-----Oorspronkelijk bericht-----
Van: J.P. Zeedijk <[EMAIL PROTECTED]>
Aan: '[EMAIL PROTECTED]' <[EMAIL PROTECTED]>
Datum: vrijdag 3 juli 1998 23:09
Onderwerp: ZIP on MSX
:Grauw, you didn't read: I wrote about the INTERNAL SCSI ZIP! That one has
:jumpers for all SCSI ID's and termination.
:You are right about zip together with HD, because if you only use ZIP, you
:have to reboot when you want to change ZIP's. I have (in a 8250) a Seagate
:20Mb on SCSI-ID 0, so booting and all major utillities are on that disk and
:all other stuff is on the ZIP's (I use 3 disks till now) I have on this MSX
:(8250 2+) Internal SCSI ZIP next to the HD. On the Turbo-R I have an IBM
:200Mb harddisk as bootdisk and for extra capacity an external SCSI ZIP on
:ID 5. But a pitty is that the disks made on Turbo-R with Novaxis-Gouda are
:not exchangeable with the 8250's MK SCSI disks and vise-versa. I am still
:looking for a tool for this problem, because I want to transfer a lot of
:data (about 100Mb) to the Turbo-R.
HPN can update your MK-SCSI-interface to a Bert 2.7-interface. On this
interface, you can convert the Novaxis-HD-format to the Bert 2.7-HD-format
and vice versa, if I'm correct. Contact Hans&Aly van Oranje (Hardware
Partners Nederland) for more info. He will provide you with the appropriate
information. Upgrading isn't that expensive...
~Grauw
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
