From: Duane Grigsby <duane.grig...@cavium.com>

This patch adds logic to  handle the completion of
FC-NVMe commands and creates a sub-command in the SRB
command structure to manage NVMe commands.

Signed-off-by: Darren Trapp <darren.tr...@cavium.com>
Signed-off-by: Duane Grigsby <duane.grig...@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumur...@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malav...@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madh...@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumsh...@suse.de>
---
 drivers/scsi/qla2xxx/qla_def.h | 17 +++++++++
 drivers/scsi/qla2xxx/qla_fw.h  | 22 ++++++++++--
 drivers/scsi/qla2xxx/qla_isr.c | 79 ++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_os.c  | 18 ++++++++--
 4 files changed, 131 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6f8df9cea8ff..4d889eb2993e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -412,6 +412,20 @@ struct srb_iocb {
                struct {
                        struct imm_ntfy_from_isp *ntfy;
                } nack;
+               struct {
+                       __le16 comp_status;
+                       uint16_t rsp_pyld_len;
+                       uint8_t aen_op;
+                       void *desc;
+
+                       /* These are only used with ls4 requests */
+                       int cmd_len;
+                       int rsp_len;
+                       dma_addr_t cmd_dma;
+                       dma_addr_t rsp_dma;
+                       uint32_t dl;
+                       uint32_t timeout_sec;
+               } nvme;
        } u;
 
        struct timer_list timer;
@@ -437,6 +451,7 @@ struct srb_iocb {
 #define SRB_NACK_PLOGI 16
 #define SRB_NACK_PRLI  17
 #define SRB_NACK_LOGO  18
+#define SRB_NVME_CMD   19
 #define SRB_PRLI_CMD   21
 
 enum {
@@ -4110,6 +4125,8 @@ typedef struct scsi_qla_host {
        struct          nvme_fc_local_port *nvme_local_port;
        atomic_t        nvme_ref_count;
        struct list_head nvme_rport_list;
+       atomic_t        nvme_active_aen_cnt;
+       uint16_t        nvme_last_rptd_aen;
 
        uint16_t        fcoe_vlan_id;
        uint16_t        fcoe_fcf_idx;
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index dcae62d4cbeb..b9c9886e8b1d 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -7,6 +7,9 @@
 #ifndef __QLA_FW_H
 #define __QLA_FW_H
 
+#include <linux/nvme.h>
+#include <linux/nvme-fc.h>
+
 #define MBS_CHECKSUM_ERROR     0x4010
 #define MBS_INVALID_PRODUCT_KEY        0x4020
 
@@ -603,9 +606,14 @@ struct sts_entry_24xx {
 
        uint32_t residual_len;          /* FW calc residual transfer length. */
 
-       uint16_t reserved_1;
+       union {
+               uint16_t reserved_1;
+               uint16_t nvme_rsp_pyld_len;
+       };
+
        uint16_t state_flags;           /* State flags. */
 #define SF_TRANSFERRED_DATA    BIT_11
+#define SF_NVME_ERSP            BIT_6
 #define SF_FCP_RSP_DMA         BIT_0
 
        uint16_t retry_delay;
@@ -615,8 +623,16 @@ struct sts_entry_24xx {
        uint32_t rsp_residual_count;    /* FCP RSP residual count. */
 
        uint32_t sense_len;             /* FCP SENSE length. */
-       uint32_t rsp_data_len;          /* FCP response data length. */
-       uint8_t data[28];               /* FCP response/sense information. */
+
+       union {
+               struct {
+                       uint32_t rsp_data_len;  /* FCP response data length  */
+                       uint8_t data[28];       /* FCP rsp/sense information */
+               };
+               struct nvme_fc_ersp_iu nvme_ersp;
+               uint8_t nvme_ersp_data[32];
+       };
+
        /*
         * If DIF Error is set in comp_status, these additional fields are
         * defined:
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 40385bc1d1fa..477aea7c9a88 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1799,6 +1799,79 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct 
req_que *req, void *tsk)
        sp->done(sp, 0);
 }
 
