>Hello to all of you.I have an msx vg8235(a philips model)
with 128 kbyte
>vram,(256kbytes total ram),,and a single drive 360
kbyte.The msx is working ok
>(the cartridges work fine),but unfortunatly the drive is
not working so i
>can't use disks so the msx is limited.The question is can i
replace the msx
>drive with a pc drive(of similar capacity) because i know
that msx and pc had
>the same format,(my pc and amiga can read msx disks
fine!).Or is there another
>way to fix it?
>Regards
>Nikolas.
Hello Nicolas
you can do that in 2 ways: use pc drive, use 34 pin
flatcable from the external connector of 8235, connect
driveselectsignal of internal driveconnector 0 to external
connector.
option 2 is to make a cable to connect 14 pin internal drive
connector to 34 pin flatcable connector of diskdrive.
Greetings
Maico Arts
MSX-NBNO
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
