On Wed, May 24, 2017 at 05:09:19PM +0200, Clemens Gruber wrote: > libgpiod is a C library with tools for interacting with the Linux > GPIO character device. Add a package for it. > > Note: Requires kernel-headers >= 4.8. > > Signed-off-by: Clemens Gruber <clemens.gru...@pqgruber.com> > ---
This should have a changelog below the tripledash. > patches/libgpiod-0.2/autogen.sh | 1 + > rules/libgpiod.in | 58 +++++++++++++++++++++++++++++++ > rules/libgpiod.make | 76 > +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 135 insertions(+) > create mode 120000 patches/libgpiod-0.2/autogen.sh > create mode 100644 rules/libgpiod.in > create mode 100644 rules/libgpiod.make > > diff --git a/patches/libgpiod-0.2/autogen.sh b/patches/libgpiod-0.2/autogen.sh > new file mode 120000 > index 000000000..9f8a4cb7d > --- /dev/null > +++ b/patches/libgpiod-0.2/autogen.sh > @@ -0,0 +1 @@ > +../autogen.sh > \ No newline at end of file > diff --git a/rules/libgpiod.in b/rules/libgpiod.in > new file mode 100644 > index 000000000..23625ed49 > --- /dev/null > +++ b/rules/libgpiod.in > @@ -0,0 +1,58 @@ > +## SECTION=system_libraries > + > +menuconfig LIBGPIOD > + tristate > + prompt "libgpiod" > + help > + libgpiod is a library accompanied by a set of tools for > + interacting with the Linux GPIO character device. > + Requires kernel-headers >= 4.8. > + > +if LIBGPIOD > + > +config LIBGPIOD_TOOLS > + bool > + > +config LIBGPIOD_GPIODETECT > + bool > + prompt "Install gpiodetect" > + select LIBGPIOD_TOOLS > + help > + Lists all gpiochips present on the system > + > +config LIBGPIOD_GPIOINFO > + bool > + prompt "Install gpioinfo" > + select LIBGPIOD_TOOLS > + help > + Lists all lines of specified gpiochips > + > +config LIBGPIOD_GPIOGET > + bool > + prompt "Install gpioget" > + select LIBGPIOD_TOOLS > + help > + Reads values of specified GPIO lines > + > +config LIBGPIOD_GPIOSET > + bool > + prompt "Install gpioset" > + select LIBGPIOD_TOOLS > + help > + Sets values of specified GPIO lines > + > +config LIBGPIOD_GPIOFIND > + bool > + prompt "Install gpiofind" > + select LIBGPIOD_TOOLS > + help > + Finds the gpiochip given the line name > + > +config LIBGPIOD_GPIOMON > + bool > + prompt "Install gpiomon" > + select LIBGPIOD_TOOLS > + help > + Waits for events on a GPIO line > + > +endif > diff --git a/rules/libgpiod.make b/rules/libgpiod.make > new file mode 100644 > index 000000000..b1518ae35 > --- /dev/null > +++ b/rules/libgpiod.make > @@ -0,0 +1,76 @@ > +# -*-makefile-*- > +# > +# Copyright (C) 2017 by Clemens Gruber <clemens.gru...@pqgruber.com> > +# > +# See CREDITS for details about who has contributed to this project. > +# > +# For further information about the PTXdist project and license conditions > +# see the README file. > +# > + > +# > +# We provide this package > +# > +PACKAGES-$(PTXCONF_LIBGPIOD) += libgpiod > + > +# > +# Paths and names > +# > +LIBGPIOD_VERSION := 0.2 > +LIBGPIOD_MD5 := e3430f35b6efa842693d659c0bfb7ad5 > +LIBGPIOD := libgpiod-$(LIBGPIOD_VERSION) > +LIBGPIOD_SUFFIX := tar.gz > +LIBGPIOD_URL := > https://github.com/brgl/libgpiod/archive/v$(LIBGPIOD_VERSION).$(LIBGPIOD_SUFFIX) > +LIBGPIOD_SOURCE := $(SRCDIR)/$(LIBGPIOD).$(LIBGPIOD_SUFFIX) > +LIBGPIOD_DIR := $(BUILDDIR)/$(LIBGPIOD) > +LIBGPIOD_LICENSE := LGPL-2.1 > +LIBGPIOD_LICENSE_FILES := > file://COPYING;md5=2caced0b25dfefd4c601d92bd15116de > + > +# > ---------------------------------------------------------------------------- > +# Prepare > +# > ---------------------------------------------------------------------------- > + > +LIBGPIOD_CONF_TOOL := autoconf > +LIBGPIOD_CONF_OPT := \ > + $(CROSS_AUTOCONF_USR) \ > + --$(call ptx/endis, PTXCONF_LIBGPIOD_TOOLS)-tools \ > + --disable-tests > + > +# libgpiod requires kernel headers >= 4.8 > +ifdef PTXCONF_KERNEL_HEADER > +LIBGPIOD_CPPFLAGS := \ > + -I$(KERNEL_HEADERS_INCLUDE_DIR) > +endif > + > +LIBGPIOD_TOOLS-$(PTXCONF_LIBGPIOD_GPIODETECT) += gpiodetect > +LIBGPIOD_TOOLS-$(PTXCONF_LIBGPIOD_GPIOINFO) += gpioinfo > +LIBGPIOD_TOOLS-$(PTXCONF_LIBGPIOD_GPIOGET) += gpioget > +LIBGPIOD_TOOLS-$(PTXCONF_LIBGPIOD_GPIOSET) += gpioset > +LIBGPIOD_TOOLS-$(PTXCONF_LIBGPIOD_GPIOFIND) += gpiofind > +LIBGPIOD_TOOLS-$(PTXCONF_LIBGPIOD_GPIOMON) += gpiomon > + > +# > ---------------------------------------------------------------------------- > +# Target-Install > +# > ---------------------------------------------------------------------------- > + > +$(STATEDIR)/libgpiod.targetinstall: > + @$(call targetinfo) > + > + @$(call install_init, libgpiod) > + @$(call install_fixup, libgpiod, PRIORITY, optional) > + @$(call install_fixup, libgpiod, SECTION, base) > + @$(call install_fixup, libgpiod, AUTHOR, "Clemens Gruber > <clemens.gru...@pqgruber.com>") > + @$(call install_fixup, libgpiod, DESCRIPTION, "Linux GPIO character > device library") > + > + @$(call install_lib, libgpiod, 0, 0, 0644, libgpiod) > + > + @for tool in $(LIBGPIOD_TOOLS-y); do \ > + $(call install_copy, libgpiod, 0, 0, 0755, -, \ > + /usr/bin/$$tool); \ > + done > + > + @$(call install_finish, libgpiod) > + > + @$(call touch) > + > +# vim: syntax=make > -- > 2.13.0 > > > _______________________________________________ > ptxdist mailing list > ptxdist@pengutronix.de -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de
