word 20 */
+ *wptr++ = *dptr++; /* Word 21 */
+ *wptr++ = *dptr++; /* Word 22 */
+ *wptr = *dptr; /* Word 23 */
+}
+
+/**
+ * lpfc_nvme_io_cmd_wqe_cmpl - Complete an NVME-over-FCP IO
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @lpfc_nvme_lport: Pointer to the driver's local port data
+ * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
+ *
+ * Driver registers this routine as it io request handler. This
+ * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
+ * data structure to the rport indicated in @lpfc_nvme_rport.
+ *
+ * Return value :
+ * 0 - Success
+ * TODO: What are the failure codes.
+ **/
+static void
+lpfc_nvme_io_cmd_wqe_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeIn,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_nvme_buf *lpfc_ncmd =
+ (struct lpfc_nvme_buf *)pwqeIn->context1;
+ struct lpfc_vport *vport = pwqeIn->vport;
+ struct nvmefc_fcp_req *nCmd;
+ struct nvme_fc_ersp_iu *ep;
+ struct nvme_fc_cmd_iu *cp;
+ struct lpfc_nvme_rport *rport;
+ struct lpfc_nodelist *ndlp;
+ unsigned long flags;
+ uint32_t code;
+ uint16_t cid, sqhd, data;
+ uint32_t *ptr;
+
+ /* Sanity check on return of outstanding command */
+ if (!lpfc_ncmd || !lpfc_ncmd->nvmeCmd || !lpfc_ncmd->nrport) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
+ "6071 Completion pointers bad on wqe %p.\n",
+ wcqe);
+ return;
+ }
+ phba->fc4NvmeIoCmpls++;
+
+ nCmd = lpfc_ncmd->nvmeCmd;
+ rport = lpfc_ncmd->nrport;
+
+ /*
+ * Catch race where our node has transitioned, but the
+ * transport is still transitioning.
+ */
+ ndlp = rport->ndlp;
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
+ "6061 rport %p, ndlp %p, DID x%06x ndlp "
+ "not ready.\n",
+ rport, ndlp, rport->remoteport->port_id);
+
+ ndlp = lpfc_findnode_did(vport, rport->remoteport->port_id);
+ if (!ndlp) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
+ "6062 Ignoring NVME cmpl. No ndlp\n");
+ goto out_err;
+ }
+ }
+
+ code = bf_get(lpfc_wcqe_c_code, wcqe);
+ if (code == CQE_CODE_NVME_ERSP) {
+ /* For this type of CQE, we need to rebuild the rsp */
+ ep = (struct nvme_fc_ersp_iu *)nCmd->rspaddr;
+
+ /*
+ * Get Command Id from cmd to plug into response. This
+ * code is not needed in the next NVME Transport drop.
+ */
+ cp = (struct nvme_fc_cmd_iu *)nCmd->cmdaddr;
+ cid = cp->sqe.common.command_id;
+
+ /*
+ * RSN is in CQE word 2
+ * SQHD is in CQE Word 3 bits 15:0
+ * Cmd Specific info is in CQE Word 1
+ * and in CQE Word 0 bits 15:0
+ */
+ sqhd = bf_get(lpfc_wcqe_c_sqhead, wcqe);
+
+ /* Now lets build the NVME ERSP IU */
+ ep->iu_len = cpu_to_be16(8);
+ ep->rsn = wcqe->parameter;
+ ep->xfrd_len = cpu_to_be32(nCmd->payload_length);
+ ep->rsvd12 = 0;
+ ptr = (uint32_t *)&ep->cqe.result.u64;
+ *ptr++ = wcqe->total_data_placed;
+ data = bf_get(lpfc_wcqe_c_ersp0, wcqe);
+ *ptr = (uint32_t)data;
+ ep->cqe.sq_head = sqhd;
+ ep->cqe.sq_id = nCmd->sqid;
+ ep->cqe.command_id = cid;
+ ep->cqe.status = 0;
+
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ lpfc_ncmd->result = 0;
+ nCmd->rcv_rsplen = LPFC_NVME_ERSP_LEN;
+ nCmd->transferred_length = nCmd->payload_length;
+ } else {
+ lpfc_ncmd->status = (bf_get(lpfc_wcqe_c_status, wcqe) &
+ LPFC_IOCB_STATUS_MASK);
+ lpfc_ncmd->result = wcqe->parameter;
+
+ /* For NVME, the only failure path that results in an
+ * IO error is when the adapter rejects it. All other
+ * conditions are a success case and resolved by the
+ * transport.
+ * IOSTAT_FCP_RSP_ERROR means:
+ * 1. Length of data received doesn't match total
+ * transfer length in WQE
+ * 2. If the RSP payload does NOT match these cases:
+ * a. RSP length 12/24 bytes and all zeros
+ * b. NVME ERSP
+ */
+ switch (lpfc_ncmd->status) {
+ case IOSTAT_SUCCESS:
+ nCmd->transferred_length = wcqe->total_data_placed;
+ nCmd->rcv_rsplen = 0;
+ nCmd->status = 0;
+ break;
+ case IOSTAT_FCP_RSP_ERROR:
+ nCmd->transferred_length = wcqe->total_data_placed;
+ nCmd->rcv_rsplen = wcqe->parameter;
+ nCmd->status = 0;
+ /* Sanity check */
+ if (nCmd->rcv_rsplen == LPFC_NVME_ERSP_LEN)
+ break;
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
+ "6081 NVME Completion Protocol Error: "
+ "status x%x result x%x placed x%x\n",
+ lpfc_ncmd->status, lpfc_ncmd->result,
+ wcqe->total_data_placed);
+ break;
+ default:
+out_err:
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
+ "6072 NVME Completion Error: "
+ "status x%x result x%x placed x%x\n",
+ lpfc_ncmd->status, lpfc_ncmd->result,
+ wcqe->total_data_placed);
+ nCmd->transferred_length = 0;
+ nCmd->rcv_rsplen = 0;
+ nCmd->status = NVME_SC_FC_TRANSPORT_ERROR;
+ }
+ }
+
+ /* pick up SLI4 exhange busy condition */
+ if (bf_get(lpfc_wcqe_c_xb, wcqe))
+ lpfc_ncmd->flags |= LPFC_SBUF_XBUSY;
+ else
+ lpfc_ncmd->flags &= ~LPFC_SBUF_XBUSY;
+
+ if (ndlp && NLP_CHK_NODE_ACT(ndlp))
+ atomic_dec(&ndlp->cmd_pending);
+
+ /* Update stats and complete the IO. There is
+ * no need for dma unprep because the nvme_transport
+ * owns the dma address.
+ */
+ nCmd->done(nCmd);
+
+ spin_lock_irqsave(&phba->hbalock, flags);
+ lpfc_ncmd->nrport = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+
+ lpfc_release_nvme_buf(phba, lpfc_ncmd);
+}
+
+
+/**
+ * lpfc_nvme_prep_io_cmd - Issue an NVME-over-FCP IO
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @lpfc_nvme_lport: Pointer to the driver's local port data
+ * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
+ * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
+ * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
+ *
+ * Driver registers this routine as it io request handler. This
+ * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
+ * data structure to the rport indicated in @lpfc_nvme_rport.
+ *
+ * Return value :
+ * 0 - Success
+ * TODO: What are the failure codes.
+ **/
+static int
+lpfc_nvme_prep_io_cmd(struct lpfc_vport *vport,
+ struct lpfc_nvme_buf *lpfc_ncmd,
+ struct lpfc_nodelist *pnode)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
+ struct lpfc_iocbq *pwqeq = &(lpfc_ncmd->cur_iocbq);
+ union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
+ uint32_t req_len;
+
+ if (!pnode || !NLP_CHK_NODE_ACT(pnode))
+ return -EINVAL;
+
+ /*
+ * There are three possibilities here - use scatter-gather segment, use
+ * the single mapping, or neither.
