I'm sure we could use the driver chips for plasma TVs. if you can find the data
On Tuesday, June 2, 2026 at 1:56:54 PM UTC+1 Martin Černý wrote: > Apparently these chips were used in industrial printer machines. Searching > on ebay for "kodak charge driver board" does yield some results of used > PCBs with HV3418 onboard. Those boards are expensive but so far seem to be > the only way to get the chips. I got myself one of those boards, hopefully > the chips work. > > If anyone find a different source, please add it here! Those chips are > super useful for variety of neon projects. > > Dne pondělí 16. března 2026 v 8:54:38 UTC+1 uživatel Martin Černý napsal: > >> My reply doesnt show for some reason... I do already use HV507 but I have >> to pwm so it doesnt overheat. HV3418 is more powerful so I could run the >> neons at full potential :) It's pin compatible so I could just swap them. >> >> Dne neděle 15. března 2026 v 19:38:25 UTC+1 uživatel Michael G. napsal: >> >>> You might be able to use >>> https://www.digikey.de/de/products/detail/microchip-technology/HV507PG-G/4902491?s=N4IgTCBcDaIBYDcCsAGA7CAugXyA. >>> >>> However, it’s only 5V, not 12V, but the pin configuration is compatible. >>> The rest of the specifications are also the same, or at least very similar. >>> >>> Martin Černý schrieb am Sonntag, 15. März 2026 um 13:00:16 UTC+1: >>> >>>> If anyone has this driver, please let me know. I'd be immensely >>>> grateful, need two of them for a special clock project. >>> >>> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion, visit https://groups.google.com/d/msgid/neonixie-l/86b41f38-0bda-40c4-beeb-ba4c22fdad31n%40googlegroups.com.
