I'm beginning to set up some Green Heron wireless control switching, and
now I need to convey frequency information between DX4WIN and the Green
Heron environment using the GHE Everyware UDP communication. It appears
that PstRotatorAz will do the job, but I'm unsure of the exact setup
required.
If there's an easy way to get just frequency information from DX4WIN I
would be really interested in hearing what it is.I **think** the SteppIR
control function in DX4WIN needs to be activated using the COM port to
COM port connection described in the PstRotatorAz documentation to pass
frequency information.I have a LOT of COM ports active in my system,
many of them virtual from LP-Bridge and the microHAM environment. I also
have many physical COM ports that are used to maintain my two Elecraft
stations. Is there a PstRotatorAz program limit to a specific range of
COM port numbers, or can it handle COM ports of arbitrary number,
especially greater than 20 or so?Once the frequency information is
available, does it send both VFO A and VFO B frequency information in
the UDP broadcasts?
At this time, I don't need to use PstRotatorAz to actually do SteppIR
control, although that will eventually be required as station setup
advances. If the radio is in Split mode does DX4WIN send the Transmit
frequency to the SteppIR controller port?
Sorry to be cross-posting and asking so many questions, but I'm really
trying to figure out how to couple DX4WIN to the GHE system as
efficiently as possible.
73...
Randy, W8FN
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