+ */
+ wqe->fcp_iwrite.initial_xfer_len = 0;
+ if (nCmd->sg_cnt) {
+ if (nCmd->io_dir == NVMEFC_FCP_WRITE) {
+ /* Word 5 */
+ if ((phba->cfg_nvme_enable_fb) &&
+ (pnode->nlp_flag & NLP_FIRSTBURST)) {
+ req_len = lpfc_ncmd->nvmeCmd->payload_length;
+ if (req_len < pnode->nvme_fb_size)
+ wqe->fcp_iwrite.initial_xfer_len =
+ req_len;
+ else
+ wqe->fcp_iwrite.initial_xfer_len =
+ pnode->nvme_fb_size;
+ }
+
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->generic.wqe_com,
+ CMD_FCP_IWRITE64_WQE);
+ bf_set(wqe_pu, &wqe->generic.wqe_com,
+ PARM_READ_CHECK);
+
+ /* Word 10 */
+ bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0);
+ bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com,
+ LPFC_WQE_IOD_WRITE);
+ bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com,
+ LPFC_WQE_LENLOC_WORD4);
+ if (phba->cfg_nvme_oas)
+ bf_set(wqe_oas, &wqe->fcp_iwrite.wqe_com, 1);
+
+ /* Word 11 */
+ bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
+ NVME_WRITE_CMD);
+
+ /* Word 16 */
+ wqe->words[16] = LPFC_NVME_EMBED_WRITE;
+
+ phba->fc4NvmeOutputRequests++;
+ } else {
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->generic.wqe_com,
+ CMD_FCP_IREAD64_WQE);
+ bf_set(wqe_pu, &wqe->generic.wqe_com,
+ PARM_READ_CHECK);
+
+ /* Word 10 */
+ bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0);
+ bf_set(wqe_iod, &wqe->fcp_iread.wqe_com,
+ LPFC_WQE_IOD_READ);
+ bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com,
+ LPFC_WQE_LENLOC_WORD4);
+ if (phba->cfg_nvme_oas)
+ bf_set(wqe_oas, &wqe->fcp_iread.wqe_com, 1);
+
+ /* Word 11 */
+ bf_set(wqe_cmd_type, &wqe->generic.wqe_com,
+ NVME_READ_CMD);
+
+ /* Word 16 */
+ wqe->words[16] = LPFC_NVME_EMBED_READ;
+
+ phba->fc4NvmeInputRequests++;
+ }
+ } else {
+ /* Word 4 */
+ wqe->fcp_icmd.rsrvd4 = 0;
+
+ /* Word 7 */
+ bf_set(wqe_cmnd, &wqe->generic.wqe_com, CMD_FCP_ICMND64_WQE);
+ bf_set(wqe_pu, &wqe->generic.wqe_com, 0);
+
+ /* Word 10 */
+ bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
+ bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_WRITE);
+ bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com,
+ LPFC_WQE_LENLOC_NONE);
+ if (phba->cfg_nvme_oas)
+ bf_set(wqe_oas, &wqe->fcp_icmd.wqe_com, 1);
+
+ /* Word 11 */
+ bf_set(wqe_cmd_type, &wqe->generic.wqe_com, NVME_READ_CMD);
+
+ /* Word 16 */
+ wqe->words[16] = LPFC_NVME_EMBED_CMD;
+
+ phba->fc4NvmeControlRequests++;
+ }
+ /*
+ * Finish initializing those WQE fields that are independent
+ * of the nvme_cmnd request_buffer
+ */
+
+ /* Word 6 */
+ bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com,
+ phba->sli4_hba.rpi_ids[pnode->nlp_rpi]);
+ bf_set(wqe_xri_tag, &wqe->generic.wqe_com, pwqeq->sli4_xritag);
+
+ /* Word 7 */
+ /* Preserve Class data in the ndlp. */
+ bf_set(wqe_class, &wqe->generic.wqe_com,
+ (pnode->nlp_fcp_info & 0x0f));
+
+ /* Word 8 */
+ wqe->generic.wqe_com.abort_tag = pwqeq->iotag;
+
+ /* Word 9 */
+ bf_set(wqe_reqtag, &wqe->generic.wqe_com, pwqeq->iotag);
+
+ /* Word 11 */
+ bf_set(wqe_cqid, &wqe->generic.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+
+ pwqeq->vport = vport;
+ return 0;
+}
+
+
+/**
+ * lpfc_nvme_prep_io_dma - Issue an NVME-over-FCP IO
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @lpfc_nvme_lport: Pointer to the driver's local port data
+ * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
+ * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
+ * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
+ *
+ * Driver registers this routine as it io request handler. This
+ * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
+ * data structure to the rport indicated in @lpfc_nvme_rport.
+ *
+ * Return value :
+ * 0 - Success
+ * TODO: What are the failure codes.
+ **/
+static int
+lpfc_nvme_prep_io_dma(struct lpfc_vport *vport,
+ struct lpfc_nvme_buf *lpfc_ncmd)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct nvmefc_fcp_req *nCmd = lpfc_ncmd->nvmeCmd;
+ union lpfc_wqe128 *wqe = (union lpfc_wqe128 *)&lpfc_ncmd->cur_iocbq.wqe;
+ struct sli4_sge *sgl = lpfc_ncmd->nvme_sgl;
+ struct scatterlist *data_sg;
+ struct sli4_sge *first_data_sgl;
+ dma_addr_t physaddr;
+ uint32_t num_bde = 0;
+ uint32_t dma_len;
+ uint32_t dma_offset = 0;
+ int nseg, i;
+
+ /* Fix up the command and response DMA stuff. */
+ lpfc_nvme_adj_fcp_sgls(vport, lpfc_ncmd, nCmd);
+
+ /*
+ * There are three possibilities here - use scatter-gather segment, use
+ * the single mapping, or neither.
+ */
+ if (nCmd->sg_cnt) {
+ /*
+ * Jump over the cmd and rsp SGEs. The fix routine
+ * has already adjusted for this.
+ */
+ sgl += 2;
+
+ first_data_sgl = sgl;
+ lpfc_ncmd->seg_cnt = nCmd->sg_cnt;
+ if (lpfc_ncmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
+ "6058 Too many sg segments from "
+ "NVME Transport. Max %d, "
+ "nvmeIO sg_cnt %d\n",
+ phba->cfg_sg_seg_cnt,
+ lpfc_ncmd->seg_cnt);
+ lpfc_ncmd->seg_cnt = 0;
+ return 1;
+ }
+
+ /*
+ * The driver established a maximum scatter-gather segment count
+ * during probe that limits the number of sg elements in any
+ * single nvme command. Just run through the seg_cnt and format
+ * the sge's.
+ */
+ nseg = nCmd->sg_cnt;
+ data_sg = nCmd->first_sgl;
+ for (i = 0; i < nseg; i++) {
+ if (data_sg == NULL) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
+ "6059 dptr err %d, nseg %d\n",
+ i, nseg);
+ lpfc_ncmd->seg_cnt = 0;
+ return 1;
+ }
+ physaddr = data_sg->dma_address;
+ dma_len = data_sg->length;
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ if ((num_bde + 1) == nseg)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->sge_len = cpu_to_le32(dma_len);
+
+ dma_offset += dma_len;
+ data_sg = sg_next(data_sg);
+ sgl++;
+ }
+ } else {
+ /* For this clause to be valid, the payload_length
+ * and sg_cnt must zero.
