I have an ATI card that is using the generic radeon driver at the
moment. Yes, lcd brightness is working the so is the ambient
light snesor - I base that claim ont he fact that the lcd brightness
changes intensity when i turn off the lights.
Eric
JOAN MASSICH VALL wrote:
Do you have
Alden Huang wrote:
Eric Robertson wrote:
I had a problem when I upgraded kernels as well. When on the 2.6.15
kernel I2C was a module. I did not change this config when I first
compiled the 2.6.16 kernel. I re-compiled w/ I2C compiled intot he
kernel the lcd sensor started to work but I
Eric Robertson wrote:
The result, my syslog is filling up w/ hundreds of lines detailing the
i2c devices loaded the keyboard now lights up. When I boot back to
the old kernel (the one without the debug_core debug_bus enabled) it
stops working. lcd brightness works on both of them works on
Am Dienstag, 30. Mai 2006 06:00 schrieb ext Leandro Melo de Sales:
When I boot from livecd the configuration of my disks is as follows:
BUS=scsi
/dev/sda - SYSFS{model}==SAMSUNG SP...
BUS=scsi
/dev/sdb - SYSFS{model}==SysOp
SATA or real SCSI?
I got this
Tuesday 30 May 2006 07:41 skrev Graham Murray:
Besides, by looking at the terminal while merging packages, you will
soon notice, that lot's of packages add their very own CFLAGS to your
default ones. For example mplayer or xine-lib was compiled with '-O3' on
my system, allthough i have
Am Montag, 29. Mai 2006 16:36 schrieb ext Teresa and Dale:
It's not for English speakers for sure. I can't make out one word. Can
someone translate for the rest of us?
Hmm, maybe catalan?
Bye...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
Configuration Manager |
Tuesday 30 May 2006 07:51 skrev Iain Buchanan:
Ah, I was looking in /etc/init.d wondering why I couldn't find it :) I
have bad RAM in my head. I guess sh scripts can be run by sh and bash,
and probably other --sh variants. Not that that helps with this topic,
I was just thinking aloud :)
$
On 5/29/06, Leandro Melo de Sales [EMAIL PROTECTED] wrote:
BUS==scsi, SYSFS{model}==SAMSUNG SP123245, NAME=/dev/sda
BUS==scsi, SYSFS{model}==SysOp , NAME=/dev/sdb
BUS==scsi, SYSFS{model}==Dados , NAME=/dev/sdc
1. You probably need the := syntax to prevent later rules
Yes, it's catalan. Here is the translation.. but it's a messageto other people.
begin translation
Guys
this has a good look... to share photos quickly..
maybe we would test to see if it's ok, don't you? a new way to have
the photos updated... are Edgar or Pau volunteers? I don't see Jordi
Hello List!
We have a small network with two 24 port switches. We assign ip address to
clients by dhcp based on the clients mac address, and have a pool of
addresses for guest notebooks. My problem is that if someone plugs a notebook
into the network and gets an ip then I can't find out the
Hi folks,
when prelinking, what are undefined non-weak symbols? And how can I avoid
them? ;-)
Uwe
--
Mark Twain: I rather decline two drinks than a German adjective.
--
gentoo-user@gentoo.org mailing list
Hello List!
Does somebody know how to start a windows msi install file with wine?
If I just simply try to start it I get the following error message:
$ wine /mnt/cdrom/Installation/HydroGeo_Analyst.msi
wine: could not load LZ:\\mnt\\cdrom\\Installation\\HydroGeo_Analyst.msi:
Bad EXE format for
On Tuesday 30 May 2006 09:53, Stefán István wrote:
We have a small network with two 24 port switches. We assign ip
address to clients by dhcp based on the clients mac address, and have
a pool of addresses for guest notebooks. My problem is that if someone
plugs a notebook into the network and
On Tue, 30 May 2006 08:33:28 +0200
Javier [EMAIL PROTECTED] wrote:
[...]
Thanks Javi,
I did the translation but I sent it to Dale...
Best Regards,
Javi
Cheers!
--
Arnau Bria
http://blog.emergetux.net
- Mama, mama en el colegio me llaman Friki
- ¿Y tú que haces?
- Me quito dos puntos de
2006/5/30, Stefán István [EMAIL PROTECTED]:
Hello List!Does somebody know how to start a windows msi install file with wine?If I just simply try to start it I get the following error message:$ wine /mnt/cdrom/Installation/HydroGeo_Analyst.msiwine: could not load
060529 JimD wrote:
Does anyone have any suggestions for some fun email based games?
I guess I have some turn-based strategy like game in mind.
The International Correspondence Chess Federation is well-established :
http://testarea.iccf-webchess.com/
Diplomacy is also played a lot via
On Tue, 30 May 2006 10:00:54 +0200
Stefán István [EMAIL PROTECTED] wrote:
Hello List!
Does somebody know how to start a windows msi install file with wine?
If I just simply try to start it I get the following error message:
$ wine /mnt/cdrom/Installation/HydroGeo_Analyst.msi
wine: could
On Mon, 29 May 2006 23:47:17 +, John Laremore wrote:
and you just sent me 6-8 more emails.
Yes, we did, because you asked to be sent them. If you took the trouble
to read even one of them, say the one you just quoted, you'd know where
they came from, why, and how to stop them.
If you need
Tuesday 30 May 2006 10:38 skrev Neil Bothwick:
If you took the trouble
to read even one of them, say the one you just quoted, you'd know where
they came from, why, and how to stop them.
Earlier today I sent a mail to [EMAIL PROTECTED] and put
his
mail address in the from field. I believe
Hi folks,
can anyone give me a quick hint, how to trigger a complete rebuild
if some build settings, ie CFLAGS or USEFLAGS are changed ?
thanks
--
-
Enrico Weigelt== metux IT service
phone: +49 36207 519931
# emerge -e world
On Tuesday, 30 May 2006 19:14, Enrico Weigelt wrote:
Hi folks,
can anyone give me a quick hint, how to trigger a complete rebuild
if some build settings, ie CFLAGS or USEFLAGS are changed ?
thanks
--
-
Enrico Weigelt schrieb:
Hi folks,
can anyone give me a quick hint, how to trigger a complete rebuild
if some build settings, ie CFLAGS or USEFLAGS are changed ?
thanks
Yo Enrico,
emerge -aev world
should do the trick.
Jürgen
--
gentoo-user@gentoo.org mailing list
Hi,
My new IM (Jabber) adress is : [EMAIL PROTECTED]
My new email is : [EMAIL PROTECTED]
Beber
--
gentoo-user@gentoo.org mailing list
Hi,
is there a legal way to change the shape of the Cursor in X.org ???
Thank you very much for any helpful reply in advance!
Keep hacking!
mcc
--
gentoo-user@gentoo.org mailing list
I assume you're talking about Cursor Themes. Any desktop environment should
allow you to install new themes. Otherwise I believe you can download a theme
and put it in ~/.icons/default/ and it will become the default cursor theme
for that user.
On Tuesday, 30 May 2006 20:08, Meino Christian
On Tue, 2006-05-30 at 08:04 +0200, Bo Ørsted Andresen wrote:
Tuesday 30 May 2006 07:41 skrev Graham Murray:
Besides, by looking at the terminal while merging packages, you will
soon notice, that lot's of packages add their very own CFLAGS to your
default ones. For example mplayer or
Richard,
when I change any rules, should I have to execute a command in order
to update the udev rules?
Thank you,
Leandro.
2006/5/30, Richard Fish [EMAIL PROTECTED]:
On 5/29/06, Leandro Melo de Sales [EMAIL PROTECTED] wrote:
BUS==scsi, SYSFS{model}==SAMSUNG SP123245, NAME=/dev/sda
On Tue, 30 May 2006 11:55:24 +0200, Jürgen Pierau wrote:
can anyone give me a quick hint, how to trigger a complete rebuild
if some build settings, ie CFLAGS or USEFLAGS are changed ?
emerge -aev world
For a change of CFLAGS. For USE changes you only need to rebuild the
affected packages
Richard,
You said that one rule can override other, but if you read udev
manual ( http://www.reactivated.net/writing_udev_rules.html ), you'll
realize that what you said I think is incorrect.
