If it's an FTDI-based adapter, you can reprogram the VID/PID of each one. That's what I did for a 3-up gang programmer.
> -----Original Message----- > From: Xiaofan Chen [mailto:[email protected]] > Sent: Wednesday, May 30, 2012 5:42 AM > To: Shovan Kumar Paul > Cc: [email protected]; [email protected] > Subject: Re: [OpenOCD-devel] (no subject) > > On Wed, May 30, 2012 at 6:04 PM, Shovan Kumar Paul > <[email protected]> wrote: > > Hello Chen, > > > > Do you have any idea how to connect two board from the > > same pc and openocd. Is there any suggestion for that. > > I believe only a few adapter can support this feature. > Technically OpenOCD can support this feature by > specifying the serial number of the adapters as > one parameters to identify different board, but I > think only a few adapters support this feature. > > What is your adapter? > > > -- > Xiaofan > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > OpenOCD-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/openocd-devel ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