+ */
+ if (nCmd->payload_length != 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
+ "6063 NVME DMA Prep Err: sg_cnt %d "
+ "payload_length x%x\n",
+ nCmd->sg_cnt, nCmd->payload_length);
+ return 1;
+ }
+ }
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of WQE here
+ */
+ wqe->fcp_iread.total_xfer_len = nCmd->payload_length;
+ return 0;
+}
+
+/**
+ * lpfc_nvme_fcp_io_submit - Issue an NVME-over-FCP IO
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @lpfc_nvme_lport: Pointer to the driver's local port data
+ * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
+ * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
+ * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
+ *
+ * Driver registers this routine as it io request handler. This
+ * routine issues an fcp WQE with data from the @lpfc_nvme_fcpreq
+ * data structure to the rport
+ indicated in @lpfc_nvme_rport.
+ *
+ * Return value :
+ * 0 - Success
+ * TODO: What are the failure codes.
+ **/
+static int
+lpfc_nvme_fcp_io_submit(struct nvme_fc_local_port *pnvme_lport,
+ struct nvme_fc_remote_port *pnvme_rport,
+ void *hw_queue_handle,
+ struct nvmefc_fcp_req *pnvme_fcreq)
+{
+ int ret = 0;
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_vport *vport;
+ struct lpfc_hba *phba;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_nvme_buf *lpfc_ncmd;
+ struct lpfc_nvme_rport *rport;
+ struct lpfc_nvme_qhandle *lpfc_queue_info;
+
+ lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+ vport = lport->vport;
+ phba = vport->phba;
+
+ rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
+ lpfc_queue_info = (struct lpfc_nvme_qhandle *)hw_queue_handle;
+
+ /*
+ * Catch race where our node has transitioned, but the
+ * transport is still transitioning.
+ */
+ ndlp = rport->ndlp;
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
+ "6053 rport %p, ndlp %p, DID x%06x "
+ "ndlp not ready.\n",
+ rport, ndlp, pnvme_rport->port_id);
+
+ ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
+ if (!ndlp) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
+ "6066 Missing node for DID %x\n",
+ pnvme_rport->port_id);
+ ret = -ENODEV;
+ goto out_fail;
+ }
+ }
+
+ /* The remote node has to be a mapped target or it's an error. */
+ if ((ndlp->nlp_type & NLP_NVME_TARGET) &&
+ (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_IOERR,
+ "6036 rport %p, DID x%06x not ready for "
+ "IO. State x%x, Type x%x\n",
+ rport, pnvme_rport->port_id,
+ ndlp->nlp_state, ndlp->nlp_type);
+ ret = -ENODEV;
+ goto out_fail;
+
+ }
+
+ /* The node is shared with FCP IO, make sure the IO pending count does
+ * not exceed the programmed depth.
+ */
+ if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth) {
+ ret = -EAGAIN;
+ goto out_fail;
+ }
+
+ lpfc_ncmd = lpfc_get_nvme_buf(phba, ndlp);
+ if (lpfc_ncmd == NULL) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_IOERR,
+ "6065 driver's buffer pool is empty, "
+ "IO failed\n");
+ ret = -ENOMEM;
+ goto out_fail;
+ }
+
+ /*
+ * Store the data needed by the driver to issue, abort, and complete
+ * an IO.
+ * Do not let the IO hang out forever. There is no midlayer issuing
+ * an abort so inform the FW of the maximum IO pending time.
+ */
+ pnvme_fcreq->private = (void *)lpfc_ncmd;
+ lpfc_ncmd->nvmeCmd = pnvme_fcreq;
+ lpfc_ncmd->nrport = rport;
+ lpfc_ncmd->start_time = jiffies;
+
+ lpfc_nvme_prep_io_cmd(vport, lpfc_ncmd, ndlp);
+ ret = lpfc_nvme_prep_io_dma(vport, lpfc_ncmd);
+ if (ret) {
+ ret = -ENOMEM;
+ goto out_free_nvme_buf;
+ }
+
+ atomic_inc(&ndlp->cmd_pending);
+
+ /*
+ * Issue the IO on the WQ indicated by index in the hw_queue_handle.
+ * This identfier was create in our hardware queue create callback
+ * routine. The driver now is dependent on the IO queue steering from
+ * the transport. We are trusting the upper NVME layers know which
+ * index to use and that they have affinitized a CPU to this hardware
+ * queue. A hardware queue maps to a driver MSI-X vector/EQ/CQ/WQ.
+ */
+ lpfc_ncmd->cur_iocbq.hba_wqidx = lpfc_queue_info->index;
+
+ ret = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, &lpfc_ncmd->cur_iocbq);
+ if (ret) {
+ atomic_dec(&ndlp->cmd_pending);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
+ "6113 FCP could not issue WQE err %x "
+ "sid: x%x did: x%x oxid: x%x\n",
+ ret, vport->fc_myDID, ndlp->nlp_DID,
+ lpfc_ncmd->cur_iocbq.sli4_xritag);
+ ret = -EINVAL;
+ goto out_free_nvme_buf;
+ }
+
+ return 0;
+
+ out_free_nvme_buf:
+ lpfc_release_nvme_buf(phba, lpfc_ncmd);
+ out_fail:
+ return ret;
+}
+
+/**
+ * lpfc_nvme_abort_fcreq_cmpl - Complete an NVME FCP abort request.
+ * @phba: Pointer to HBA context object
+ * @cmdiocb: Pointer to command iocb object.
+ * @rspiocb: Pointer to response iocb object.
+ *
+ * This is the callback function for any NVME FCP IO that was aborted.
+ *
+ * Return value:
+ * None
+ **/
+void
+lpfc_nvme_abort_fcreq_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+ struct lpfc_wcqe_complete *abts_cmpl)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME,
+ "6145 ABORT_XRI_CN completing on rpi x%x "
+ "original iotag x%x, abort cmd iotag x%x "
+ "req_tag x%x, status x%x, hwstatus x%x\n",
+ cmdiocb->iocb.un.acxri.abortContextTag,
+ cmdiocb->iocb.un.acxri.abortIoTag,
+ cmdiocb->iotag,
+ bf_get(lpfc_wcqe_c_request_tag, abts_cmpl),
+ bf_get(lpfc_wcqe_c_status, abts_cmpl),
+ bf_get(lpfc_wcqe_c_hw_status, abts_cmpl));
+ lpfc_sli_release_iocbq(phba, cmdiocb);
+}
+
+/**
+ * lpfc_nvme_fcp_abort - Issue an NVME-over-FCP ABTS
+ * @lpfc_pnvme: Pointer to the driver's nvme instance data
+ * @lpfc_nvme_lport: Pointer to the driver's local port data
+ * @lpfc_nvme_rport: Pointer to the rport getting the @lpfc_nvme_ereq
+ * @lpfc_nvme_fcreq: IO request from nvme fc to driver.
+ * @hw_queue_handle: Driver-returned handle in lpfc_nvme_create_queue
+ *
+ * Driver registers this routine as its nvme request io abort handler. This
+ * routine issues an fcp Abort WQE with data from the @lpfc_nvme_fcpreq
+ * data structure to the rport indicated in @lpfc_nvme_rport. This routine
+ * is executed asynchronously - one the target is validated as "MAPPED" and
+ * ready for IO, the driver issues the abort request and returns.
+ *
+ * Return value:
+ * None
+ **/
+static void
+lpfc_nvme_fcp_abort(struct nvme_fc_local_port *pnvme_lport,
+ struct nvme_fc_remote_port *pnvme_rport,
+ void *hw_queue_handle,
+ struct nvmefc_fcp_req *pnvme_fcreq)
+{
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_vport *vport;
+ struct lpfc_hba *phba;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_nvme_rport *rport;
+ struct lpfc_nvme_buf *lpfc_nbuf;
+ struct lpfc_iocbq *abts_buf;
+ struct lpfc_iocbq *nvmereq_wqe;
+ union lpfc_wqe *abts_wqe;
+ unsigned long flags;
+ int ret_val;
+
+ lport = (struct lpfc_nvme_lport *)pnvme_lport->private;
+ rport = (struct lpfc_nvme_rport *)pnvme_rport->private;
+ vport = lport->vport;
+ phba = vport->phba;
+
+ /* Announce entry to new IO submit field. */
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
+ "6002 Abort Request to rport DID x%06x "
+ "for nvme_fc_req %p\n",
+ pnvme_rport->port_id,
+ pnvme_fcreq);
+
+ /*
+ * Catch race where our node has transitioned, but the
+ * transport is still transitioning.