Files in /etc/udev/rules.d/ are parsed in lexical order. udev will
stop processing rules as soon as it
Bertrand Jacquin wrote:
Hi,
My new IM (Jabber) adress is : [EMAIL PROTECTED]
My new email is : [EMAIL PROTECTED]
Beber
If you want to change the address for this list, you need to unsuscribe
from the old address and subscribe with the new address. I don't think
anyone here can change it
Norman Rieß wrote:
Tuesday 30 May 2006 10:38 skrev Neil Bothwick:
If you took the trouble
to read even one of them, say the one you just quoted, you'd know where
they came from, why, and how to stop them.
Earlier today I sent a mail to [EMAIL PROTECTED] and put
his
mail address in
On Tue, 30 May 2006 06:35:39 +0200, Bo Ørsted Andresen wrote:
That of course should have been negated...
if [ -n $PS1 ]
Or even
if [ -n $PS1 ]
or you'll get an error if PS1 is undefined.
--
Neil Bothwick
If the pen is mightier than the sword, and a picture is worth a thousand
words,
Arnau Bria wrote:
On Tue, 30 May 2006 08:33:28 +0200
Javier [EMAIL PROTECTED] wrote:
[...]
Thanks Javi,
I did the translation but I sent it to Dale...
Best Regards,
Javi
Cheers!
I was wanting to make sure whether he needed help fixing his Gentoo box
or not. Sounds like he
On 5/29/06, Colleen Beamer [EMAIL PROTECTED] wrote:
Open up your e-mail client.
In the To: box type the following:
[EMAIL PROTECTED]
You don't need a subject or anything in the body. Send the e-mail.
You'll be unsubscribed. Trust me! I've unsubscribed and resubscribed a
number of times!
On Tuesday 30 May 2006 06:25, kashani wrote:
Hemmann, Volker Armin wrote:
that is the point, where friends are important: sometimes you need
someone who
calls you and suggests an evening of AxisAllies (the board game), beer,
pizza and cigarillos (because puffing one while throwing the
Hi,
I am trying to install qemu and kqemu, and I run into a problem:
localhost ~ # emerge qemu kqemu
Calculating dependencies... done!
Emerging (1 of 33) x11-proto/xextproto-7.0.2 to /
Downloading
http://xorg.freedesktop.org/releases/individual/proto/xextproto-
7.0.2.tar.bz2
--01:34:16--
On Tue, 30 May 2006 17:47:18 +0200, Rakotomandimby Mihamina wrote:
Let's suppose I find a mirror for this software, what's the way to
modify the ebuild into /var/... to consider the mirror I found at least
until the problem is solved?
You don't need to modify the ebuild. download the file
Tuesday 30 May 2006 16:19 skrev Neil Bothwick:
Or even
if [ -n $PS1 ]
or you'll get an error if PS1 is undefined.
That explains a LOT! ;) Didn't quite understand why the statement was true
even when the variable was not set...
--
Bo Andresen
pgpDLPBh4Hu7J.pgp
Description: PGP signature
On Tuesday 30 May 2006 10:23, Daniel da Veiga wrote:
On 5/29/06, Colleen Beamer [EMAIL PROTECTED] wrote:
Open up your e-mail client.
In the To: box type the following:
[EMAIL PROTECTED]
You don't need a subject or anything in the body. Send the e-mail.
You'll be unsubscribed.
On 5/30/06, Leandro Melo de Sales [EMAIL PROTECTED] wrote:
Richard,
when I change any rules, should I have to execute a command in order
to update the udev rules?
