Hi Gregoire, Thanks for reporting this. It smells like a bug. Can you please produce and send me privately a trace with some NetFlow packets containing NAT64 entries so to be able to reproduce/fix in lab?
Cheers, Paolo On Fri, Mar 21, 2014 at 05:41:12PM +0100, Grégoire Leroy wrote: > Hello, > > I'm using an ASR1001 Cisco for CGN (NAT444 and NAT64). The ASR1001 > sends logs with netflow and I can read it with the method described > here (http://wiki.pmacct.net/OfficialExamples), section 17. To read > them, I use pmacct 1.5.0RC2 (in fact, nfacctd). > > For NAT444, everything is good, I got records as : > 100.96.0.10 58776 [PUB_IP_1] > 18782 2 2014-03-21 17:14:53.651000000 0 > 0 > > However, here is what I get with NAT64 : > 0.0.0.0 51056 [PUB_IP_2] > 1029 2 2014-03-21 17:14:53.574000000 0 > 0 > > I should get an IPv6 address instead of "0.0.0.0". > Note : I've built pmacct with --enable-ipv6 > > Do you have any hints about it ? Did I miss something ? > > Thank you very much, > Regards, > Grégoire Leroy > > _______________________________________________ > pmacct-discussion mailing list > http://www.pmacct.net/#mailinglists _______________________________________________ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists