----- Original Message ----- > From: "Laurence Oberman" <lober...@redhat.com> > To: "Himanshu Madhani" <himanshu.madh...@cavium.com> > Cc: "Chad Dupuis" <chad.dup...@cavium.com>, "Linux SCSI List" > <linux-scsi@vger.kernel.org> > Sent: Tuesday, March 14, 2017 8:02:32 PM > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based 8Gb) > with BAR 3 error, work fine on 4.9 > > > > ----- Original Message ----- > > From: "Himanshu Madhani" <himanshu.madh...@cavium.com> > > To: "Laurence Oberman" <lober...@redhat.com> > > Cc: "Chad Dupuis" <chad.dup...@cavium.com>, "Linux SCSI List" > > <linux-scsi@vger.kernel.org> > > Sent: Tuesday, March 14, 2017 5:11:13 PM > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based > > 8Gb) with BAR 3 error, work fine on 4.9 > > > > > > ----- Original Message ----- > > > From: "Laurence Oberman" <lober...@redhat.com> > > > To: "Himanshu Madhani" <himanshu.madh...@cavium.com> > > > Cc: "Chad Dupuis" <chad.dup...@cavium.com>, "Linux SCSI List" > > > <linux-scsi@vger.kernel.org> > > > Sent: Monday, March 13, 2017 9:06:38 PM > > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx > > > (ISP2532-based > > > 8Gb) with BAR 3 error, work fine on 4.9 > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Laurence Oberman" <lober...@redhat.com> > > > > To: "Himanshu Madhani" <himanshu.madh...@cavium.com> > > > > Cc: "Chad Dupuis" <chad.dup...@cavium.com>, "Linux SCSI List" > > > > <linux-scsi@vger.kernel.org> > > > > Sent: Monday, March 13, 2017 12:54:12 PM > > > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx > > > > (ISP2532-based > > > > 8Gb) with BAR 3 error, work fine on 4.9 > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Himanshu Madhani" <himanshu.madh...@cavium.com> > > > > > To: "Laurence Oberman" <lober...@redhat.com>, "Chad Dupuis" > > > > > <chad.dup...@cavium.com> > > > > > Cc: "Linux SCSI List" <linux-scsi@vger.kernel.org> > > > > > Sent: Monday, March 13, 2017 12:39:03 PM > > > > > Subject: RE: 4.10+ qla2xxx driver wont load for qla2xxx > > > > > (ISP2532-based > > > > > 8Gb) with BAR 3 error, work fine on 4.9 > > > > > > > > > > Hi Laurence, > > > > > > > > > > > -----Original Message----- > > > > > > From: Laurence Oberman [mailto:lober...@redhat.com] > > > > > > Sent: Sunday, March 12, 2017 11:31 AM > > > > > > To: Dupuis, Chad <chad.dup...@cavium.com>; Madhani, Himanshu > > > > > > <himanshu.madh...@cavium.com> > > > > > > Cc: Linux SCSI List <linux-scsi@vger.kernel.org> > > > > > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx > > > > > > (ISP2532-based > > > > > > 8Gb) > > > > > > with BAR 3 error, work fine on 4.9 > > > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Laurence Oberman" <lober...@redhat.com> > > > > > > > To: "Chad Dupuis" <chad.dup...@cavium.com>, "Himanshu > > > > > > > Madhani" > > > > > > > <himanshu.madh...