Hi Mike, Yes I'm still here, but only as an onlooker now, dont have any QL equipment at all now.
Gold Card has a 68000 processor on board and Super Gold Card has a 68020 on board so the 68008 is defunct when either of these are plugged in to a standard QL. Mr Verbeek didnt mention if he had a Yellow boarded Gold Card or a Red boarded Gold Card, cos there is a difference as noted in the Qubide manual. Ron ----- Original Message ----- From: "Mike MacNamara" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, May 19, 2002 12:39 PM Subject: Re: [ql-users] gold card and qubide > Hi > I thought removing the 68008 only applied to Super Gold Card, but > was still required on the Gold Card? > > Nice to hear your still there Ron > > Regards > > Mike > > [EMAIL PROTECTED] > > www.macnamaras.com > ----- Original Message ----- > From: "henk verbeek" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, May 19, 2002 9:46 AM > Subject: RE: [ql-users] gold card and qubide > > > > I did this but i still have got the same problem. I also tried > another power > > supply but all i get is a blank screen after the first reset. > Could it be > > the ql is not getting enough power ? Has anyone got a setup > like mine > > working ? > > > > Henk Verbeek. > > > > -----Oorspronkelijk bericht----- > > Van: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]Namens Ron Dunnett > > Verzonden: vrijdag 17 mei 2002 20:03 > > Aan: [EMAIL PROTECTED] > > Onderwerp: Re: [ql-users] gold card and qubide > > > > > > Remove the 68008 it is not needed anymore if you have a Gold or > Super Gold > > Card. > > > > That normally cures the problem you are having. > > > > Ron > > > > ----- Original Message ----- > > From: "henk verbeek" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, May 17, 2002 1:36 PM > > Subject: [ql-users] gold card and qubide > > > > > > > Hello everyone, > > > > > > I have a standard ql with a qubide and a gold card. If i > connect the gold > > > card or the qubide separatly they work fine but as soon as i > put them > > > together (quibide first and after this the gold card at the > left hand slot > > > of my classic ql) the ql doesn't boot up anymore. > > > I already tried the jumpersettings j3+j4+j5 and j3+j4 only > but it still > > > doesn't work. I know its possible to let them work together > but how? Does > > > anyone have a clue ? or do i have to buy an mplane or > something like that > > ? > > > > > > Henk Verbeek > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
