Sure, and I didn't call you dumb. I'm not dumb for being left out the Russian space program, or wanting to write a book without a alpha-degree or what else.. It's a hard area, which I why I've tried to make a few noticeable remarks, to shake the particular subject up a bit, so to speak.

If you're serious, I don't mind summing a few things up with practical application, no problem. Might even be fun.

But not at this moment. Maybe tomorrow.

One main thing for now, there's an interesting matter about the Switched Filter, primarily at the moment to broaden the attention, and to make the payload of this message enter in a more general digital and signal processing domain for musical (and other) applications:

- Most digital systems as we now know them are Time Quantized (usually equally spaced times steps with impulse-based samples (for the sake of the Reconstruction theorem)), and Amplitude Quantized ("vertical" steps, like 16 bits for instance), for the sake of being able to use digital computers.

- As a interesting comparison (for the effect) there are also Time-Quantized, Amplitude-Continuous processing chips since at least the early (Time Division Multiplexing) digital phones, of which my switched filter is an example. Clear difference: no vertical resolution to create quantization noise, and it is possible to nowadays buy chips that have digitally programmable *analog* signal path chips that may benefit from such tricks, possibly applicable in modern "digital: amplifiers.

- Of course there are, at least since music in the 60s I think, machines which do amplitude quantization only, like a "grungelize" sound, applying a staircase distortion to the signal, but *without* sampling the signal in the time dimension.

- For modern attempts as clean analog signal paths *with* time-varying filters one can make use of digitally programmable amplifiers, like the Crystal/Burr-Brown half-dB step, fast digital control amplifier chips (a project of mine here, at about 1/3th of the page, only if you're interested: http://www.theover.org/Audio/index2.html ), using these chips instead of "Operational Trans-conductance Amplifier"s, digitally controlled analog filters may be created. The switching technique could add more resolution to this solution, and requires fast digital control and an analysis of the effects of applying digital dithering of such kind.

- Of course the original of many software implementations of digitally controlled State Varying Filters (besides the fully analog Moogs and others), from early computer-controlled analog signal path music synthesizers on, has all kinds of tuning built in the control path of the filters (and other components like oscillators and VCAs). So a part of the question I asked myself was: how is it that those analog filters sound good (or bad if that's the will of the sound programmer), given that a part of the control signal path comes from digital control. For instance: what are the properties of the DA convertor that changes a know-turn on the computer side of the instrument, into an electrical signal to drive the "cut-off" control line of the filter circuit.

Gr.

  T.V.
--
dupswapdrop -- the music-dsp mailing list and website:
subscription info, FAQ, source code archive, list archive, book reviews, dsp 
links
http://music.columbia.edu/cmc/music-dsp
http://music.columbia.edu/mailman/listinfo/music-dsp

Reply via email to