+ */
+ ndlp = rport->ndlp;
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_ABTS,
+ "6054 rport %p, ndlp %p, DID x%06x ndlp "
+ " not ready.\n",
+ rport, ndlp, pnvme_rport->port_id);
+
+ ndlp = lpfc_findnode_did(vport, pnvme_rport->port_id);
+ if (!ndlp) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_ABTS,
+ "6055 Could not find node for "
+ "DID %x\n",
+ pnvme_rport->port_id);
+ return;
+ }
+ }
+
+ /* The remote node has to be ready to send an abort. */
+ if ((ndlp->nlp_state != NLP_STE_MAPPED_NODE) &&
+ !(ndlp->nlp_type & NLP_NVME_TARGET)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE | LOG_NVME_ABTS,
+ "6048 rport %p, DID x%06x not ready for "
+ "IO. State x%x, Type x%x\n",
+ rport, pnvme_rport->port_id,
+ ndlp->nlp_state, ndlp->nlp_type);
+ return;
+ }
+
+ /* If the hba is getting reset, this flag is set. It is
+ * cleared when the reset is complete and rings reestablished.
+ */
+ spin_lock_irqsave(&phba->hbalock, flags);
+ /* driver queued commands are in process of being flushed */
+ if (phba->hba_flag & HBA_NVME_IOQ_FLUSH) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6139 Driver in reset cleanup - flushing "
+ "NVME Req now. hba_flag x%x\n",
+ phba->hba_flag);
+ return;
+ }
+
+ lpfc_nbuf = (struct lpfc_nvme_buf *)pnvme_fcreq->private;
+ if (!lpfc_nbuf) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6140 NVME IO req has no matching lpfc nvme "
+ "io buffer. Skipping abort req.\n");
+ return;
+ } else if (!lpfc_nbuf->nvmeCmd) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6141 lpfc NVME IO req has no nvme_fcreq "
+ "io buffer. Skipping abort req.\n");
+ return;
+ }
+
+ /*
+ * The lpfc_nbuf and the mapped nvme_fcreq in the driver's
+ * state must match the nvme_fcreq passed by the nvme
+ * transport. If they don't match, it is likely the driver
+ * has already completed the NVME IO and the nvme transport
+ * has not seen it yet.
+ */
+ if (lpfc_nbuf->nvmeCmd != pnvme_fcreq) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6143 NVME req mismatch: "
+ "lpfc_nbuf %p nvmeCmd %p, "
+ "pnvme_fcreq %p. Skipping Abort\n",
+ lpfc_nbuf, lpfc_nbuf->nvmeCmd,
+ pnvme_fcreq);
+ return;
+ }
+
+ /* Don't abort IOs no longer on the pending queue. */
+ nvmereq_wqe = &lpfc_nbuf->cur_iocbq;
+ if (!(nvmereq_wqe->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6142 NVME IO req %p not queued - skipping "
+ "abort req\n",
+ pnvme_fcreq);
+ return;
+ }
+
+ /* Outstanding abort is in progress */
+ if (nvmereq_wqe->iocb_flag & LPFC_DRIVER_ABORTED) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6144 Outstanding NVME I/O Abort Request "
+ "still pending on nvme_fcreq %p, "
+ "lpfc_ncmd %p\n",
+ pnvme_fcreq, lpfc_nbuf);
+ return;
+ }
+
+ abts_buf = __lpfc_sli_get_iocbq(phba);
+ if (!abts_buf) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6136 No available abort wqes. Skipping "
+ "Abts req for nvme_fcreq %p.\n",
+ pnvme_fcreq);
+ return;
+ }
+
+ /* Ready - mark outstanding as aborted by driver. */
+ nvmereq_wqe->iocb_flag |= LPFC_DRIVER_ABORTED;
+
+ /* Complete prepping the abort wqe and issue to the FW. */
+ abts_wqe = &abts_buf->wqe;
+
+ /* WQEs are reused. Clear stale data and set key fields to
+ * zero like ia, iaab, iaar, xri_tag, and ctxt_tag.
+ */
+ memset(abts_wqe, 0, sizeof(union lpfc_wqe));
+ bf_set(abort_cmd_criteria, &abts_wqe->abort_cmd, T_XRI_TAG);
+
+ /* word 7 */
+ bf_set(wqe_ct, &abts_wqe->abort_cmd.wqe_com, 0);
+ bf_set(wqe_cmnd, &abts_wqe->abort_cmd.wqe_com, CMD_ABORT_XRI_CX);
+ bf_set(wqe_class, &abts_wqe->abort_cmd.wqe_com,
+ nvmereq_wqe->iocb.ulpClass);
+
+ /* word 8 - tell the FW to abort the IO associated with this
+ * outstanding exchange ID.
+ */
+ abts_wqe->abort_cmd.wqe_com.abort_tag = nvmereq_wqe->sli4_xritag;
+
+ /* word 9 - this is the iotag for the abts_wqe completion. */
+ bf_set(wqe_reqtag, &abts_wqe->abort_cmd.wqe_com,
+ abts_buf->iotag);
+
+ /* word 10 */
+ bf_set(wqe_wqid, &abts_wqe->abort_cmd.wqe_com, nvmereq_wqe->hba_wqidx);
+ bf_set(wqe_qosd, &abts_wqe->abort_cmd.wqe_com, 1);
+ bf_set(wqe_lenloc, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_LENLOC_NONE);
+
+ /* word 11 */
+ bf_set(wqe_cmd_type, &abts_wqe->abort_cmd.wqe_com, OTHER_COMMAND);
+ bf_set(wqe_wqec, &abts_wqe->abort_cmd.wqe_com, 1);
+ bf_set(wqe_cqid, &abts_wqe->abort_cmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+
+ /* ABTS WQE must go to the same WQ as the WQE to be aborted */
+ abts_buf->iocb_flag |= LPFC_IO_NVME;
+ abts_buf->hba_wqidx = nvmereq_wqe->hba_wqidx;
+ abts_buf->vport = vport;
+ abts_buf->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
+ ret_val = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abts_buf);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (ret_val == IOCB_ERROR) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6137 Failed abts issue_wqe with status x%x "
+ "for nvme_fcreq %p.\n",
+ ret_val, pnvme_fcreq);
+ lpfc_sli_release_iocbq(phba, abts_buf);
+ return;
+ }
+
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
+ "6138 Transport Abort NVME Request Issued for\n"
+ "ox_id x%x on reqtag x%x\n",
+ nvmereq_wqe->sli4_xritag,
+ abts_buf->iotag);
+}
+
+/* Declare and initialization an instance of the FC NVME template. */
+static struct nvme_fc_port_template lpfc_nvme_template = {
+ /* initiator-based functions */
+ .localport_delete = lpfc_nvme_localport_delete,
+ .remoteport_delete = lpfc_nvme_remoteport_delete,
+ .create_queue = lpfc_nvme_create_queue,
+ .delete_queue = lpfc_nvme_delete_queue,
+ .ls_req = lpfc_nvme_ls_req,
+ .fcp_io = lpfc_nvme_fcp_io_submit,
+ .ls_abort = lpfc_nvme_ls_abort,
+ .fcp_abort = lpfc_nvme_fcp_abort,
+
+ .max_hw_queues = 1,
+ .max_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
+ .max_dif_sgl_segments = LPFC_NVME_DEFAULT_SEGS,
+ .dma_boundary = 0xFFFFFFFF,
+
+ /* Sizes of additional private data for data structures.
+ * No use for the last two sizes at this time.
