It looks like it can't make a connection to your network printer at IP address 10.200.29.13, or the printer needs attention of some kind, etc.
Mark Post -----Original Message----- From: Keith Reynolds [mailto:[EMAIL PROTECTED]] Sent: Thursday, December 06, 2001 2:38 PM To: [EMAIL PROTECTED] Subject: Printing I have the following in /etc/printcap, this is output from "lpc status" 10.200.33.15-lp: queuing is enabled printing is enabled no entries no daemon present prt7: queuing is enabled printing is enabled 1 entry in spool area waiting for 10.200.29.13 to come up My "ps -ef" command shows the daemon as follows: 8840 1 0 12:02 ? 00:00:00 lpd start 8842 8840 0 12:02 ? 00:00:00 lpd start What is waiting to come up? I thought I had done this before? Why can't I "lpr prt7 /sbin/init.d/skeleton? Thanks, Keith NOTE: This e-mail message may contain information that may be privileged, confidential, and exempt from disclosure. It is intended for use only by the person to whom it is addressed. If you have received this message in error, please do not forward or use this information in any way, delete it immediately, and contact the sender as soon as possible by the reply option or by telephone at the telephone number listed (if available). Thank you.
