Re: Port Width for LinearStateSpace Input

[Stephen Andrew Neuendorffer]

The width of ports is determined based on the number of connections that 
you make to it.
I'm guessing that you have made a fairly common vergil error:  It is not 
enough for links to "look"
connected to be connected... you actually have to drag the end of the link 
to the port and see it
'snap'.   Other ways (such as moving an actor over a link) don't work...

This is something that has long been on my list of things to improve in the 
user interface...  it
should probably give some feedback about being connected (probably by 
changing a thin line to a
thick one after being connected).

Steve

At 09:55 AM 3/9/2004 -0500, Keith Jacobs wrote:

I am building a simulation using a LinearStateSpace actor. I have 
configured this actor and used a Continuous Sinewave as a test input. When 
I run the simulation, I get the following Exception message:

"The number of columns of the B matrix (1) should be equal to the width of 
the input port (0)"

How do I set the input port width to the correct width?

Thanks!

Keith Jacobs


----------------------------------------------------------------------------
Posted to the ptolemy-hackers mailing list.  Please send administrative
mail for this list to: [EMAIL PROTECTED]