@cavium.com> > > > > > > > Cc: "Linux SCSI List" <linux-scsi@vger.kernel.org> > > > > > > > Sent: Sunday, March 12, 2017 7:39:23 AM > > > > > > > Subject: 4.10+ qla2xxx driver wont load for qla2xxx > > > > > > > (ISP2532-based > > > > > > > 8Gb) with BAR 3 error, work fine on 4.9 > > > > > > > > > > > > > > Chad, Himanshu > > > > > > > > > > > > > > Before I bisect or go chase changes, wanted to reach out > > > > > > > because the > > > > > > > driver seems to be the same version. > > > > > > > Perhaps this is a PCIE change in the kernel for 4.10 > > > > > > > affecting > > > > > > > the > > > > > > > load. > > > > > > > Its the same targetLIO server I have been using for a long > > > > > > > time > > > > > > > with > > > > > > > 4.9 > > > > > > > > > > > > > > 27:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre > > > > > > > Channel > > > > > > > to > > > > > > > PCI Express HBA (rev 02) > > > > > > > > > > > > > > With 4.9 I have no issues loading the driver for my targetLIO > > > > > > > server. > > > > > > > (DL380G8) > > > > > > > > > > > > > > # modinfo qla2xxx | more > > > > > > > filename: > > > > > > > > > /lib/modules/4.9.0.lobetcm+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko > > > > > > > firmware: ql2500_fw.bin > > > > > > > version: 8.07.00.38-k > > > > > > > license: GPL > > > > > > > description: QLogic Fibre Channel HBA Driver > > > > > > > author: QLogic Corporation > > > > > > > srcversion: 94A8431A85BFF854B97B02D > > > > > > > > > > > > > > [ 8.906351] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre > > > > > > > Channel > > > > > > > HBA > > > > > > > Driver: 8.07.00.38-k. > > > > > > > [ 10.014052] qla2xxx [0000:27:00.0]-001d: : Found an > > > > > > > ISP2532 > > > > > > > irq > > > > > > > 106 > > > > > > > iobase > > > > > > > 0xffffadce989a1000. > > > > > > > [ 10.455108] scsi host4: qla2xxx > > > > > > > [ 10.460206] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562 > > > > > > > - > > > > > > > PCI-Express > > > > > > > Dual Channel 8Gb Fibre Channel HBA. > > > > > > > [ 10.460215] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe > > > > > > > (5.0GT/s > > > > > > > x8) > > > > > > > @ > > > > > > > 0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5). > > > > > > > [ 10.460545] qla2xxx [0000:27:00.1]-001d: : Found an > > > > > > > ISP2532 > > > > > > > irq > > > > > > > 110 > > > > > > > iobase > > > > > > > 0xffffadce989a9000. > > > > > > > [ 10.662120] scsi host5: qla2xxx > > > > > > > [ 11.007841] qla2xxx [0000:27:00.1]-00fb:5: QLogic QLE2562 > > > > > > > - > > > > > > > PCI-Express > > > > > > > Dual Channel 8Gb Fibre Channel HBA. > > > > > > > [ 11.007849] qla2xxx [0000:27:00.1]-00fc:5: ISP2532: PCIe > > > > > > > (5.0GT/s > > > > > > > x8) > > > > > > > @ > > > > > > > 0000:27:00.1 hdma+ host#=5 fw=8.03.00 (90d5). > > > > > > > > > > > > > > Rebooting on the same server with 4.10 fails to load > > > > > > > > > > > > > > Linux 4.10.0+ > > > > > > > # modinfo qla2xxx | more > > > > > > > filename: > > > > > > > /lib/modules/4.10.0+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko > > > > > > > firmware: ql2500_fw.bin > > > > > > > version: 8.07.00.38-k > > > > > > > license: GPL > > > > > > > description: QLogic Fibre Channel HBA Driver > > > > > > > author: QLogic Corporation > > > > > > > srcversion: 939E0595E8A3C2E1BE94392 > > > > > > > > > > > > > > [ 8.754040] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre > > > > > > > Channel > > > > > > > HBA > > > > > > > Driver: 8.07.00.38-k. > > > > > > > [ 9.979523] qla2xxx [0000:27:00.0]-001b: : BAR 3 not > > > > > > > enabled. > > > > > > > [ 10.201268] qla2xxx [0000:27:00.0]-001d: : Found an > > > > > > > ISP2532 > > > > > > > irq > > > > > > > 110 > > > > > > > iobase > > > > > > > 0xffffacbf189b1000. > > > > > > > [ 