+ */
+ .local_priv_sz = sizeof(struct lpfc_nvme_lport),
+ .remote_priv_sz = sizeof(struct lpfc_nvme_rport),
+ .lsrqst_priv_sz = 0,
+ .fcprqst_priv_sz = 0,
+};
+
+/**
+ * lpfc_sli4_post_nvme_sgl_block - post a block of nvme sgl list to firmware
+ * @phba: pointer to lpfc hba data structure.
+ * @nblist: pointer to nvme buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+static int
+lpfc_sli4_post_nvme_sgl_block(struct lpfc_hba *phba,
+ struct list_head *nblist,
+ int count)
+{
+ struct lpfc_nvme_buf *lpfc_ncmd;
+ struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+ struct sgl_page_pairs *sgl_pg_pairs;
+ void *viraddr;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t reqlen, alloclen, pg_pairs;
+ uint32_t mbox_tmo;
+ uint16_t xritag_start = 0;
+ int rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ dma_addr_t pdma_phys_bpl1;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* Calculate the requested length of the dma memory */
+ reqlen = count * sizeof(struct sgl_page_pairs) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ if (reqlen > SLI4_PAGE_SIZE) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "6118 Block sgl registration required DMA "
+ "size (%d) great than a page\n", reqlen);
+ return -ENOMEM;
+ }
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6119 Failed to allocate mbox cmd memory\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate DMA memory and set up the non-embedded mailbox command */
+ alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6120 Allocated DMA memory size (%d) is "
+ "less than the requested DMA memory "
+ "size (%d)\n", alloclen, reqlen);
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory */
+ viraddr = mbox->sge_array->addr[0];
+
+ /* Set up the SGL pages in the non-embedded DMA pages */
+ sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+ sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+ pg_pairs = 0;
+ list_for_each_entry(lpfc_ncmd, nblist, list) {
+ /* Set up the sge entry */
+ sgl_pg_pairs->sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
+ sgl_pg_pairs->sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
+ SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ sgl_pg_pairs->sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+ sgl_pg_pairs->sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+ /* Keep the first xritag on the list */
+ if (pg_pairs == 0)
+ xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
+ sgl_pg_pairs++;
+ pg_pairs++;
+ }
+ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+ /* Perform endian conversion if necessary */
+ sgl->word0 = cpu_to_le32(sgl->word0);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "6125 POST_SGL_BLOCK mailbox command failed "
+ "status x%x add_status x%x mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_post_nvme_sgl_list - Post blocks of nvme buffer sgls from a list
+ * @phba: pointer to lpfc hba data structure.
+ * @post_nblist: pointer to the nvme buffer list.
+ *
+ * This routine walks a list of nvme buffers that was passed in. It attempts
+ * to construct blocks of nvme buffer sgls which contains contiguous xris and
+ * uses the non-embedded SGL block post mailbox commands to post to the port.
+ * For single NVME buffer sgl with non-contiguous xri, if any, it shall use
+ * embedded SGL post mailbox command for posting. The @post_nblist passed in
+ * must be local list, thus no lock is needed when manipulate the list.
+ *
+ * Returns: 0 = failure, non-zero number of successfully posted buffers.
+ **/
+static int
+lpfc_post_nvme_sgl_list(struct lpfc_hba *phba,
+ struct list_head *post_nblist, int sb_count)
+{
+ struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
+ int status, sgl_size;
+ int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
+ dma_addr_t pdma_phys_sgl1;
+ int last_xritag = NO_XRI;
+ int cur_xritag;
+ LIST_HEAD(prep_nblist);
+ LIST_HEAD(blck_nblist);
+ LIST_HEAD(nvme_nblist);
+
+ /* sanity check */
+ if (sb_count <= 0)
+ return -EINVAL;
+
+ sgl_size = phba->cfg_sg_dma_buf_size;
+
+ list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
+ list_del_init(&lpfc_ncmd->list);
+ block_cnt++;
+ if ((last_xritag != NO_XRI) &&
+ (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
+ /* a hole in xri block, form a sgl posting block */
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt - 1;
+ /* prepare list for next posting block */
+ list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+ block_cnt = 1;
+ } else {
+ /* prepare list for next posting block */
+ list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+ /* enough sgls for non-embed sgl mbox command */
+ if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt;
+ block_cnt = 0;
+ }
+ }
+ num_posting++;
+ last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+
+ /* end of repost sgl list condition for NVME buffers */
+ if (num_posting == sb_count) {
+ if (post_cnt == 0) {
+ /* last sgl posting block */
+ list_splice_init(&prep_nblist, &blck_nblist);
+ post_cnt = block_cnt;
+ } else if (block_cnt == 1) {
+ /* last single sgl with non-contiguous xri */
+ if (sgl_size > SGL_PAGE_SIZE)
+ pdma_phys_sgl1 =
+ lpfc_ncmd->dma_phys_sgl +
+ SGL_PAGE_SIZE;
+ else
+ pdma_phys_sgl1 = 0;
+ cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+ status = lpfc_sli4_post_sgl(phba,
+ lpfc_ncmd->dma_phys_sgl,
+ pdma_phys_sgl1, cur_xritag);
+ if (status) {
+ /* failure, put on abort nvme list */
+ lpfc_ncmd->exch_busy = 1;
+ } else {
+ /* success, put on NVME buffer list */
+ lpfc_ncmd->exch_busy = 0;
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ /* success, put on NVME buffer sgl list */
+ list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+ }
+ }
+
+ /* continue until a nembed page worth of sgls */
+ if (post_cnt == 0)
+ continue;
+
+ /* post block of NVME buffer list sgls */
+ status = lpfc_sli4_post_nvme_sgl_block(phba, &blck_nblist,
+ post_cnt);
+
+ /* don't reset xirtag due to hole in xri block */
+ if (block_cnt == 0)
+ last_xritag = NO_XRI;
+
+ /* reset NVME buffer post count for next round of posting */
+ post_cnt = 0;
+
+ /* put posted NVME buffer-sgl posted on NVME buffer sgl list */
+ while (!list_empty(&blck_nblist)) {
+ list_remove_head(&blck_nblist, lpfc_ncmd,
+ struct lpfc_nvme_buf, list);
+ if (status) {
+ /* failure, put on abort nvme list */
+ lpfc_ncmd->exch_busy = 1;
+ } else {
+ /* success, put on NVME buffer list */
+ lpfc_ncmd->exch_busy = 0;
+ lpfc_ncmd->status = IOSTAT_SUCCESS;
+ num_posted++;
+ }
+ list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+ }
+ }
+ /* Push NVME buffers with sgl posted to the available list */
+ while (!list_empty(&nvme_nblist)) {
+ list_remove_head(&nvme_nblist, lpfc_ncmd,
+ struct lpfc_nvme_buf, list);
+ lpfc_release_nvme_buf(phba, lpfc_ncmd);
+ }
+ return num_posted;
+}
+
+/**
+ * lpfc_repost_nvme_sgl_list - Repost all the allocated nvme buffer sgls
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of nvme buffers that have been allocated and
+ * repost them to the port by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
+ * to the lpfc_nvme_buf_list. If the repost fails, reject all nvme buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba)
+{
+ LIST_HEAD(post_nblist);
+ int num_posted, rc = 0;
+
+ /* get all NVME buffers need to repost to a local list */
+ spin_lock_irq(&phba->nvme_buf_list_get_lock);
+ spin_lock(&phba->nvme_buf_list_put_lock);
+ list_splice_init(&phba->lpfc_nvme_buf_list_get, &post_nblist);
+ list_splice(&phba->lpfc_nvme_buf_list_put, &post_nblist);
+ spin_unlock(&phba->nvme_buf_list_put_lock);
+ spin_unlock_irq(&phba->nvme_buf_list_get_lock);
+
+ /* post the list of nvme buffer sgls to port if available */
+ if (!list_empty(&post_nblist)) {
+ num_posted = lpfc_post_nvme_sgl_list(phba, &post_nblist,
+ phba->sli4_hba.nvme_xri_cnt);
+ /* failed to post any nvme buffer, return error */
+ if (num_posted == 0)
+ rc = -EIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_new_nvme_buf - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates nvme buffers for device with SLI-4 interface spec,
+ * the nvme buffer contains all the necessary information needed to initiate
+ * a NVME I/O. After allocating up to @num_to_allocate NVME buffers and put
+ * them on a list, it post them to the port by using SGL block post.