Usually you can run udevstart to get the new nodes activated
immediately. But if you are just going to reboot, this is not
Michael W. Holdeman wrote:
I lived most of my life as an American farmer, we don't want him either!
Michael W. Holdeman
He reminds me of Jerry Taylor from Tuttle County.
Kristian Poul Herkild
--
gentoo-user@gentoo.org mailing list
On 5/30/06, Leandro Melo de Sales [EMAIL PROTECTED] wrote:
Richard,
You said that one rule can override other, but if you read udev
manual ( http://www.reactivated.net/writing_udev_rules.html ), you'll
realize that what you said I think is incorrect.
That is _not_ the udev manual. I've
Hi,
Am Montag, 29. Mai 2006, 23:31:46 +0200 schrieb Bertram Scharpf:
Hi,
Am Montag, 29. Mai 2006, 21:59:31 +0200 schrieb Bertram Scharpf:
Hallo,
Sorry, wrong list.
This happens now to me the second time in two weeks. There
seems to be a deeper kind of problem ...
Misconfigured Mutt.
Hi! Where can I configure my fan? I have a Thinkpad R40 and the fan starts realy often. The thing is, the air coming out of the notebook is almost cold! Also the fan runs always in the highest mode. But is had at least 2 modes. I have all the acpi stuff enabled in the kernel but no bios-support.
Hi group,
The console fonts in my new LCD monitor are H-U-G-E.
Attempts to shrink them by adding vga=xxx at the grub
prompt after the kernel line has no effect. Here's the
entire grub session:
grub root (hd0,1)
grub kernel /vmlinuz vga=794 #1280x1024(so I'm told)
grub boot
I'm not using a
Hi folks,
does anyone known an FTP server, which can execute some
command after upload ?
thx
--
-
Enrico Weigelt== metux IT service - http://www.metux.de/
On Tue, 30 May 2006, Bertrand Jacquin wrote:
Hi,
My new IM (Jabber) adress is : [EMAIL PROTECTED]
My new email is : [EMAIL PROTECTED]
Beber
BCC is your friend!
--
gentoo-user@gentoo.org mailing list
Anyone has any idea about what will be the gentoo way to cope with the
no-more-tetex issue?
--
Jorge Almeida
--
gentoo-user@gentoo.org mailing list
On 5/30/06, maxim wexler [EMAIL PROTECTED] wrote:
Hi group,
The console fonts in my new LCD monitor are H-U-G-E.
Attempts to shrink them by adding vga=xxx at the grub
prompt after the kernel line has no effect. Here's the
entire grub session:
I'm not exactly sure, however, I'm making my best
Hey all.
I think this might be a dupe of a topic I've already submitted, but here
goes anyway.
To make it short, I want to be able to *print* Cyrillic fonts - I can
see them in console, emacs, etc - but now I want to print them, and I'm
having a hell of a time getting them to show up on my HP
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jorge Almeida wrote:
Anyone has any idea about what will be the gentoo way to cope with the
no-more-tetex issue?
There was a discussion about it a some days ago in the dev-list:
http://article.gmane.org/gmane.linux.gentoo.devel/38615
-BEGIN
On 5/30/06, Lord Sauron [EMAIL PROTECTED] wrote:
On 5/30/06, maxim wexler [EMAIL PROTECTED] wrote:
Hi group,
The console fonts in my new LCD monitor are H-U-G-E.
Attempts to shrink them by adding vga=xxx at the grub
prompt after the kernel line has no effect. Here's the
entire grub
maxim wexler wrote:
Hi group,
The console fonts in my new LCD monitor are H-U-G-E.
Attempts to shrink them by adding vga=xxx at the grub
prompt after the kernel line has no effect. Here's the
entire grub session:
grub root (hd0,1)
grub kernel /vmlinuz vga=794 #1280x1024(so I'm told)
grub
On 5/30/06, Daniel da Veiga [EMAIL PROTECTED] wrote:
On 5/30/06, Lord Sauron [EMAIL PROTECTED] wrote:
On 5/30/06, maxim wexler [EMAIL PROTECTED] wrote:
Hi group,
The console fonts in my new LCD monitor are H-U-G-E.