10.407865] scsi host5: qla2xxx > > > > > > > [ 10.444281] qla2xxx: probe of 0000:27:00.0 failed with > > > > > > > error > > > > > > > -22 > > > > > > > [ 10.444519] qla2xxx [0000:27:00.1]-001b: : BAR 3 not > > > > > > > enabled. > > > > > > > [ 10.444522] qla2xxx [0000:27:00.1]-001d: : Found an > > > > > > > ISP2532 > > > > > > > irq > > > > > > > 110 > > > > > > > iobase > > > > > > > 0xffffacbf189b9000. > > > > > > > [ 10.645932] scsi host5: qla2xxx > > > > > > > [ 10.682233] qla2xxx: probe of 0000:27:00.1 failed with > > > > > > > error > > > > > > > -22 > > > > > > > > > > > > > > Thanks > > > > > > > Laurence > > > > > > > > > > > > > > > > > > > I started bisecting this, cannot believe others have not bumped > > > > > > into > > > > > > this > > > > > > on > > > > > > 4.10. > > > > > > This is a generic QLE2562 and firmware is loaded by the driver > > > > > > so > > > > > > wondering > > > > > > why I am seeing this and other are not. > > > > > > There is nothing special with the PCIE bus on this DL380G8. > > > > > > > > > > > > Anyway during the bisect I got to a point where in the 4.10 > > > > > > commits I > > > > > > still > > > > > > saw > > > > > > the "BAR 3" message but the probe worked. > > > > > > > > > > > > [ 7.208237] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre > > > > > > Channel HBA > > > > > > Driver: > > > > > > 8.07.00.38-k. > > > > > > [ 7.208492] qla2xxx [0000:27:00.0]-001b: : BAR 3 not > > > > > > enabled. > > > > > > > > > > > > see this above but probe did not fail > > > > > > > > > > > > [ 7.208494] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 > > > > > > irq 97 > > > > > > iobase > > > > > > 0xffffc02f98989000. > > > > > > [ 7.414738] scsi host4: qla2xxx > > > > > > > > > > > > [ 7.419267] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562 - > > > > > > PCI-Express > > > > > > Dual > > > > > > Channel 8Gb Fibre Channel HBA. > > > > > > [ 7.419278] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe > > > > > > (5.0GT/s > > > > > > x8) > > > > > > @ > > > > > > 0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5). > > > > > > [ 7.419698] qla2xxx [0000:27:00.1]-001b: : BAR 3 not > > > > > > enabled. > > > > > > [ 7.419701] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 > > > > > > irq 100 > > > > > > iobase > > > > > > 0xffffc02f989b1000. > > > > > > [ 7.625691] scsi host6: qla2xxx > > > > > > [ 7.629218] qla2xxx [0000:27:00.1]-00fb:6: QLogic QLE2562 - > > > > > > PCI-Express > > > > > > Dual > > > > > > Channel 8Gb Fibre Channel HBA. > > > > > > [ 7.629222] qla2xxx [0000:27:00.1]-00fc:6: ISP2532: PCIe > > > > > > (5.0GT/s > > > > > > x8) > > > > > > @ > > > > > > 0000:27:00.1 hdma+ host#=6 > > > > > > > > > > > > I marked that still as bad and am continuing, I have 9 builds > > > > > > to > > > > > > go. > > > > > > > > > > > > Thanks > > > > > > Laurence > > > > > > > > > > We had send patches to address issues discovered when the PCI > > > > > Affinity > > > > > were > > > > > merged into 4.10 kernel. > > > > > > > > > > Can you please check if your tree has following patches > > > > > (Currently > > > > > they > > > > > are > > > > > included in 4.10.2 stable) > > > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c > > > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=699abe249b0e2ca590284424d95490e92ccd6aeb > > > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=cf9d9110806493e2ea2db7d00a1a991401dfb9d5 > > > > > > > > > > Also can you apply following patch which addresses issue in PCI > > > > > layer > > > > > (This > > > > > should be included in 4.10 stable branch soon ) > > > > > > > > > > https://www.spinics.net/lists/linux-pci/msg58742.html > > > > > > > > > > Thanks, > > > > > Himanshu > > > > > > > > > > > > > Hello Himanshu > > > > > > > > Many thanks for coming back to me. > > > > OK, I will test all of this and let you know. > > > > I dont think I have these and this would explain all this. > > > > > > > > Regards > > > > Laurence > > > > > > > > > > Hello Himanshu > > > This is still failing for me on the HP DL380G8 > > > > > > My Stable tree > > > > > > root@dhcp40-131 ~]# uname -a > > > Linux xxxxxx.desklab.eng.bos.redhat.com 4.11.0-rc2+ > > > > > > $ git show 154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c > > > commit 154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c > > > Author: Michael Hernandez <michael.hernan...@cavium.com> > > > Date: Wed Feb 15 15:37:21 2017 -0800 > > > > > > scsi: qla2xxx: Fix Regression introduced by > > > pci_alloc_irq_vectors_affinity call. > > > > > > commit 67f2db8792f96d8f7521461635d25f9c80245d80 upstream. > > > > > > For target mode, we need to increase minimum vectors value by one > > > to > > > account for ATIO queue. > > > > > > Following stack trace will be seen > > > > > > $ git show 699abe249b0e2ca590284424d95490e92ccd6aeb > > > commit 699abe249b0e2ca590284424d95490e92ccd6aeb > > > Author: Michael Hernandez <michael.hernan...@cavium.com> > > > Date: Wed Feb 15 15:37:20 2017 -0800 > > > > > > scsi: qla2xxx: Fix response queue count for Target mode. > > > > > > commit d0d2c68b759bbf678e078fd0c71b5fde65a9392c upstream. > > > > > > Target mode initialization was not calculating response queue > > > values > > > correctly resulting into one less MSI-X vector. > > > > > > $ git show cf9d9110806493e2ea2db7d00a1a991401dfb9d5 > > > commit cf9d9110806493e2ea2db7d00a1a991401dfb9d5 > > > Author: Michael Hernandez <michael.hernan...@cavium.com> > > > Date: Wed Feb 15 15:37:19 2017 -0800 > > > > > > scsi: qla2xxx: Cleaned up queue configuration code. > > > > > > commit f54f2cb540b53d55a81d620e816810d59be5cb1b upstream. > > > > > > This patch cleaned up queue configuration code, such that once > > > initialized, we should not touch msix_count value. This will > > > prevent > > > incorrect numbers of MSI-X vectors requested while performing > > > target > > > mode configuration. > > > > > > > > > Tested, and fails > > > > > > root@dhcp40-131 ~]# dmesg | grep qla > > > [ 8.007786] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel > > > HBA > > > Driver: 8.07.00.38-k. > > > [ 9.583949] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled. > > > [ 9.583951] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq > > > 106 > > > iobase > > > 0xffffb3e4589a1000. > > > [ 9.788259] scsi host4: qla2xxx > > > [ 9.824578] qla2xxx: probe of 0000:27:00.0 failed with error -22 > > > [ 9.824824] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled. > > > [ 9.824828] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq > > > 106 > > > iobase > > > 0xffffb3e4589a9000. > > > [ 10.030273] scsi