+ *
+ * Return codes:
+ * int - number of nvme buffers that were allocated and posted.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_nvme_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_nvme_buf *lpfc_ncmd;
+ struct lpfc_iocbq *pwqeq;
+ union lpfc_wqe128 *wqe;
+ struct sli4_sge *sgl;
+ dma_addr_t pdma_phys_sgl;
+ uint16_t iotag, lxri = 0;
+ int bcnt, num_posted, sgl_size;
+ LIST_HEAD(prep_nblist);
+ LIST_HEAD(post_nblist);
+ LIST_HEAD(nvme_nblist);
+
+ sgl_size = phba->cfg_sg_dma_buf_size;
+
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ lpfc_ncmd = kzalloc(sizeof(struct lpfc_nvme_buf), GFP_KERNEL);
+ if (!lpfc_ncmd)
+ break;
+ /*
+ * Get memory from the pci pool to map the virt space to
+ * pci bus space for an I/O. The DMA buffer includes the
+ * number of SGE's necessary to support the sg_tablesize.
+ */
+ lpfc_ncmd->data = pci_pool_alloc(phba->lpfc_sg_dma_buf_pool,
+ GFP_KERNEL,
+ &lpfc_ncmd->dma_handle);
+ if (!lpfc_ncmd->data) {
+ kfree(lpfc_ncmd);
+ break;
+ }
+ memset(lpfc_ncmd->data, 0, phba->cfg_sg_dma_buf_size);
+
+ lxri = lpfc_sli4_next_xritag(phba);
+ if (lxri == NO_XRI) {
+ pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ lpfc_ncmd->data, lpfc_ncmd->dma_handle);
+ kfree(lpfc_ncmd);
+ break;
+ }
+ pwqeq = &(lpfc_ncmd->cur_iocbq);
+ wqe = (union lpfc_wqe128 *)&pwqeq->wqe;
+
+ /* Allocate iotag for lpfc_ncmd->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, pwqeq);
+ if (iotag == 0) {
+ pci_pool_free(phba->lpfc_sg_dma_buf_pool,
+ lpfc_ncmd->data, lpfc_ncmd->dma_handle);
+ kfree(lpfc_ncmd);
+ lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
+ "6121 Failed to allocated IOTAG for"
+ " XRI:0x%x\n", lxri);
+ lpfc_sli4_free_xri(phba, lxri);
+ break;
+ }
+ pwqeq->sli4_lxritag = lxri;
+ pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
+ pwqeq->iocb_flag |= LPFC_IO_NVME;
+ pwqeq->context1 = lpfc_ncmd;
+ pwqeq->wqe_cmpl = lpfc_nvme_io_cmd_wqe_cmpl;
+
+ /* Initialize local short-hand pointers. */
+ lpfc_ncmd->nvme_sgl = lpfc_ncmd->data;
+ sgl = lpfc_ncmd->nvme_sgl;
+ pdma_phys_sgl = lpfc_ncmd->dma_handle;
+ lpfc_ncmd->dma_phys_sgl = pdma_phys_sgl;
+
+ /* Rsp SGE will be filled in when we rcv an IO
+ * from the NVME Layer to be sent.
+ * The cmd is going to be embedded so we need a SKIP SGE.
+ */
+ bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_SKIP);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ /* Fill in word 3 / sgl_len during cmd submission */
+
+ lpfc_ncmd->cur_iocbq.context1 = lpfc_ncmd;
+
+ /* Word 7 */
+ bf_set(wqe_erp, &wqe->generic.wqe_com, 0);
+ /* NVME upper layers will time things out, if needed */
+ bf_set(wqe_tmo, &wqe->generic.wqe_com, 0);
+
+ /* Word 10 */
+ bf_set(wqe_ebde_cnt, &wqe->generic.wqe_com, 0);
+ bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
+
+ /* add the nvme buffer to a post list */
+ list_add_tail(&lpfc_ncmd->list, &post_nblist);
+ spin_lock_irq(&phba->nvme_buf_list_get_lock);
+ phba->sli4_hba.nvme_xri_cnt++;
+ spin_unlock_irq(&phba->nvme_buf_list_get_lock);
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
+ "6114 Allocate %d out of %d requested new NVME "
+ "buffers\n", bcnt, num_to_alloc);
+
+ /* post the list of nvme buffer sgls to port if available */
+ if (!list_empty(&post_nblist))
+ num_posted = lpfc_post_nvme_sgl_list(phba,
+ &post_nblist, bcnt);
+ else
+ num_posted = 0;
+
+ return num_posted;
+}
+
+/**
+ * lpfc_get_nvme_buf - Get a nvme buffer from lpfc_nvme_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
+ *
+ * This routine removes a nvme buffer from head of @phba lpfc_nvme_buf_list
list
+ * and returns to caller.
+ *
+ * Return codes:
+ * NULL - Error
+ * Pointer to lpfc_nvme_buf - Success
+ **/
+static struct lpfc_nvme_buf *
+lpfc_get_nvme_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
+{
+ struct lpfc_nvme_buf *lpfc_ncmd, *lpfc_ncmd_next;
+ unsigned long iflag = 0;
+ int found = 0;
+
+ spin_lock_irqsave(&phba->nvme_buf_list_get_lock, iflag);
+ list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
+ &phba->lpfc_nvme_buf_list_get, list) {
+ if (lpfc_test_rrq_active(phba, ndlp,
+ lpfc_ncmd->cur_iocbq.sli4_lxritag))
+ continue;
+ list_del(&lpfc_ncmd->list);
+ found = 1;
+ break;
+ }
+ if (!found) {
+ spin_lock(&phba->nvme_buf_list_put_lock);
+ list_splice(&phba->lpfc_nvme_buf_list_put,
+ &phba->lpfc_nvme_buf_list_get);
+ INIT_LIST_HEAD(&phba->lpfc_nvme_buf_list_put);
+ spin_unlock(&phba->nvme_buf_list_put_lock);
+ list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
+ &phba->lpfc_nvme_buf_list_get, list) {
+ if (lpfc_test_rrq_active(
+ phba, ndlp, lpfc_ncmd->cur_iocbq.sli4_lxritag))
+ continue;
+ list_del(&lpfc_ncmd->list);
+ found = 1;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&phba->nvme_buf_list_get_lock, iflag);
+ if (!found)
+ return NULL;
+ return lpfc_ncmd;
+}
+
+/**
+ * lpfc_release_nvme_buf: Return a nvme buffer back to hba nvme buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_ncmd: The nvme buffer which is being released.
+ *
+ * This routine releases @lpfc_ncmd nvme buffer by adding it to tail of @phba
+ * lpfc_nvme_buf_list list. For SLI4 XRI's are tied to the nvme buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_nvme_buf(struct lpfc_hba *phba, struct lpfc_nvme_buf *lpfc_ncmd)
+{
+ unsigned long iflag = 0;
+
+ lpfc_ncmd->nonsg_phys = 0;
+ if (lpfc_ncmd->exch_busy) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_nvme_buf_list_lock,
+ iflag);
+ lpfc_ncmd->nvmeCmd = NULL;
+ list_add_tail(&lpfc_ncmd->list,
+ &phba->sli4_hba.lpfc_abts_nvme_buf_list);
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_nvme_buf_list_lock,
+ iflag);
+ } else {
+ lpfc_ncmd->nvmeCmd = NULL;
+ lpfc_ncmd->cur_iocbq.iocb_flag = LPFC_IO_NVME;
+ spin_lock_irqsave(&phba->nvme_buf_list_put_lock, iflag);
+ list_add_tail(&lpfc_ncmd->list, &phba->lpfc_nvme_buf_list_put);
+ spin_unlock_irqrestore(&phba->nvme_buf_list_put_lock, iflag);
+ }
+}
+
+/**
+ * lpfc_nvme_create_localport - Create/Bind an nvme localport instance.
