Thank you for the support an all the hints. Today everything went right - same configuration... I don't know, what happened two days ago. So autostart works again :-) And just a tipp for *cleartype on windows*: that works well with freeRDP, but not with rdesktop...
Thank you, Joachim > Jörn Frenzel <j.fren...@openthinclient.com> hat am 6. Januar 2017 um 17:21 > geschrieben: > > > Dear Nameless, > > at first doublecheck that you have all updates installed! There have > been some changes in autostarting apps the last 3 months. You should > have at least tcos-scripts 2.1-28.6 installed. > > Please ensure that your configured autostart apps appear in > /home/tcos/.config/autostart/YourAppName.desktop . These files are > picked up by mate, once mate itself has successfully started (not before). > If these files do exist correctly, but your app does not start > automatically, hmmm.... > > Please check your name resolution, routes/gateways and so on. You can > also cat your /home/tcos/.config/autostart/YourAppName.desktop in a > xterm (CtrlxAlt+x) and copy/paste the command right of "exec=". Run this > command in the same xterm and look if there is any error. > > Good luck! > > Jörn Frenzel > > -- > Head of > Development & Support > > openthinclient gmbh, Büro Dresden > > > > > > Am 04.01.2017 um 19:21 schrieb r...@mailbox.org: > > Hi there, I installed the openthinclient-appliance 2.1 on a Hyper-V 2012 > > and tested it with a hardware-client via PXE. I want to start rdesktop on a > > Windows Server 2012 and everything seems to work well, incl. autostart of > > rdesktop. But after 2 or 3 reboots the thinclient doesn't autostart the > > rdesktop anymore (same configuration!). Manually starting it with the > > rdesktop-icon is no problem! > > Nearly 2 hours I tried everything, but without success: different > > configurations of rdesktop and freeRDP, rebooting the > > openthinclient-appliance, using different hardwaretypes, deleting the > > thinclient in the appliance and adding it new to it etc. etc. No chance. > > Same with a cmd: no autostart. > > The strange is: if I use in rdesktop "shutdown thinclient when closing > > rdesktop", the thinclient shutdown automatically ca 2 minutes after > > booting. But without starting rdesktop itselfes before. So there seems to > > be any kind of working autostart. (without this shutdown-option the client > > doesn't shutdown automatically). If the boot screen closes, I see a white > > mousepointer for a few seconds and afterwards the black watch for about 10 > > seconds. Starting rdesktop with delay (10 seconds) didn't also help, the > > network is performant. And: also the "Desktop"-App has no influence, > > independend of its configuration (e.g. Xfce-Kiosk). > > Any idea? The goal would be to start rdesktop automatically or - better - > > directly in kiosk-modus. > > Thank You!!! ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ The Open Source Thin Client Solution http://openthinclient.org openthinclient-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openthinclient-user