Attempts to shrink them by adding vga=xxx at the grub
prompt after the
On 5/30/06, Jorge Almeida [EMAIL PROTECTED] wrote:
Anyone has any idea about what will be the gentoo way to cope with the
no-more-tetex issue?
Have a look on
http://article.gmane.org/gmane.linux.gentoo.devel/38615/match=gentoo+dev+tetex
--
Beber
--
gentoo-user@gentoo.org mailing list
Hi everybody,
to establish gre tunnel, these commands have to be run:
(e.g. from local.start)
# ip tunnel add vpn0 mode gre remote 1.1.1.1 local 2.2.2.2 dev eth0
# ip addr add 3.3.3.3 dev vpn0
# ip link set vpn0 mtu 1420 up
Does anybody know, how to put it into /etc/conf.d/net ?
I didn't
On 5/29/06, Bo Ørsted Andresen [EMAIL PROTECTED] wrote:
Tuesday 30 May 2006 06:48 skrev Iain Buchanan: I see this [ x != x$BLAH ] test all over the place, especially in the /etc/init.d scripts.Maybe -z is not standardised or something?
Dunno why people use it.Having searched a little further I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
is there a legal way to change the shape of the Cursor in X.org ???
Thank you very much for any helpful reply in advance!
Keep hacking!
If you want it system-wide, try editing
/usr/share/cursors/xorg-x11/default/index.theme with the name of
On Tue, 30 May 2006, Bertrand Jacquin wrote:
On 5/30/06, Jorge Almeida [EMAIL PROTECTED] wrote:
Anyone has any idea about what will be the gentoo way to cope with the
no-more-tetex issue?
http://article.gmane.org/gmane.linux.gentoo.devel/38615/match=gentoo+dev+tetex
Thanks, Daniel and
On Tue, 30 May 2006 22:29:02 +0200, Norbert Kamenicky wrote:
to establish gre tunnel, these commands have to be run:
(e.g. from local.start)
# ip tunnel add vpn0 mode gre remote 1.1.1.1 local 2.2.2.2 dev eth0
# ip addr add 3.3.3.3 dev vpn0
# ip link set vpn0 mtu 1420 up
Does anybody
I am in the process of moving to an amd64 system and I anticipate a lot
of experimentation/tuning with the kernel.
I was wondering if it is possible to set up CVS (or preferably
Subversion) so that I would be able to back up to any previous
configuration. It seems that if I just kept the
On Tue, May 30, 2006 at 11:55:16AM -0700, maxim wexler wrote
Hi group,
The console fonts in my new LCD monitor are H-U-G-E.
Attempts to shrink them by adding vga=xxx at the grub
prompt after the kernel line has no effect.
In order to be able to do that, you have to enable it in the
It seems overkill for one file.
On Tue, 30 May 2006 16:17:58 -0500
Anthony E. Caudel wrote:
I am in the process of moving to an amd64 system and I anticipate a lot
of experimentation/tuning with the kernel.
I was wondering if it is possible to set up CVS (or preferably
Subversion) so
Tuesday 30 May 2006 23:17 skrev Anthony E. Caudel:
I was wondering if it is possible to set up CVS (or preferably
Subversion) so that I would be able to back up to any previous
configuration. It seems that if I just kept the .config file in cvs and
checked it in and out as needed that this
On Wed, 31 May 2006 00:27:59 +0200, Norbert Kamenicky wrote:
Ok, it will probably work (not tested yet), but ...
it's not a big difference if it is in local.start,
postup() function or some another script.)
