Error: ftfx command failed FSTAT: A0 W0: 0B000000 W1: 00000100 W2: 00000000 Error: error writing to flash at address 0x00000000 at offset 0x00000000
Can't be sure exactly why I'm getting this error - none of the flash configuration bits have been changed. On Thu, May 24, 2012 at 4:07 PM, Christopher Friedt <[email protected]> wrote: > Hmm... nice patch. > > Just applied to use with the twr-k20 (k20d50m128) ... still unable to > write to flash though. I'm heading toward a deadline rather quickly, > and would certainly be available to help test / debug anything else > you submit. > > Thanks, > > C > > On Wed, May 23, 2012 at 2:41 PM, Spencer Oliver <[email protected]> wrote: >> On 23/05/2012 19:06, [email protected] wrote: >>> This is an automated email from Gerrit. >>> >>> Christopher Kilgour ([email protected]) just uploaded a new patch set >>> to Gerrit, which you can find at http://openocd.zylin.com/663 >>> >>> -- gerrit >>> >>> commit b99fd097b26c50dd50aae0d04e8b1517eaf15e66 >>> Author: Christopher Kilgour<[email protected]> >>> Date: Wed May 23 11:05:28 2012 -0700 >>> >>> kinetis: update support for all program flash granularities >>> >>> Updates the Kinetis NOR flash support to handle all known block and >>> sector >>> sizes. Previously only 2kiB sectors were hard-coded, now all four >>> known >>> combinations non-volatile sector sizes are supported. >>> >>> The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM >>> is >>> also introduced. This means each "block" of flash (in Freescale >>> terms) is >>> treated as a bank in OpenOCD. Correspondingly, the existing board >>> configuration for the TWR-K60M512 eval system is updated to recognize >>> two >>> banks instead of one. >>> >>> A board config for the TWR-K60F120M is also added. >>> >>> Bank and sector erase and programming has been checked with both of the >>> mentioned eval boards. >>> >>> Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a >>> Signed-off-by: Christopher Kilgour<[email protected]> >>> >> >> Just for info you could have edited the first change rather than upload >> a new change, eg. >> >> // make patch and push first change to gerrit >> git push review >> >> // patch fails jenkins build so requires tweaking >> // first make changes then >> git commit -a --amend >> git push review >> >> It is documented in the OpenOCD dev guide: >> http://openocd.sourceforge.net/doc/doxygen/html/patchguide.html >> >> Cheers >> Spen >> >> ------------------------------------------------------------------------------ >> Live Security Virtual Conference >> Exclusive live event will cover all the ways today's security and >> threat landscape has changed and how IT managers can respond. Discussions >> will include endpoint security, mobile security and the latest in malware >> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ >> _______________________________________________ >> OpenOCD-devel mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/openocd-devel ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