+ * @pvport - the lpfc_vport instance requesting a localport.
+ *
+ * This routine is invoked to create an nvme localport instance to bind
+ * to the nvme_fc_transport. It is called once during driver load
+ * like lpfc_create_shost after all other services are initialized.
+ * It requires a vport, vpi, and wwns at call time. Other localport
+ * parameters are modified as the driver's FCID and the Fabric WWN
+ * are established.
+ *
+ * Return codes
+ * 0 - successful
+ * -ENOMEM - no heap memory available
+ * other values - from nvme registration upcall
+ **/
+int
+lpfc_nvme_create_localport(struct lpfc_vport *vport)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct nvme_fc_port_info nfcp_info;
+ struct nvme_fc_local_port *localport;
+ struct lpfc_nvme_lport *lport;
+ int len, ret = 0;
+
+ /* Initialize this localport instance. The vport wwn usage ensures
+ * that NPIV is accounted for.
+ */
+ memset(&nfcp_info, 0, sizeof(struct nvme_fc_port_info));
+ nfcp_info.port_role = FC_PORT_ROLE_NVME_INITIATOR;
+ nfcp_info.node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
+ nfcp_info.port_name = wwn_to_u64(vport->fc_portname.u.wwn);
+
+ /* For now need + 1 to get around NVME transport logic */
+ lpfc_nvme_template.max_sgl_segments = phba->cfg_sg_seg_cnt + 1;
+ lpfc_nvme_template.max_hw_queues = phba->cfg_nvme_max_hw_queue;
+
+ /* localport is allocated from the stack, but the registration
+ * call allocates heap memory as well as the private area.
+ */
+ ret = nvme_fc_register_localport(&nfcp_info, &lpfc_nvme_template,
+ &vport->phba->pcidev->dev, &localport);
+ if (!ret) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME | LOG_NVME_DISC,
+ "6005 Successfully registered local "
+ "NVME port num %d, localP %p, private %p, "
+ "sg_seg %d\n",
+ localport->port_num, localport,
+ localport->private,
+ lpfc_nvme_template.max_sgl_segments);
+
+ /* Private is our lport size declared in the template. */
+ lport = (struct lpfc_nvme_lport *)localport->private;
+ vport->localport = localport;
+ lport->vport = vport;
+ INIT_LIST_HEAD(&lport->rport_list);
+ vport->nvmei_support = 1;
+ }
+
+ len = lpfc_new_nvme_buf(vport, phba->cfg_nvme_posted_buf);
+ vport->phba->total_nvme_bufs += len;
+ return ret;
+}
+
+/**
+ * lpfc_nvme_destroy_localport - Destroy lpfc_nvme bound to nvme transport.
+ * @pnvme: pointer to lpfc nvme data structure.
+ *
+ * This routine is invoked to destroy all lports bound to the phba.
+ * The lport memory was allocated by the nvme fc transport and is
+ * released there. This routine ensures all rports bound to the
+ * lport have been disconnected.
+ *
+ **/
+void
+lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
+{
+ struct nvme_fc_local_port *localport;
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_nvme_rport *rport;
+ int ret;
+
+ if (vport->nvmei_support == 0)
+ return;
+
+ localport = vport->localport;
+ vport->localport = NULL;
+ lport = (struct lpfc_nvme_lport *)localport->private;
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
+ "6011 Destroying NVME localport %p\n",
+ localport);
+
+ list_for_each_entry(rport, &lport->rport_list, list) {
+ init_completion(&rport->rport_unreg_done);
+ ret = nvme_fc_unregister_remoteport(rport->remoteport);
+ if (ret)
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_DISC,
+ "6008 rport fail destroy %x\n", ret);
+ wait_for_completion(&rport->rport_unreg_done);
+ }
+ /* lport's rport list is clear. Unregister
+ * lport and release resources.
+ */
+ init_completion(&lport->lport_unreg_done);
+ ret = nvme_fc_unregister_localport(localport);
+ wait_for_completion(&lport->lport_unreg_done);
+
+ /* Regardless of the unregister upcall response, clear
+ * nvmei_support. All rports are unregistered and the
+ * driver will clean up.
+ */
+ vport->nvmei_support = 0;
+ if (ret == 0) {
+ lpfc_printf_vlog(vport,
+ KERN_INFO, LOG_NVME_DISC,
+ "6009 Unregistered lport Success\n");
+ } else {
+ lpfc_printf_vlog(vport,
+ KERN_INFO, LOG_NVME_DISC,
+ "6010 Unregistered lport "
+ "Failed, status x%x\n",
+ ret);
+ }
+}
+
+void
+lpfc_nvme_update_localport(struct lpfc_vport *vport)
+{
+ struct nvme_fc_local_port *localport;
+ struct lpfc_nvme_lport *lport;
+
+ localport = vport->localport;
+ lport = (struct lpfc_nvme_lport *)localport->private;
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
+ "6012 Update NVME lport %p did x%x\n",
+ localport, vport->fc_myDID);
+
+ localport->port_id = vport->fc_myDID;
+ if (localport->port_id == 0)
+ localport->port_role = FC_PORT_ROLE_NVME_DISCOVERY;
+ else
+ localport->port_role = FC_PORT_ROLE_NVME_INITIATOR;
+
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
+ "6030 bound lport %p to DID x%06x\n",
+ lport, localport->port_id);
+
+}
+
+int
+lpfc_nvme_register_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
+{
+ int ret = 0;
+ struct nvme_fc_local_port *localport;
+ struct lpfc_nvme_lport *lport;
+ struct lpfc_nvme_rport *rport;
+ struct nvme_fc_remote_port *remote_port;
+ struct nvme_fc_port_info rpinfo;
+
+ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
+ "6006 Register NVME PORT. DID x%06x nlptype x%x\n",
+ ndlp->nlp_DID, ndlp->nlp_type);
+
+ localport = vport->localport;
+ lport = (struct lpfc_nvme_lport *)localport->private;
+
+ if (ndlp->nlp_type & (NLP_NVME_TARGET | NLP_NVME_INITIATOR)) {
+
+ /* The driver isn't expecting the rport wwn to change
+ * but it might get a different DID on a different
+ * fabric.
+ */
+ list_for_each_entry(rport, &lport->rport_list, list) {
+ if (rport->remoteport->port_name !=
+ wwn_to_u64(ndlp->nlp_portname.u.wwn))
+ continue;
+ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NVME_DISC,
+ "6035 lport %p, found matching rport "
+ "at wwpn 0x%llx, Data: x%x x%x x%x "
+ "x%06x\n",
+ lport,
+ rport->remoteport->port_name,
+ rport->remoteport->port_id,
+ rport->remoteport->port_role,
+ ndlp->nlp_type,
+ ndlp->nlp_DID);
+ remote_port = rport->remoteport;
+ if ((remote_port->port_id == 0) &&
+ (remote_port->port_role ==
+ FC_PORT_ROLE_NVME_DISCOVERY)) {
+ remote_port->port_id = ndlp->nlp_DID;
+ remote_port->port_role &=
+ ~FC_PORT_ROLE_NVME_DISCOVERY;
+ if (ndlp->nlp_type & NLP_NVME_TARGET)
+ remote_port->port_role |=
+ FC_PORT_ROLE_NVME_TARGET;
+ if (ndlp->nlp_type & NLP_NVME_INITIATOR)
+ remote_port->port_role |=
+ FC_PORT_ROLE_NVME_INITIATOR;
+
+ lpfc_printf_vlog(ndlp->vport, KERN_INFO,
+ LOG_NVME_DISC,
+ "6014 Rebinding lport to "
+ "rport wwpn 0x%llx, "
+ "Data: x%x x%x x%x x%06x\n",
+ remote_port->port_name,
+ remote_port->port_id,
+ remote_port->port_role,
+ ndlp->nlp_type,
+ ndlp->nlp_DID);
+ }
+ return 0;
+ }
+
+ /* NVME rports are not preserved across devloss.
