Are the content locations for these Deployment Types the same, or are they different for each (x64 and x86). It sounds like you are using the same content path for both, encompassing both installer contents.
On Wed, Jul 12, 2017 at 8:41 AM, Thelen, Chris <chris.the...@dawnfoods.com> wrote: > Have you verified in the AppEnforce log of what deployment type it is > running and then what both deployment types have set for the content folder > and verified that the folder does not have both x86 and x64 content in it? > > > > *From:* listsad...@lists.myitforum.com [mailto:listsadmin@lists. > myitforum.com] *On Behalf Of *Haritwal, Dhiraj > *Sent:* Wednesday, July 12, 2017 9:08 AM > *To:* mssms@lists.myitforum.com > *Subject:* RE: [mssms] Query about x86 & x64 bit content deployment > > > > This is what exactly I have done, Chris but issue is, it’s downloading > both x86 & x64 content on clients which should not happen. Ideally it > should download only x64 content to a 64bit OS & x86 content to a 32bit OS. > > > > > > Dhiraj > > > > > > > > *From:* listsad...@lists.myitforum.com [mailto:listsadmin@lists. > myitforum.com <listsad...@lists.myitforum.com>] *On Behalf Of *Thelen, > Chris > *Sent:* 12 July 2017 18:04 > *To:* mssms@lists.myitforum.com > *Subject:* RE: [mssms] Query about x86 & x64 bit content deployment > > > > Since you are doing this as an application why not let SCCM handle the OS > type detection? > > > > In your one application, create 2 deployment types that point to different > source folders. One for x86 and another for x64. Then set the OS > requirements for each deployment type to only run on that specific OS bit > version, x86 deployment type requires an x86 OS and x64 deployment type > requires a x64 OS. > > > > *From:* listsad...@lists.myitforum.com [mailto:listsadmin@lists. > myitforum.com <listsad...@lists.myitforum.com>] *On Behalf Of *Haritwal, > Dhiraj > *Sent:* Wednesday, July 12, 2017 7:45 AM > *To:* mssms@lists.myitforum.com > *Subject:* [mssms] Query about x86 & x64 bit content deployment > > > > Hi, > > > > I have to deploy an application which has separate module for x86 & x64. I > have created two deployment type for both versions along with OS > requirement. My query is, I want to copy only platform specific content to > any device. > > ie, only x64 bit version should get copy on a 64bit device & only x86 > should get copy on a 32bit device. Is there any option in SCCM2012 to do > the same. > > > > By default it’s copying both x64 & x86 content which takes time & chock > WAN BW for small remote locations. > > > > I was using traditional way through a batch file to check OS Type > (x86/x64), Copy specific content & install. > > > > > > Dhiraj > > > ------------------------------ > > > This email is confidential and intended only for the use of the individual > or entity named above and may contain information that is privileged. If > you are not the intended recipient, you are notified that any > dissemination, distribution or copying of this email is strictly > prohibited. If you have received this email in error, please notify us > immediately by return email or telephone and destroy the original message. > - This mail is sent via Sony Asia Pacific Mail Gateway.. > > > > > > > ------------------------------ > > > This email is confidential and intended only for the use of the individual > or entity named above and may contain information that is privileged. If > you are not the intended recipient, you are notified that any > dissemination, distribution or copying of this email is strictly > prohibited. If you have received this email in error, please notify us > immediately by return email or telephone and destroy the original message. > - This mail is sent via Sony Asia Pacific Mail Gateway.. > > > >