+static void
+qla24xx_nvme_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, void *tsk)
+{
+       const char func[] = "NVME-IOCB";
+       fc_port_t *fcport;
+       srb_t *sp;
+       struct srb_iocb *iocb;
+       struct sts_entry_24xx *sts = (struct sts_entry_24xx *)tsk;
+       uint16_t        state_flags;
+       struct nvmefc_fcp_req *fd;
+       uint16_t        ret = 0;
+       struct srb_iocb *nvme;
+
+       sp = qla2x00_get_sp_from_handle(vha, func, req, tsk);
+       if (!sp)
+               return;
+
+       iocb = &sp->u.iocb_cmd;
+       fcport = sp->fcport;
+       iocb->u.nvme.comp_status = le16_to_cpu(sts->comp_status);
+       state_flags  = le16_to_cpu(sts->state_flags);
+       fd = iocb->u.nvme.desc;
+       nvme = &sp->u.iocb_cmd;
+
+       if (unlikely(nvme->u.nvme.aen_op))
+               atomic_dec(&sp->vha->nvme_active_aen_cnt);
+
+       /*
+        * State flags: Bit 6 and 0.
+        * If 0 is set, we don't care about 6.
+        * both cases resp was dma'd to host buffer
+        * if both are 0, that is good path case.
+        * if six is set and 0 is clear, we need to
+        * copy resp data from status iocb to resp buffer.
+        */
+       if (!(state_flags & (SF_FCP_RSP_DMA | SF_NVME_ERSP))) {
+               iocb->u.nvme.rsp_pyld_len = 0;
+       } else if ((state_flags & SF_FCP_RSP_DMA)) {
+               iocb->u.nvme.rsp_pyld_len = le16_to_cpu(sts->nvme_rsp_pyld_len);
+       } else if (state_flags & SF_NVME_ERSP) {
+               uint32_t *inbuf, *outbuf;
+               uint16_t iter;
+
+               inbuf = (uint32_t *)&sts->nvme_ersp_data;
+               outbuf = (uint32_t *)fd->rspaddr;
+               iocb->u.nvme.rsp_pyld_len = le16_to_cpu(sts->nvme_rsp_pyld_len);
+               iter = iocb->u.nvme.rsp_pyld_len >> 2;
+               for (; iter; iter--)
+                       *outbuf++ = swab32(*inbuf++);
+       } else { /* unhandled case */
+           ql_log(ql_log_warn, fcport->vha, 0x503a,
+               "NVME-%s error. Unhandled state_flags of %x\n",
+               sp->name, state_flags);
+       }
+
+       fd->transferred_length = fd->payload_length -
+           le32_to_cpu(sts->residual_len);
+
+       if (sts->entry_status) {
+               ql_log(ql_log_warn, fcport->vha, 0x5038,
+                   "NVME-%s error - hdl=%x entry-status(%x).\n",
+                   sp->name, sp->handle, sts->entry_status);
+               ret = QLA_FUNCTION_FAILED;
+       } else if (sts->comp_status != cpu_to_le16(CS_COMPLETE)) {
+               ql_log(ql_log_warn, fcport->vha, 0x5039,
+                   "NVME-%s error - hdl=%x completion status(%x) resid=%x  
ox_id=%x\n",
+                   sp->name, sp->handle, sts->comp_status,
+                   le32_to_cpu(sts->residual_len), sts->ox_id);
+               ret = QLA_FUNCTION_FAILED;
+       }
+       sp->done(sp, ret);
+}
+
 /**
  * qla2x00_process_response_queue() - Process response queue entries.
  * @ha: SCSI driver HA context
@@ -2289,6 +2362,12 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct 
rsp_que *rsp, void *pkt)
                return;
        }
 
+       /* NVME completion. */
+       if (sp->type == SRB_NVME_CMD) {
+               qla24xx_nvme_iocb_entry(vha, req, pkt);
+               return;
+       }
+
        if (unlikely((state_flags & BIT_1) && (sp->type == SRB_BIDI_CMD))) {
                qla25xx_process_bidir_status_iocb(vha, pkt, req, handle);
                return;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index b2474952f858..ef5211fd2154 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -695,8 +695,10 @@ qla2x00_sp_free_dma(void *ptr)
        }
 
 end:
-       CMD_SP(cmd) = NULL;
-       qla2x00_rel_sp(sp);
+       if (sp->type != SRB_NVME_CMD) {
+               CMD_SP(cmd) = NULL;
+               qla2x00_rel_sp(sp);
+       }
 }
 
 void
@@ -5996,6 +5998,18 @@ qla2x00_timer(scsi_qla_host_t *vha)
        if (!list_empty(&vha->work_list))
                start_dpc++;
 
+       /*
+        * FC-NVME
+        * see if the active AEN count has changed from what was last reported.
+        */
+       if (atomic_read(&vha->nvme_active_aen_cnt) != vha->nvme_last_rptd_aen) {
+               vha->nvme_last_rptd_aen =
+                   atomic_read(&vha->nvme_active_aen_cnt);
+               ql_log(ql_log_info, vha, 0x3002,
+                   "reporting new aen count of %d to the fw\n",
+                   vha->nvme_last_rptd_aen);
+       }
+
        /* Schedule the DPC routine if needed */
        if ((test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
            test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags) ||
-- 
2.12.0

Reply via email to