+ * Just register this instance.
+ */
+ rpinfo.port_id = ndlp->nlp_DID;
+ rpinfo.port_role = 0;
+ if (ndlp->nlp_type & NLP_NVME_TARGET)
+ rpinfo.port_role |= FC_PORT_ROLE_NVME_TARGET;
+ if (ndlp->nlp_type & NLP_NVME_INITIATOR)
+ rpinfo.port_role |= FC_PORT_ROLE_NVME_INITIATOR;
+ rpinfo.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
+ rpinfo.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
+
+ ret = nvme_fc_register_remoteport(localport, &rpinfo,
+ &remote_port);
+ if (!ret) {
+ rport = remote_port->private;
+ rport->remoteport = remote_port;
+ rport->lport = lport;
+ rport->ndlp = lpfc_nlp_get(ndlp);
+ if (!rport->ndlp)
+ return -1;
+ ndlp->nrport = rport;
+ INIT_LIST_HEAD(&rport->list);
+ list_add_tail(&rport->list, &lport->rport_list);
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_NVME_DISC | LOG_NODE,
+ "6022 Binding new rport to lport %p "
+ "Rport WWNN 0x%llx, Rport WWPN 0x%llx "
+ "DID x%06x Role x%x\n",
+ lport,
+ rpinfo.node_name, rpinfo.port_name,
+ rpinfo.port_id, rpinfo.port_role);
+ } else {
+ lpfc_printf_vlog(vport, KERN_ERR,
+ LOG_NVME_DISC | LOG_NODE,
+ "6031 RemotePort Registration failed "
+ "err: %d, DID x%06x\n",
+ ret, ndlp->nlp_DID);
+ }
+ } else {
+ ret = -EINVAL;
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME_DISC,
+ "6027 Unknown nlp_type x%x on DID x%06x "
+ "ndlp %p. Not Registering nvme rport\n",
+ ndlp->nlp_type, ndlp->nlp_DID, ndlp);
+ }
+ return ret;
+}
+
+/* lpfc_nvme_unregister_port - unbind the DID and port_role from this rport.
+ *
+ * There is no notion of Devloss or rport recovery from the current
+ * nvme_transport perspective. Loss of an rport just means IO cannot
+ * be sent and recovery is completely up to the initator.
+ * For now, the driver just unbinds the DID and port_role so that
+ * no further IO can be issued. Changes are planned for later.
+ *
+ * Notes - the ndlp reference count is not decremented here since
+ * since there is no nvme_transport api for devloss. Node ref count
+ * is only adjusted in driver unload.
+ */
+void
+lpfc_nvme_unregister_port(struct lpfc_nodelist *ndlp)
+{
+ struct lpfc_vport *vport = ndlp->vport;
+ struct nvme_fc_local_port *localport = NULL;
+ struct lpfc_nvme_lport *lport = NULL;
+ struct lpfc_nvme_rport *rport = NULL;
+
+ localport = vport->localport;
+ lport = (struct lpfc_nvme_lport *)localport->private;
+
+ if (ndlp->nlp_type & (NLP_NVME_TARGET | NLP_NVME_INITIATOR)) {
+ /* The rports are not expected to change WWNs but
+ * but the port_id and fabric name could be different
+ * during recovery. For NPIV-based rports that do
+ * recover with new WWNs, a new rport should get
+ * registered and added to the nvme_transport.
+ */
+
+ list_for_each_entry(rport, &lport->rport_list, list) {
+ if (rport->remoteport->port_name !=
+ wwn_to_u64(ndlp->nlp_portname.u.wwn))
+ continue;
+
+ rport->remoteport->port_id = 0;
+ rport->remoteport->port_role =
+ FC_PORT_ROLE_NVME_DISCOVERY;
+ lpfc_printf_vlog(vport,
+ KERN_INFO, LOG_NVME_DISC,
+ "6033 Unreg rport %p DID x%06x\n",
+ rport, ndlp->nlp_DID);
+ }
+ }
+}
diff --git a/drivers/scsi/lpfc/lpfc_nvme.h b/drivers/scsi/lpfc/lpfc_nvme.h
index b5d9504..6e44950 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.h
+++ b/drivers/scsi/lpfc/lpfc_nvme.h
@@ -28,6 +28,12 @@
#define LPFC_NVME_ERSP_LEN 0x20
+struct lpfc_nvme_qhandle {
+ uint32_t index; /* WQ index to use */
+ uint32_t qidx; /* queue index passed to create */
+ uint32_t cpu_id; /* current cpu id at time of create */
+};
+
/* Declare nvme-based local and remote port definitions. */
struct lpfc_nvme_lport {
struct lpfc_vport *vport;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 076810d..446b6f5 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6807,6 +6807,22 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
}
}
+ if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
+ (phba->nvmet_support == 0)) {
+
+ /* register the allocated nvme sgl pool to the port */
+ rc = lpfc_repost_nvme_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "6116 Error %d during nvme sgl post "
+ "operation\n", rc);
+ /* Some NVME buffers were moved to abort nvme list */
+ /* A pci function reset will repost them */
+ rc = -ENODEV;
+ goto out_destroy_queue;
+ }
+ }
+
/* Post the rpi header region to the device. */
rc = lpfc_sli4_post_all_rpi_hdrs(phba);
if (unlikely(rc)) {
@@ -10514,10 +10530,7 @@ lpfc_sli4_abort_nvme_io(struct lpfc_hba *phba, struct
lpfc_sli_ring *pring,
/* ABTS WQE must go to the same WQ as the WQE to be aborted */
abtsiocbp->iocb_flag |= LPFC_IO_NVME;
abtsiocbp->vport = vport;
- /* todo: assign wqe_cmpl to lpfc_nvme_abort_fcreq_cmpl
- * subsequent patch will add routine. For now, just skip assignment
- * as won't ever be called.
- */
+ abtsiocbp->wqe_cmpl = lpfc_nvme_abort_fcreq_cmpl;
retval = lpfc_sli4_issue_wqe(phba, LPFC_FCP_RING, abtsiocbp);
if (retval == IOCB_ERROR) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME,
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 0a56fc6..0bfb61d 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -754,6 +754,7 @@ int lpfc_sli4_queue_setup(struct lpfc_hba *);
void lpfc_sli4_queue_unset(struct lpfc_hba *);
int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_repost_nvme_sgl_list(struct lpfc_hba *phba);
uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
void lpfc_sli4_free_xri(struct lpfc_hba *, int);
int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 07c7c5f..b0d94f2 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -403,7 +403,21 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
vport->fdmi_port_mask = phba->pport->fdmi_port_mask;
}
- /* todo: init: register port with nvme */
+ if ((phba->nvmet_support == 0) &&
+ ((phba->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
+ (phba->cfg_enable_fc4_type == LPFC_ENABLE_NVME))) {
+ /* Create NVME binding with nvme_fc_transport. This
+ * ensures the vport is initialized.
+ */
+ rc = lpfc_nvme_create_localport(vport);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "6003 %s status x%x\n",
+ "NVME registration failed, ",
+ rc);
+ goto error_out;
+ }
+ }
/*
* In SLI4, the vpi must be activated before it can be used
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