host4: qla2xxx > > > [ 10.066602] qla2xxx: probe of 0000:27:00.1 failed with error -22 > > > > > > > > > Now > > > Patched > > > https://www.spinics.net/lists/linux-pci/msg58742.html > > > > > > [loberman@dhcp40-131 linux-stable]$ patch -p1 < ../patch_pci > > > patching file drivers/pci/msi.c > > > Hunk #1 succeeded at 1072 (offset -19 lines). > > > Hunk #2 succeeded at 1120 (offset -27 lines). > > > Hunk #3 succeeded at 1200 (offset -27 lines). > > > > > > Rebuild kernel > > > Reboot and test > > > > > > Still fails > > > > > > [ 8.464491] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel > > > HBA > > > Driver: 8.07.00.38-k. > > > [ 8.464672] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled. > > > [ 8.464675] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq > > > 101 > > > iobase > > > 0xffffa3ff58991000. > > > [ 8.670118] scsi host4: qla2xxx > > > [ 8.706325] qla2xxx: probe of 0000:27:00.0 failed with error -22 > > > [ 8.706451] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled. > > > [ 8.706453] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq > > > 101 > > > iobase > > > 0xffffa3ff589a1000. > > > [ 8.912089] scsi host4: qla2xxx > > > [ 8.948324] qla2xxx: probe of 0000:27:00.1 failed with error -22 > > > > > > Went to test on another system , HP Microserver G8 > > > Same HBA > > > Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI > > > Express > > > HBA (rev 02) > > > > > > Works here but complains about the vector count support > > > > > > [ 8.056438] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel > > > HBA > > > Driver: 8.07.00.38-k. > > > [ 8.097427] qla2xxx [0000:07:00.0]-001a: : MSI-X vector count: 32. > > > [ 8.127130] qla2xxx [0000:07:00.0]-001d: : Found an ISP2532 irq 16 > > > iobase > > > 0xffffbd9100c99000. > > > [ 8.221834] qla2xxx [0000:07:00.0]-00c6:6: MSI-X: Failed to enable > > > support > > > with 32 vectors, using 4 vectors. > > > [ 8.759660] scsi host6: qla2xxx > > > [ 8.760085] qla2xxx [0000:07:00.0]-00fb:6: QLogic HPAJ764A - HP > > > 8Gb > > > Dual > > > Channel PCI-e 2.0 FC HBA. > > > [ 8.760092] qla2xxx [0000:07:00.0]-00fc:6: ISP2532: PCIe (5.0GT/s > > > x8) @ > > > 0000:07:00.0 hdma+ host#=6 fw=8.03.00 (90d5). > > > [ 8.760197] qla2xxx [0000:07:00.1]-001a: : MSI-X vector count: 32. > > > [ 8.760199] qla2xxx [0000:07:00.1]-001d: : Found an ISP2532 irq 17 > > > iobase > > > 0xffffbd9100cb9000. > > > [ 8.760428] qla2xxx [0000:07:00.1]-00c6:7: MSI-X: Failed to enable > > > support > > > with 32 vectors, using 4 vectors. > > > [ 8.999658] scsi host7: qla2xxx > > > [ 9.000124] qla2xxx [0000:07:00.1]-00fb:7: QLogic HPAJ764A - HP > > > 8Gb > > > Dual > > > Channel PCI-e 2.0 FC HBA. > > > [ 9.000130] qla2xxx [0000:07:00.1]-00fc:7: ISP2532: PCIe (5.0GT/s > > > x8) @ > > > 0000:07:00.1 hdma+ host#=7 fw=8.03.00 (90d5). > > > > > > So something about the DL380 here needs to be figured out as well as > > > the > > > MSI-X messages above. > > > > > > Earlier kernels up to 4.9.13 are all fine on both servers > > > > > > Thanks > > > Laurence > > > > > > > I meant to add > > > > With the G8 Microserver links seem to come up with only the 4 MSI-X > > vectors but I get this > > so it not fully healthy > > > > [ 373.823667] Rounding down aligned max_sectors from 65535 to 65528 > > [ 399.994495] qla2xxx [0000:07:00.0]-00af:6: Performing ISP error > > recovery - ha=ffffa0e934210000. > > [ 400.728968] qla2xxx [0000:07:00.0]-500a:6: LOOP UP detected (8 > > Gbps). > > [ 401.473405] qla2xxx [0000:07:00.0]-5030:6: Error entry - invalid > > handle/queue (1c01). ***** Note > > [ 426.966519] qla2xxx [0000:07:00.1]-00af:7: Performing ISP error > > recovery - ha=ffffa0e934e30000. > > [ 427.697601] qla2xxx [0000:07:00.1]-500a:7: LOOP UP detected (8 > > Gbps). > > [ 428.473948] qla2xxx [0000:07:00.1]-5030:7: Error entry - invalid > > handle/queue (1c01). ***** Note > > > > I have tested the ISP2532 adapter on my DL380p G8 server and did not run > > into > > issue described. Can you share complete log with me. > > > > [ 615.007032] qla2xxx [0000:27:00.0]-4800:7: DPC handler sleeping. > > [ 615.124217] qla2xxx [0000:27:00.0]-00fb:7: QLogic QLE2562 - PCI-Express > > Dual Channel 8Gb Fibre Channel HBA. > > [ 615.124231] qla2xxx [0000:27:00.0]-00fc:7: ISP2532: PCIe (5.0GT/s x8) @ > > 0000:27:00.0 hdma+ host#=7 fw=8.06.02 (90d5). > > [ 615.196043] qla2xxx [0000:27:00.0]-580e:7: Asynchronous P2P MODE > > received. > > [ 615.235284] qla2xxx [0000:27:00.0]-480b:7: Reset marker scheduled. > > [ 615.235288] qla2xxx [0000:27:00.0]-480c:7: Reset marker end. > > [ 615.235291] qla2xxx [0000:27:00.0]-480f:7: Loop resync scheduled. > > [ 615.237903] qla2xxx [0000:27:00.0]-500a:7: LOOP UP detected (8 Gbps). > > [ 615.237945] qla2xxx [0000:27:00.0]-5812:7: Port database changed ffff > > 0006 > > 0000. > > [ 615.237948] qla2xxx [0000:27:00.0]-107ff:7: Mark all dev lost > > [ 615.760115] qla2xxx [0000:27:00.0]-8837:7: F/W Ready - OK. > > [ 615.760177] qla2xxx [0000:27:00.0]-883a:7: fw_state=3 (3, 0, 1e, 800 0) > > curr time=100013490. > > [ 615.760285] qla2xxx [0000:27:00.0]-280e:7: HBA in F P2P topology. > > [ 615.760304] qla2xxx [0000:27:00.0]-2814:7: Configure loop -- dpc flags = > > 0x152e0. > > [ 615.763509] qla2xxx [0000:27:00.0]-287d:7: NodeName = 20000024ff460a5c. > > [ 615.763514] qla2xxx [0000:27:00.0]-28a5:7: Manufacturer = QLogic > > Corporation. > > [ 615.763519] qla2xxx [0000:27:00.0]-28a6:7: Serial no. = BFD1230D31975. > > [ 615.763521] qla2xxx [0000:27:00.0]-28a7:7: Model Name = QLE2562. > > [ 615.763537] qla2xxx [0000:27:00.0]-28a8:7: Model Desc = PCI-Express Dual > > Channel 8Gb Fibre Channel HBA. > > [ 615.763540] qla2xxx [0000:27:00.0]-28a9:7: Hardware ver = PX2810403-01 > > F. > > [ 615.763543] qla2xxx [0000:27:00.0]-28aa:7: Driver ver = > > 8.07.00.38-k-debug. > > [ 615.763547] qla2xxx [0000:27:00.0]-28ab:7: Optrom version = 46.51. > > [ 615.763551] qla2xxx [0000:27:00.0]-28ac:7: Firmware vers = 8.06.02 > > (90d5). > > [ 615.763555] qla2xxx [0000:27:00.0]-28ae:7: OS Name and Version = Linux > > 4.11.0-rc2+ #13 SMP Mon Mar 13 21:51:13 PDT 2017. > > [ 615.763558] qla2xxx [0000:27:00.0]-28af:7: CT Payload Length = 0x80000. > > [ 615.763562] qla2xxx [0000:27:00.0]-28b0:7: Symbolic Name = QLE2562 > > FW:v8.06.02 DVR:v8.07.00.38-k-debug. > > [ 615.763564] qla2xxx [0000:27:00.0]-28b1:7: Vendor Id = 77100000. > > [ 615.763567] qla2xxx [0000:27:00.0]-28b2:7: Port Num = 1000000. > > [ 615.763569] qla2xxx [0000:27:00.0]-28b3:7: Fabric Name = > > 1000000533aa0b87. > > [ 615.763572] qla2xxx [0000:27:00.0]-28b4:7: BIOS Name = BIOS 3.00 > > [ 615.763575] qla2xxx [0000:27:00.0]-28b1:7: Vendor Identifier = QLGC. > > [ 