On Tue, May 22, 2012 at 4:43 AM, Liviu Ionescu <[email protected]> wrote: > I recently purchased a J-Link probe, and, to my surprise, after > upgrading to the latest SEGGER firmware, it does not work with > 0.5.0 (nor with the latest repository version). > > Although it was manufactured in 2012, the probe originally > came with 2 years old firmware: > > Info : J-Link ARM V8 compiled May 20 2010 17:07:46 > Info : J-Link caps 0xb9ff7bbf > Info : J-Link hw version 80000 > Info : J-Link hw type J-Link > > OpenOCD had no problems with this version. > > It took me a while to test many previous versions. The latest > I could make it work again was the FW version from December 1st, > 2009, included in the J-Link packages from v1.10i to v4.14g. > (v4.14h no longer works).
Hmm, I believe the issue has been solved by updating to the latest Segger firmware. What is the version you are updating to? Last time Segger did spend time to fix the issue and when I tried it, 4.33h beta firmware solved the problem and the latest release version is newer than that. http://lists.berlios.de/pipermail/openocd-development/2011-August/020741.html I have not tried J-Link for a while, I will try it later. -- Xiaofan ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