There is one big difference. Running it from postup() means it is started
immediately
On Tue, 2006-05-30 at 11:57 -0700, Steven Susbauer wrote:
On Tue, 30 May 2006, Bertrand Jacquin wrote:
Hi,
My new IM (Jabber) adress is : [EMAIL PROTECTED]
My new email is : [EMAIL PROTECTED]
Beber
BCC is your friend!
yeah. On behalf of everyone in your contacts list,
Howdy,
My originally stable (x86) system has a lot of testing packages (via
package.keywords)
and I'm looking to switch to a pure testing system. I thought all that
was necessary
was to change x86 to ~x86 in make.conf's USE variable. No joy. emerge
--info still
shows stable x86. I'm an
On Tue, 30 May 2006 18:56:33 -0500, Teresa and Dale wrote:
And then you see that Daniel, your second candidate for the job hit the
send button 5 times...
;) couldn't resist.
I noticed that too. What's up with that? LOL
Possibly a gmail glitch, as all five copies had the same
Wednesday 31 May 2006 02:25 skrev Hemmann, Volker Armin:
and after that:
env-update
source /etc/profile
env-update update is for global environment changes which are made
in /etc/env.d/*. It has got nothing to do with /etc/make.conf. All he has to
do is add the ACCEPT_KEYWORDS to
On Tue, 30 May 2006 18:56:33 -0500, Teresa and Dale wrote:
And then you see that Daniel, your second candidate for the job hit the
send button 5 times...
;) couldn't resist.
I noticed that too. What's up with that? LOL
Possibly a gmail glitch, as all five copies had the same
Neil Bothwick wrote:
On Tue, 30 May 2006 18:56:33 -0500, Teresa and Dale wrote:
And then you see that Daniel, your second candidate for the job hit the
send button 5 times...
;) couldn't resist.
I noticed that too. What's up with that? LOL
Possibly a gmail glitch, as all
On 5/30/06, Teresa and Dale [EMAIL PROTECTED] wrote:
I was wondering about that. I have noticed that others do that
sometimes too. That made me wonder about his too.
I'm a gmail user, even though my address isn't a @gmail.com. I would
definitely appreciate it if you let me know if you see
On 5/30/06, Teresa and Dale [EMAIL PROTECTED] wrote:
Neil Bothwick wrote:
On Tue, 30 May 2006 18:56:33 -0500, Teresa and Dale wrote:
And then you see that Daniel, your second candidate for the job hit the
send button 5 times...
;) couldn't resist.
I noticed that too. What's up with
On 5/28/06, Colleen Beamer [EMAIL PROTECTED] wrote:
Hi all,
Yesterday, among the packages in my upgrade list was kde-3.5. After
getting the problem with perl-cleaner solved (thanks to the help on this
list), the upgrade went apparently smoothly.
According to what I read in some of the Gentoo
Richard Fish wrote:
On 5/30/06, Teresa and Dale [EMAIL PROTECTED] wrote:
I was wondering about that. I have noticed that others do that
sometimes too. That made me wonder about his too.
I'm a gmail user, even though my address isn't a @gmail.com. I would
definitely appreciate it if you
I am rebuilding my raid partition using mdadm that /home mounts to. It was a 3
disk raid 5 but I
was having problems keeping it synced during heavy writes.
Basically I want a Raid 1 partition w/ 1 hot spare. each drive is 300GB
Does anyone have advice on the parameter I should use to achieve
On 5/30/06, Teresa and Dale [EMAIL PROTECTED] wrote:
Richard Fish wrote:
On 5/30/06, Teresa and Dale [EMAIL PROTECTED] wrote:
I was wondering about that. I have noticed that others do that
sometimes too. That made me wonder about his too.
I'm a gmail user, even though my address isn't
On Wednesday 31 May 2006 02:47, Bo Ørsted Andresen wrote:
Wednesday 31 May 2006 02:25 skrev Hemmann, Volker Armin:
and after that:
env-update
source /etc/profile
env-update update is for global environment changes which are made
in /etc/env.d/*. It has got nothing to do with
I updated some programs and after this, everytime I go to a terminal,
type my username I got the following messages:
configuration error - unknown item 'FAILLOG_ENAB' (notify administrator)
configuration error - unknown item 'LASTLOG_ENAB' (notify administrator)
configuration error - unknown
79 matches
Mail list logo