615.763577] qla2xxx [0000:27:00.0]-28b5:7: RHBA identifier = > > 21000024ff460a5c. > > [ 615.775398] qla2xxx [0000:27:00.0]-28b9:7: RHBA FDMI V2 exiting > > normally. > > [ 615.775405] qla2xxx [0000:27:00.0]-28ba:7: FC4_TYPES=01 00. > > [ 615.775409] qla2xxx [0000:27:00.0]-28bb:7: Supported Port Speed = > > 1b000000. > > [ 615.775411] qla2xxx [0000:27:00.0]-28bc:7: Current_Speed = 10000000. > > [ 615.775414] qla2xxx [0000:27:00.0]-28bc:7: Max_Frame_Size = 80000. > > [ 615.775417] qla2xxx [0000:27:00.0]-28be:7: OS_Device_Name = > > qla2xxx:host7. > > [ 615.775420] qla2xxx [0000:27:00.0]-283d:7: HostName=dut5108. > > [ 615.775423] qla2xxx [0000:27:00.0]-28c0:7: Node Name = 20000024ff460a5c. > > [ 615.775425] qla2xxx [0000:27:00.0]-28c1:7: Port Name = 21000024ff460a5c. > > [ 615.775429] qla2xxx [0000:27:00.0]-28c2:7: port symbolic name = QLE2562 > > FW:v8.06.02 DVR:v8.07.00.38-k-debug > > > > > > Manufacturer: HP > > Product Name: ProLiant DL380p Gen8 > > Version: Not Specified > > Serial Number: USE334CSJL > > UUID: 32333536-3030-5355-4533-333443534A4C > > Wake-up Type: Power Switch > > SKU Number: 653200-B21 > > Family: ProLiant > > > > Thanks, > > Himanshu > > > > > > Hello Himanshu > > I just now cloned from Linus's tree and patched with the PCI fixes as you > suggested. > > This gets me this kernel and its failing. > > 4.11.0-rc2+ > > [ 9.099570] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA > Driver: 8.07.00.38-k. > [ 9.099704] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled. > [ 9.099705] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 101 iobase > 0xfffface3d8999000. > [ 9.248817] Console: switching to colour frame buffer device 128x48 > [ 9.305051] scsi host4: qla2xxx > [ 9.341336] qla2xxx: probe of 0000:27:00.0 failed with error -22 > [ 9.341475] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled. > [ 9.341478] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 101 iobase > 0xfffface3d89a9000. > [ 9.547011] scsi host4: qla2xxx > [ 9.583160] qla2xxx: probe of 0000:27:00.1 failed with error -22 > > I dont know why yours is not failing here. > Did you manage to test with the kernel I provided you yet. > > My server: > System Information > Manufacturer: HP > Product Name: ProLiant DL380p Gen8 > Version: Not Specified > Serial Number: USE246MH8W > UUID: 32333536-3030-5355-4532-34364D483857 > Wake-up Type: Power Switch > SKU Number: 653200-B21 > Family: ProLiant > > My ROM > Vendor: HP > Version: P70 > Release Date: 07/01/2015 > Address: 0xF0000 > > All prior kernels are working fine so I know the hardware is good. > > This is what I have installed > > 21:00.0 Ethernet controller: QLogic Corp. cLOM8214 1/10GbE Controller (rev > 58) > 21:00.1 Ethernet controller: QLogic Corp. cLOM8214 1/10GbE Controller (rev > 58) > 24:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel > Host Adapter (rev 03) > 24:00.1 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel > Host Adapter (rev 03) > 27:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI > Express HBA (rev 02) > 27:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI > Express HBA (rev 02) > > I will attach my boot log in a separate email just to you and Chad > > Thanks > Laurence > Hello Himanshu
Please let me have your .config you are using for your kernel. Thanks Laurence
